Template:DSW-001 pinout: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
mNo edit summary
mNo edit summary
Line 3: Line 3:
! rowspan="2" | Pin !! colspan="2" | Signal/Connected to !! rowspan="2" | Description
! rowspan="2" | Pin !! colspan="2" | Signal/Connected to !! rowspan="2" | Description
|-
|-
! On Motherboard<!--// <BR />(Syscon [[SW2-30x]] pins)  //-->  !! On Switch board
! On Motherboard !! On Switch board
|-
|-
| 1 || style="color:white; background-color:green;" | pin13 @ Syscon || style="color:white; background-color:green;" | Pogo Pin || style="color:white; background-color:green;" | Only This line have pogo pin @ switchboard, seems that it is a service pin.
| 1 || style="color:white; background-color:green;" | Syscon [[SW2-30x]], pin 13 || style="color:white; background-color:green;" | Pogo Pin || style="color:white; background-color:green;" | Only This line have pogo pin @ switchboard, seems that it is a service pin.
|-
|-
| 2 || style="color:white; background-color:darkgrey;" | pin12 @ Syscon || 4x CONTOUR LEDs || Not used by default.<br />On Switch board is connected to a transistor driving 3 LEDs  TWO BLUE AND ONE RED.
| 2 || style="color:white; background-color:darkgrey;" | Syscon [[SW2-30x]], pin 12 || 4x CONTOUR LEDs || Not used by default.<br />On Switch board is connected to a transistor driving 3 LEDs  TWO BLUE AND ONE RED.
|-
|-
| 3 || pin11 @ Syscon || 4x WHITE LEDs|| Inner light for power and eject switches.
| rowspan="2" | 3 || rowspan="2" | Syscon [[SW2-30x]], pin 11 || 2x WHITE LEDs, ground pins || Inner LEDs for EJECT button backlight, with a currentlimitor resistor of 910 {{ohm}}
|-
|-
| 4 || pin110 @ Syscon || POWER switch || Sink to ground to activate.
| 2x WHITE LEDs, ground pins || Inner LEDs for POWER button backlight, with a currentlimitor resistor of 1K {{ohm}}
|-
|-
| 5 || pin111 @ Syscon || EJECT switch || Sink to ground to activate.
| 4 || Syscon [[SW2-30x]], pin 110 || POWER switch || Sink to ground to activate. {{buttonpower}}
|-
|-
| 6 || pin5 @ Syscon || GREEN led || Connects to bottom-left corner pin (green gnd) of dual red/green LED over power switch.
| 5 || Syscon [[SW2-30x]], pin 111 || EJECT switch || Sink to ground to activate. {{buttoneject}}
|-
|-
| 7 || pin6 @ Syscon || RED led || Connects to top-left corner pin (red gnd) of dual red/green LED over power switch.
| 6 || Syscon [[SW2-30x]], pin 5 || GREEN led || Connects to bottom-left corner pin (green gnd) of dual red/green LED over power switch.
|-
|-
| 8 || pin13 @ BD_Connector || BLUE led || Connects to blue LED over eject switch.
| 7 || Syscon [[SW2-30x]], pin 6 || RED led || Connects to top-left corner pin (red gnd) of dual red/green LED over power switch.
|-
| 8 || BD_Connector, pin 13 || BLUE led || Connects to blue LED over eject switch.
|-
|-
| 9 || style="color:white; background-color:#333333;" | GND || style="color:white; background-color:#333333;" | GND || style="color:white; background-color:#333333;" | Ground
| 9 || style="color:white; background-color:#333333;" | GND || style="color:white; background-color:#333333;" | GND || style="color:white; background-color:#333333;" | Ground
|-
|-
| 10 || style="color:white; background-color:#CC3333;" | VCC || style="color:white; background-color:#CC3333;" | VCC || style="color:white; background-color:#CC3333;" | +5V DC VCC
| 10 || style="color:white; background-color:#CC3333;" | CN101 [[Power Supply]], pin1 ? || style="color:white; background-color:#CC3333;" | VCC || style="color:white; background-color:#CC3333;" | +5V DC VCC
|-
|-
|}
|}
* above top panel view port behind pcb. resistors was not tested.
* above top panel view port behind pcb. resistors was not tested.
<noinclude>[[Category:Templates]]</noinclude>
<noinclude>[[Category:Templates]]</noinclude>

Revision as of 06:59, 19 July 2017

DSW-001 Pinout
[edit]
Pin Signal/Connected to Description
On Motherboard On Switch board
1 Syscon SW2-30x, pin 13 Pogo Pin Only This line have pogo pin @ switchboard, seems that it is a service pin.
2 Syscon SW2-30x, pin 12 4x CONTOUR LEDs Not used by default.
On Switch board is connected to a transistor driving 3 LEDs TWO BLUE AND ONE RED.
3 Syscon SW2-30x, pin 11 2x WHITE LEDs, ground pins Inner LEDs for EJECT button backlight, with a currentlimitor resistor of 910 Ω
2x WHITE LEDs, ground pins Inner LEDs for POWER button backlight, with a currentlimitor resistor of 1K Ω
4 Syscon SW2-30x, pin 110 POWER switch Sink to ground to activate. PS3 power button
5 Syscon SW2-30x, pin 111 EJECT switch Sink to ground to activate. PS3 eject button
6 Syscon SW2-30x, pin 5 GREEN led Connects to bottom-left corner pin (green gnd) of dual red/green LED over power switch.
7 Syscon SW2-30x, pin 6 RED led Connects to top-left corner pin (red gnd) of dual red/green LED over power switch.
8 BD_Connector, pin 13 BLUE led Connects to blue LED over eject switch.
9 GND GND Ground
10 CN101 Power Supply, pin1 ? VCC +5V DC VCC
  • above top panel view port behind pcb. resistors was not tested.
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Template:DSW-001_pinout&oldid=45168"