Template talk:Syscon pinout LQFP 128 pins: Difference between revisions
Jump to navigation
Jump to search
(→Missing lines: the sherwoods with 128 pins are not used with the 28nm RSX models using a 34x34 pad layout) |
|||
| Line 7: | Line 7: | ||
*SB_RESET (syscon output, to south bridge) | *SB_RESET (syscon output, to south bridge) | ||
*SB_CGRST (syscon output, to south bridge) | *SB_CGRST (syscon output, to south bridge) | ||
*RSX_RESET (syscon output, to RSX) <--------- Connected to [[RSX]] pad AW5 ([[Template:RSX pad layout 41x41|RSX layout 41x41 | *RSX_RESET (syscon output, to RSX) <--------- Connected to [[RSX]] pad AW5 ([[Template:RSX pad layout 41x41|RSX layout 41x41]]) ? | ||
*RSX_CGRST (syscon output, to RSX) <--------- Connected to [[RSX]] pad AV6 ([[Template:RSX pad layout 41x41|RSX layout 41x41 | *RSX_CGRST (syscon output, to RSX) <--------- Connected to [[RSX]] pad AV6 ([[Template:RSX pad layout 41x41|RSX layout 41x41]]) ? | ||
*RSX_VINTE1 / VD_VINT1 (syscon input, from RSX) <--------- Connected to [[RSX]] pad AL38 ([[Template:RSX pad layout 41x41|RSX layout 41x41 | *RSX_VINTE1 / VD_VINT1 (syscon input, from RSX) <--------- Connected to [[RSX]] pad AL38 ([[Template:RSX pad layout 41x41|RSX layout 41x41]]). Exists in [[Template:Syscon_pinout_LQFP_100_pins]] | ||
*RSX_FBVDD_SEL (syscon output, to RSX) <----- existence doubtful | *RSX_FBVDD_SEL (syscon output, to RSX) <----- existence doubtful | ||
*SW_HDD (syscon output, to HDD) <------------ existence doubtful | *SW_HDD (syscon output, to HDD) <------------ existence doubtful | ||
Revision as of 09:05, 23 March 2022
Bluray Drive, disc presence detector
There are 2 syscon pins dedicated to detect the disc insertion. One of pins powers a IR-LED (emitter), and the other pin is connected to a photo-transistor (receiver), both aligned with each other
When the disc interrupts the light beam a control signal is sent to syscon in the receiver pin. See BL1-001 and BL2-001
Missing lines
- POW_FAIL (syscon input, unknown source) <--- is the same than ACIN_DET pin 41 ?
- SB_RESET (syscon output, to south bridge)
- SB_CGRST (syscon output, to south bridge)
- RSX_RESET (syscon output, to RSX) <--------- Connected to RSX pad AW5 (RSX layout 41x41) ?
- RSX_CGRST (syscon output, to RSX) <--------- Connected to RSX pad AV6 (RSX layout 41x41) ?
- RSX_VINTE1 / VD_VINT1 (syscon input, from RSX) <--------- Connected to RSX pad AL38 (RSX layout 41x41). Exists in Template:Syscon_pinout_LQFP_100_pins
- RSX_FBVDD_SEL (syscon output, to RSX) <----- existence doubtful
- SW_HDD (syscon output, to HDD) <------------ existence doubtful