Wireless Keypad: Difference between revisions

Revision as of 18:57, 22 September 2017

The Wireless Keypad is designed to attach onto a SIXAXIS or DUALSHOCK 3 wireless controller.

To use the wireless keypad, the PS3 system must be on version 2.50 or later.

Before using the wireless keypad, you must first register or "pair" to the keypad and the PS3 system.

When using in touch pad mode, the wireless keypad can be used like a mouse.

MIC listing: 007WWCUL0319 September 25, 2008 (CECHZK1JP)

Anatel: 2062106223 29/09/2010 (CECHZK1MX)

DC 5V, 500mA

FW min: 2.50

Battery Supply: DC 3.7V

Go to your devices on PS4, and select bluetooth devices.
Then, turn off your ps3 keypad, hold the Blue shoulder button and turn it back on, keep holding the blue button until 3 buttons start flashing in sequence. This means it will now appear on your ps4's list of bluetooth devices.
Select it, it'll ask you to punch in a code, do so on the keypad, hit enter, and that'll synch it up correctly.

Same component used in Move Motion Controller

Similar to the BT modules used in DualShock 3

Same component used in Move Motion Controller

@@ Line 41: / Line 41: @@
 </gallery>
+==Components==
+===STM32F103 (MCU)===
+Same component used in [[Move Motion Controller]]
+===ALPS 502A (BT module)===
+Similar to the BT modules used in [[DualShock 3]]
+===Texas Instruments BRO===
+Same component used in [[Move Motion Controller]]
 {{Peripherals}}
 <noinclude>[[Category:Main]]</noinclude>