Template talk:Syscon pinout LQFP 128 pins: Difference between revisions
Jump to navigation
Jump to search
(→Missing lines: found) |
|||
| Line 7: | Line 7: | ||
*SB_RESET (syscon output, to south bridge) | *SB_RESET (syscon output, to south bridge) | ||
*SB_CGAST (syscon output, to south bridge) | *SB_CGAST (syscon output, to south bridge) | ||
*RSX_RESET (syscon output, to RSX) | *RSX_RESET (syscon output, to RSX) | ||
*RSX_CGAST (syscon output, to RSX) | *RSX_CGAST (syscon output, to RSX) | ||
*RSX_FBVDD_SEL (syscon output, to RSX) | *RSX_FBVDD_SEL (syscon output, to RSX) | ||
*VD_VINT1 (syscon input, from RSX) | *VD_VINT1 (syscon input, from RSX) | ||
*SW_HDD (syscon output, to HDD) | *SW_HDD (syscon output, to HDD) | ||
Revision as of 07:20, 23 March 2022
Bluray Drive, disc presence detector
There are 2 syscon pins dedicated to detect the disc insertion. One of pins powers a IR-LED (emitter), and the other pin is connected to a photo-transistor (receiver), both aligned with each other
When the disc interrupts the light beam a control signal is sent to syscon in the receiver pin. See BL1-001 and BL2-001
Missing lines
- POW_FAIL (syscon input, unknown source), is the same than ACIN_DET pin 41 ?
- SB_RESET (syscon output, to south bridge)
- SB_CGAST (syscon output, to south bridge)
- RSX_RESET (syscon output, to RSX)
- RSX_CGAST (syscon output, to RSX)
- RSX_FBVDD_SEL (syscon output, to RSX)
- VD_VINT1 (syscon input, from RSX)
- SW_HDD (syscon output, to HDD)