Template talk:Syscon pinout LQFP 128 pins: Difference between revisions
Jump to navigation
Jump to search
(→Missing lines: typo) |
|||
| Line 9: | Line 9: | ||
*RSX_RESET (syscon output, to RSX) | *RSX_RESET (syscon output, to RSX) | ||
*RSX_CGRST (syscon output, to RSX) | *RSX_CGRST (syscon output, to RSX) | ||
* | *VD_VINT1 (syscon input, from RSX) <------- exists in [[Template:Syscon_pinout_LQFP_100_pins]] | ||
* | *RSX_FBVDD_SEL (syscon output, to RSX) <--- existence doubtful | ||
*SW_HDD (syscon output, to HDD) | *SW_HDD (syscon output, to HDD) <---------- existence doubtful | ||
Revision as of 07:27, 23 March 2022
Bluray Drive, disc presence detector
There are 2 syscon pins dedicated to detect the disc insertion. One of pins powers a IR-LED (emitter), and the other pin is connected to a photo-transistor (receiver), both aligned with each other
When the disc interrupts the light beam a control signal is sent to syscon in the receiver pin. See BL1-001 and BL2-001
Missing lines
- POW_FAIL (syscon input, unknown source), is the same than ACIN_DET pin 41 ?
- SB_RESET (syscon output, to south bridge)
- SB_CGRST (syscon output, to south bridge)
- RSX_RESET (syscon output, to RSX)
- RSX_CGRST (syscon output, to RSX)
- VD_VINT1 (syscon input, from RSX) <------- exists in Template:Syscon_pinout_LQFP_100_pins
- RSX_FBVDD_SEL (syscon output, to RSX) <--- existence doubtful
- SW_HDD (syscon output, to HDD) <---------- existence doubtful