Template:PlayStation 3 controller PCB TestPoints: Difference between revisions

Revision as of 23:55, 24 September 2017

PlayStation 3 controller PCB TestPoints
[edit]
Controller Type	Prototype	Sixaxis				DualShock 3								ASUKA
TestPoints Relocations	0	1		2		3	4	5	6			7	8	NO
Board Model	PP1	PP4-	PP4+	V2	V2.5	VX	V3.5X	VX3	VX4	VX5	VX6	VX7	VX8	1.06	1.07
Total amount of testpoints									26	26	26
USB +5V	TP4 ?	TP1	TP1	TP1	TP1	TP1	TP1	TP1	TP1	TP1	TP1			T207
USB Data -		TP2	TP2	TP2	TP2	TP2	TP2	TP2	TP2	TP2	TP2			T206
USB Data +		TP3	TP3	TP3	TP3	TP3	TP3	TP3	TP3	TP3	TP3			T205
USB Ground (or Common Ground)	4x GND			TP21, TP22, TP23, TP24			TP4, TP5, TP6, TP7		4x GND					T509

Battery USB power good ?	TP6 ?								N/A
Battery charge start ?	TP7 ?								N/A
Battery charge setpoint pre ?	TP9								N/A
Battery charge setpoint post ?	TP64 ?								N/A
Battery status 1 ?	TP8 ?								TP8	TP15	TP31
Battery status 2 ?	TP10 ?								TP9	TP9	TP32

Bluetooth Module, unknown									TP10	TP11	TP26			T504 ?
2.8V Standby. Power for MCU, EEPROM, BT, , and 4x LED		TP10	TP10	TP62	TP62	TP62	TP51	TP11	TP11	TP10	TP29			T507	T507
2.8V Switched. Power for Accelerometer and Gyroscope									TP12	TP12	TP28	UNL		T506	T506
2.8V Switched. Power for 4x Stick pots								TP13	TP13	TP13	TP27			T505
2.8V Switched. Power for vibration motors	3.0V ?								TP42	TP8	TP25	UNL		T501
3.7V Battery +	TP5 ?							TP14	TP14	TP14	TP30			T508

COM 1. Common Line for Analog		TP17	TP17	TP25	TP25	TP25	TP17	TP17	TP17	TP17	TP14	UNL		T101
COM 2. Common Line for Analog $Dualshock cross button$		TP18	TP18	TP26	TP26	TP26	TP18	TP18	TP18	TP18	TP15	UNL		T102
COM 3. Common Line for Digital		TP60	TP60	N/A

LX (Stick Left X axis 0V~2.8V)		TP19 ?		TP27 ?			TP19 ?	TP19 ?	TP19 ?	TP19 ?	TP16 ?			T103
LY (Stick Left Y axis 0V~2.8V)		TP20 ?		TP28 ?			TP20 ?	TP20 ?	TP20 ?	TP20 ?	TP17 ?			T104
RX (Stick Right X axis 0V~2.8V)		TP21 ?		TP29 ?			TP21 ?	TP21 ?	TP21 ?	TP21 ?	TP18 ?			T105
RY (Stick Right Y axis 0V~2.8V)		TP22 ?		TP30 ?			TP22 ?	TP22 ?	TP22 ?	TP22 ?	TP19 ?			T106
Toshiba T6UN6EFG pin 69, unknown				TP31 ?	TP31 ?	TP31 ?	TP23	TP23	TP23	TP23	TP20

PlayStation (Home Button)		TP26	TP26	TP32	TP32	TP32	TP24	N/A
Start		TP27	TP27	TP33	TP33	TP33	TP25	N/A
R3 (Right Stick Press button)		TP28	TP28	TP34	TP34	TP34	TP26	N/A
L3 (Left Stick Press button)		TP29	TP29	TP35	TP35	TP35	TP27	N/A
Select		TP30	TP30	TP36	TP36	TP36	TP28	N/A

Square		TP37	TP37	TP38	TP38	TP38	TP30	N/A
$Dualshock cross button$ Cross		TP31	TP31	TP39	TP39	TP39	TP31	N/A
Circle		TP38	TP38	TP40	TP40	TP40	TP32	N/A
Triangle		TP39	TP39	TP41	TP41	TP41	TP33	N/A
R1		TP32	TP32	TP42	TP42	TP42	TP34	N/A
R2		TP33	TP33	TP43	TP43	TP43	TP35	N/A

L1		TP34	TP34	TP45	TP45	TP45	TP37	N/A
L2		TP41	TP41	TP46	TP46	TP46	TP38	N/A
Left (D-pad Left)		TP35	TP35	TP47	TP47	TP47	TP39	N/A
Down (D-pad Down)		TP42	TP42	TP48	TP48	TP48	TP40	N/A
Right (D-pad Right)		TP43	TP43	TP49	TP49	TP49	TP41	N/A
Up (D-pad Up)		TP44	TP44	TP50	TP50	TP50	TP42	N/A

Bluetooth module (unknown 1)		CON				TP74	TP47	UNL				TP23	UNL ?
Bluetooth module (unknown 2)		CON				TP75	TP48	UNL				TP24	UNL ?
Bluetooth module (unknown 3)		CON				TP76	TP49	UNL				TP25	UNL ?
Bluetooth module (unknown 4)		CON				TP77	TP50	UNL				TP26	UNL ?

Accelerometer Y-Axis (raw signal)									TP32	TP32	TP8			T302
Accelerometer X-Axis (raw signal)									TP33	TP33	TP9			T303
Accelerometer Z-Axis (raw signal)									TP34	TP34	TP10			T301
Accelerometer Y-Axis (filtered signal)							TP54 ?		TP35	TP35	TP11			T305
Accelerometer X-Axis (filtered signal)							TP55 ?		TP36	TP36	TP12			T306
Accelerometer Z-Axis (filtered signal)							TP56 ?		TP37	TP37	TP13			T304

Gyroscope (filtered signal)									TP40	TP40	TP33
Gyroscope (raw signal)	TP26 ?								TP41	TP41	TP34

To all wiki contributors.

Below this line are notes that are not going to be included in the pages where is used this template, only affects to the sisaxix PP4 and V2 boards. Are some tespoints i copyed from sowhere and was added here at the time of making this template because i wanted to keep a record of them but was not accurate enought. If at some point someone verifyes them please add them to the table and delete them from here

If eventually someone adds more rows to the table keep in mind that some board models tespoints has been listed completly in the table, this is why there is a row named Total amount of testpoints to verify how many are in the table by counting them. When adding a new row to the table please add a N/A to the boards that was completed

PlayStation 3 controller PCB TestPoints
[edit]
Usage	Proto	Sixaxis		DualShock 3							Others
	PP series		V series	VX series							ASUKA
	PP1	PP4	V2	VX 1	V3.5X	VX3	VX4	VX5	VX6	VX7	1.06	1.07
Unknown					TP15	TP15
Unknown (Toshiba T6UN6EFG, pin 69?)		TP23
Unknown		TP45
Unknown		TP46
Unknown		TP47
Unknown (Accelerometer Y-Axis Raw ?)		TP52
Unknown (Accelerometer X-Axis Raw ?)		TP53
Unknown (Accelerometer Z-Axis Raw ?)		TP54
Unknown (Accelerometer Y-Axis filtered ?)		TP55
Unknown (Accelerometer X-Axis filtered ?)		TP56
Unknown (Accelerometer Z-Axis filtered ?)		TP57	TP57
Unknown (gyro?)		TP59
N/A	N/A

@@ Line 38: / Line 38: @@
 | {{cellcolors|#ff9933}} 2.8V Standby. Power for MCU, EEPROM, BT, {{padps}}, and 4x LED ||  || TP10 || TP10 || TP62 || TP62 || TP62 || TP51 || TP11 || <abbr title="Connected to: Texas Instruments SN89062 pin 22, Toshiba T6UN6EFG pins 2, 5, 10, 21, 33, 51, 73, and STMicroelectronics 504RP pins 3, 7, 8, and ALPS 413A pins 25, 27, and SA1Q194A pins 8, 14, and 4x LEDS + ">TP11</abbr> || TP10 || TP29 ||  ||  || T507 || T507
 |-
-| {{cellcolors|#ff9933}} 2.8V Switched. Power for Accelerometer and Gyroscope ||  ||  ||  ||  ||  ||  ||  ||  || <abbr title="Connected to: Texas Instruments SN89062 pin 23, STMicroelectronics Y35A pins 1 , 9 (gyroscope), and STMicroelectronics 32S3 pins 1, 2, 3, 4, 13, 14 or Kionix KXSC4 pins 4, 5, 7 (accelerometers compatibles)">TP12</abbr> || TP12 || TP28 ||  ||  || T506 || T506
+| {{cellcolors|#ff9933}} 2.8V Switched. Power for Accelerometer and Gyroscope ||  ||  ||  ||  ||  ||  ||  ||  || <abbr title="Connected to: Texas Instruments SN89062 pin 23, STMicroelectronics Y35A pins 1 , 9 (gyroscope), and STMicroelectronics 32S3 pins 1, 2, 3, 4, 13, 14 or Kionix KXSC4 pins 4, 5, 7 (accelerometers compatibles)">TP12</abbr> || TP12 || TP28 || colspan="2" {{cellcolors|lightgrey||center}} <abbr title="Next to the reset button">UNL</abbr> || T506 || T506
 |-
 | {{cellcolors|#ff9933}} 2.8V Switched. Power for 4x Stick {{padlx}}{{padly}} {{padrx}} {{padry}} pots ||  ||  ||  ||  ||  ||  ||  || TP13 || <abbr title="Connected to: Texas Instruments SN89062 pin 24, and four Sticks potentiometers pin 3">TP13</abbr> || TP13 || TP27 ||  ||  || T505 ||
 |-
-| {{cellcolors|#ff9933}} 2.8V Switched. Power for vibration motors || 3.0V ? ||  ||  ||  ||  ||  ||  ||  || <abbr title="Connected to: Texas Instruments SN89062 pin 8, and SM+, BM+ (Small and Big Motor +)">TP42</abbr> || TP8 || TP25 ||  ||  || T501 ||
+| {{cellcolors|#ff9933}} 2.8V Switched. Power for vibration motors || 3.0V ? ||  ||  ||  ||  ||  ||  ||  || <abbr title="Connected to: Texas Instruments SN89062 pin 8, and SM+, BM+ (Small and Big Motor +)">TP42</abbr> || TP8 || TP25 || colspan="2" {{cellcolors|lightgrey||center}}<abbr title="In one of the pins of the KE4 motor controller">UNL</abbr> || T501 ||
 |-
 | {{cellcolors|#ff3333}} <abbr title="The battery is rated 3.7V but the real voltage is in between 4V~5V">3.7V</abbr> Battery + || <abbr title="connected to Texas Instruments BKO pin 10. And connected with VCC1 testpoint ?">TP5 ?</abbr> ||  ||  ||  ||  ||  ||  || TP14 || <abbr title="Connected to: Texas Instruments SN89062 pin 16, and battery +, and 194K resistor to Toshiba T6UN6EFG pin 4">TP14</abbr> || TP14 || TP30 ||  ||  || T508 ||

Template:PlayStation 3 controller PCB TestPoints: Difference between revisions

Revision as of 23:55, 24 September 2017

Navigation menu

Search