Talk:Regulators: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
 
(34 intermediate revisions by 2 users not shown)
Line 5: Line 5:
By looking at the first syscon model used by the PS3 [[CXR713120-201GB]] where we know the names of the pin signals it seems these syscon control lines for voltage regulators could be the syscon pins named SW_x or SW_x_x (switches, used as a generic name for slave components that only has 2 states)
By looking at the first syscon model used by the PS3 [[CXR713120-201GB]] where we know the names of the pin signals it seems these syscon control lines for voltage regulators could be the syscon pins named SW_x or SW_x_x (switches, used as a generic name for slave components that only has 2 states)


==== Mitsumi 463A (voltage regulator) ====
==== Mitsumi 463A (STBY) ====
<div style="float:right">[[File:Mitsumi 463A.jpg|200px|thumb|left|Mitsumi voltage regulator 463A<br />Seen on a JSD-001 motherboard]]</div>
<div style="float:right">[[File:Mitsumi 463A.jpg|200px|thumb|left|Mitsumi voltage regulator 463A<br />Seen on a JSD-001 motherboard]]</div>


{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
|- bgcolor="#cccccc"
|- bgcolor="#cccccc"
! Pin !! Signal !! Description
! Pin # !! Name !! Description
|-
|-
| 1 || 5V_EVER || From power supply 5v standby rail (pin 1 of connector CN101)
| 1 || {{cellcolors|#ff0000}} 5V_EVER || Input 5v standby rail, from power supply (pin 1 of connector CN101)
|-
|-
| 2 || 3.3V_EVER_B || 3.3v_standby_rail_2
| 2 || {{cellcolors|#ffcc22}} 3.3V_EVER_B || Output 3.3v standby rail 2
|-
|-
| 3 || ? || Goes under package to the black 100 ohm resistor at its right, and from there to syscon SWx-x pin 26
| 3 || {{cellcolors|#33cc33|#ffffff}} RST/SYSCON_RST || Goes under package to the black 100 ohm resistor at its right, and from there to syscon pin26@[[SW2-303]]
|-
|-
| 4 || ? || Goes under package to squared testpad/sinkhole at its right (not connected ?)
| 4 || ? || Goes under package to squared testpad/sinkhole at its right (not connected ?)
|-
|-
| 5 || V ? || To a capacitor, and from there to ground
| 5 || {{cellcolors|#ff0000}} VCAP || Capacitor to ground
|-
|-
| 6 || ? || To squared testpad/sinkhole at its top (not connected ?)
| 6 || ? || To squared testpad/sinkhole at its top (not connected ?)
|-
|-
| 7 || GND || Ground
| 7 || {{cellcolors|#000000|#aaaaaa}} GND || Ground
|-
|-
| 8 || 3.3V_EVER_A || 3.3v_standby_rail_1
| 8 || {{cellcolors|#ffcc22}} 3.3V_EVER_A || Output 3.3v standby rail 1
|-
|-
|}
|}
{{clear}}
{{clear}}


==== Mitsumi 348A (voltage regulator) ====
==== Mitsumi 348A (HDMI) ====
<div style="float:right">[[File:Mitsumi 348A.jpg|200px|thumb|left|Mitsumi voltage regulator 348A<br />Seen on a JSD-001 motherboard]]</div>
<div style="float:right">[[File:Mitsumi 348A.jpg|200px|thumb|left|Mitsumi voltage regulator 348A<br />Seen on a JSD-001 motherboard]]</div>
*Part No: '''Mitsumi MM3348'''
*Datasheet: https://www.mitsumi.co.jp/latest/Catalog/pdf/regulate_mm_3348_e.pdf


{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
|- bgcolor="#cccccc"
|- bgcolor="#cccccc"
! Pin !! Signal !! Description
! Pin # !! Name !! Description
|-
|-
| 1 || ? || Not connected ?
| 1 || {{cellcolors|#ddd}} N/C || Not connected
|-
|-
| 2 || ? || Connected to syscon SWx-x pin 119
| 2 || {{cellcolors|#33cc33|#ffffff}} HDMI_EN || Connected to [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]] pin 119<br>Connected to [[HDMI]] [[Connectors#HDMI_Out|connector]] pin 18 (+5V output) through a <abbr title="Labeled AROKE, located next to the HDMI connector, it have a thick copper trace for a voltage of the HDMI connector)>transistor</abbr>
|-
|-
| 3 || GND || Ground
| 3 || {{cellcolors|#000000|#aaaaaa}} GND || Ground (this pin also dissipates heat to the circuit board ground layer)
|-
|-
| 4 || ? || output voltage rail 1 ?. Connected to pin 100 (and other 10 pins more) of HDMI controller. It has a testpad at the other side
| 4 || {{cellcolors|#ffcc22}} HDMI_VCC1 / +5V_ANA ? || Connected to [[HDMI]] controller [[MN8647091]] pin 100 (and a lot more pins). It have a testpad at the other board side
|-
|-
| 5 || ? || output voltage rail 2 for A/V controller and optical ? (not tested). It has a testpad at the other side
| 5 || {{cellcolors|#ffcc22}} HDMI_VCC2 / +3.3V_ANA ? || Connected to [[HDMI]] controller [[MN8647091]] pin 25 (and a lot more pins). It have a testpad at the other board side
|-
|-
| 6 || GND || Ground
| 6 || {{cellcolors|#000000|#aaaaaa}} GND || Ground (this pin also dissipates heat to the circuit board ground layer)
|-
|-
| 7 || ? || Connected to syscon SWx-x pin 119
| 7 || {{cellcolors|#33cc33|#ffffff}} HDMI_EN || Connected to [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]] pin 119<br>Connected to [[HDMI]] [[Connectors#HDMI_Out|connector]] pin 18 (+5V output) through a <abbr title="Labeled AROKE, located next to the HDMI connector, it have a thick copper trace for a voltage of the HDMI connector)>transistor</abbr>
|-
|-
| 8 || 5V_EVER || From power supply 5v standby rail (pin 1 of connector CN101)
| 8 || {{cellcolors|#ff0000}} 5V_EVER || Connected to [[Power Supply]] control connector (CN101) pin 1
|-
|-
|}
|}
{{clear}}
{{clear}}


==== Mitsumi 040 810X (close to RSX) ====
==== Mitsumi 810X (RSX RAM) ====
<div style="float:right">[[File:Mitsumi 810x.jpg|200px|thumb|left|Mitsumi voltage regulator 810x]]</div>
*Part No: '''Mitsumi MM1810XFBE'''
*Datasheet: <abbr title="Missing In Action>M.I.A.</abbr>. Pinout similar than https://www.mitsumi.co.jp/latest/Catalog/pdf/regulate_mm_185x_e.pdf (page 4)


{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
|- bgcolor="#cccccc"
|- bgcolor="#cccccc"
! Pin !! Signal !! Description
! Pin # !! Name !! Description
|-
|-
| 1 || ? || connected to 4x sinkholes (it has a testpad at the other side)
| 1 || {{cellcolors|#ffcc22}} RSX_VDDR || connected to a lot of pads of the [[RSX]], it has a testpad at the other board side
|-
|-
| 2 || ? || hidden under package
| 2 || {{cellcolors|#ddd}} N/C || Not connected
|-
|-
| 3 || GND || Ground
| 3 || {{cellcolors|#000000|#aaaaaa}} GND || Ground
|-
|-
| 4 || ? ||  
| 4 || {{cellcolors|#ff0000}} NOISE_CAP || Noise decrease pin. 0.01μF capacitor to GND, and to a tiny squared testpad
|-
|-
| 5 || ? || Connected to syscon SWx-x pin 75
| 5 || {{cellcolors|#33cc33|#ffffff}} EN ?/Cont/Control || Connected to syscon pin75@[[SW2-303]]
|-
|-
| 6 || ? || hidden under package
| 6 || {{cellcolors|#ddd}} N/C || Not connected
|-
|-
| 7 || ? || hidden under package
| 7 || {{cellcolors|#ddd}} N/C || Not connected
|-
|-
| 8 || ? || connected to 2x sinkholes
| 8 || {{cellcolors|#ff0000}} VIN || connected to 2x sinkholes
|-
|-
|}
|}
Line 87: Line 92:
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
|- bgcolor="#cccccc"
|- bgcolor="#cccccc"
! Pin !! Signal !! Description
! Pin # !! Name !! Description
|-
|-
| 1 || V_OUT <!-- not official name --> || capacitor and 180 ohm resistor to ground... then to 4 sinkholes and at the other side NOR VCC 3.3v (testpoint)
| 1 || {{cellcolors|#ffcc22}} OUT/NOR ? || capacitor and 180 ohm resistor to ground... then to 4 sinkholes and at the other side NOR VCC 3.3v (testpoint)
|-
|-
| 2 || GROUND ||  
| 2 || {{cellcolors|#000000|#aaaaaa}} GND ||  
|-
|-
| 3 || GROUND ||  
| 3 || {{cellcolors|#000000|#aaaaaa}} GND ||  
|-
|-
| 4 || ? || capacitor to ground
| 4 || ? || Capacitor to ground
|-
|-
| 5 || ? || Dissapears in a sinkhole and emerges near syscon, connected to SWx-x pin 50
| 5 || {{cellcolors|#33cc33|#ffffff}} EN ? || Connected to pin50@[[SW2-303]]. And pin 3 @ Service Connector
|-
|-
| 6 || GROUND ||  
| 6 || {{cellcolors|#000000|#aaaaaa}} GND ||  
|-
|-
| 7 || GROUND ||  
| 7 || {{cellcolors|#000000|#aaaaaa}} GND ||  
|-{{cellcolors|red}}
|-
| 8 || V_IN_1 <!-- not official name --> || connected to BD9684 pins 3,8,17
| 8 || {{cellcolors|#ff0000}} VCC ? || To fuse/thermistor [[Talk:Protection | TH7601]]
|-
|-
|}
|}


====BD3525====
==== BD9684 0906 ====
<!-- BluRay ? -->


{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
|- bgcolor="#cccccc"
|- bgcolor="#cccccc"
! Pin !! Signal !! Description
! Pin # !! Name !! Description
|-
| 1 || ? || sealed coil... then to 8 sinkholes... to BD controller, etc...
|-
| 2 || ? || dissapears under package
|-
| 3 || {{cellcolors|#ff0000}} VCC ? || 0.400mf capacitor to ground, and to fuse/thermistor [[Talk:Protection | TH7601]]
|-
| 4 || {{cellcolors|#33cc33|#ffffff}} EN ? || to a sinkhole... at the other side 3.3K resistor to ground, then connected to pins 2 and 3 of a dual transistor (base of TR1, and collector of TR2)<br>pin 5 of the dual transistor (base of TR2) is connected to a long trace that dies in a sinkhole and emerges under syscon, connected to pin42@[[SW2-303]]<br>the emitter pins of the dual transistor (1 and 4) are connected to a common ground
|-
| 5 || {{cellcolors|#000000|#aaaaaa}} GND ||
|-
| 6 || {{cellcolors|#000000|#aaaaaa}} GND ||
|-
| 7 || || dissapears under package
|-
|-
| 1 || rowspan="5" | OUT || rowspan="5" | (Output voltage pin) to 4 sinkholes... at the other side to electrolitic capacitor 2.5v 330
| 8 || {{cellcolors|#ff0000}} VCC ? || 0.400mf capacitor to ground, and to fuse/thermistor [[Talk:Protection | TH7601]]
|-
|-
| 2
| 9 || ? || dissapears under package
|-
| 10 || ? || sealed coil... then tied to pin 11
|-
|-
| 3
| 11 || ? || to 6 sinkholes... at the other side to unpopulated service connector... etc...
|-
|-
| 4
| 12 || rowspan="2" | ? || rowspan="2" | Capacitor to ground, to a 4x-sinkhole... then to BD controller
|-
|-
| 5
| 13
|-
|-
| 6 || VOS || (Output voltage control pin) Shorten with Out pins
| 14 || {{cellcolors|#000000|#aaaaaa}} GND ||  
|-
|-
| 7 || FB || (Reference voltage feedback pin) diode to ground, and capacitor to ground, and diode to 55.8 ohm resistor to pin 1 <!--weird, i dont get it -->
| 15 || ? || to a sinkhole... at the other side to BD controller
|-
|-
| 8 || NRCS || (Non Rush Current on Start-up capacitor connection pin) capacitor to ground
| 16 || ? || dissapears under package
|-
|-
| 9 || GND || (Ground pin)
| 17 || {{cellcolors|#ff0000}} VCC ? || 0.400mf capacitor to ground, and to fuse/thermistor [[Talk:Protection | TH7601]]
|-
|-
| 10 || GND || (Ground pin)
| 18 || ? || towards blu ray laser connector
|-{{cellcolors|red}}
| 11 || VCC || (Power supply pin) connected to BD9684 pins 3,8,17
|-
|-
| 12 || EN || (Enable input pin) 46Kohm resistor to ground, and a trace that dissapears in a sinkhole and emerges near syscon, connected to SWx-x pin 52
| 19 || ? || tied to pin 1
|-
|-
| 13 || SCP || (Short Circuit Protection delay  time  setting  capacitor connection pin)
| 20 || ? || to a sinkhole... then to pin 6 of the same dual transistor (collector of TR1)
|-{{cellcolors|orange}}
| 14 || VD || (IN input voltage detect pin) shorten with IN pins
|-{{cellcolors|orange}}
| 15 || rowspan="6" | IN || rowspan="6" |  (Input voltage pin) 0.400mf capacitor to ground, to 4 sinkholes connected to BD3527 (near usb) pins 14 up to 20 and BD3527 (near flash) pins 14 up to 20
|-{{cellcolors|orange}}
| 16
|-{{cellcolors|orange}}
| 17
|-{{cellcolors|orange}}
| 18
|-{{cellcolors|orange}}
| 19
|-{{cellcolors|orange}}
| 20
|-
|-
|}
|}


====BD3527====
====Rohm BD3525====
There are 2 BD3527 on JSD-001 motherboard, one near flash and the other near usb connectors
<!-- SouthBridge ? -->


'''near flash'''
{| class="wikitable"
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
|+BD3525 pinout
|- bgcolor="#cccccc"
! Pin # !! Name !! Description !! Connections
! Pin !! Signal !! Description
|-
|-
| 1 || rowspan="6" | V_OUT_x ? || rowspan="6" | to 3 smd components to gnd, to electrolitic capacitor 2.5v 330, to 3 sinkholes with a testpoint at the other side
| 1 || rowspan="5" {{cellcolors|#ffcc22}} OUT || rowspan="5" | Output voltage || rowspan="5" | To 4 sinkholes... at the other side to electrolitic capacitor 2.5v 330... and to ???
|-
|-
| 2
| 2
Line 173: Line 178:
| 5
| 5
|-
|-
| 6
| 6 || {{cellcolors|#ffcc22}} VOS || Output voltage control || Shorten with OUT pins
|-
| 7 || {{cellcolors|#ffcc22|#ff0000}} FB || Reference voltage feedback || Diode to ground, and capacitor to ground, and diode to 55.8 ohm resistor to OUT pins
|-
| 8 || {{cellcolors|#11bbee}} NRCS || Non Rush Current on Start-up || Capacitor to ground
|-
| 9 || {{cellcolors|#000000|#aaaaaa}} GND || Ground ||
|-
| 10 || {{cellcolors|#000000|#aaaaaa}} GND || Ground ||
|-
|-
| 7 || ? || capacitor and 1600 ohm resistor to pin 1
| 11 || {{cellcolors|#ff0000}} VCC || Power supply || To fuse/thermistor [[Talk:Protection | TH7601]]
|-
|-
| 8 || ? || diode ? to ground
| 12 || {{cellcolors|#33cc33|#ffffff}} EN || Enable input || 46Kohm resistor to ground, and a trace that dissapears in a sinkhole and emerges near syscon, connected to pin52@[[SW2-303]]
|-
|-
| 9 || GROUND ||  
| 13 || {{cellcolors|#11bbee}} SCP || Short Circuit Protection delay  time  setting || Capacitor to ground
|-
|-
| 10 || GROUND ||
| 14 || {{cellcolors|#ff8822}} VD || Input voltage detect || Shorten with IN pins
|-{{cellcolors|red}}
| 11 || V_IN_1 <!-- not official name --> || connected to BD9684 pins 3,8,17
|-
|-
| 12 || ? || dissapears in a sinkhole (resistor 23Kohm to ground in the other side) and emerges near syscon, connected to SWx-x pin 95
| 15 || rowspan="6" {{cellcolors|#ff8822}} IN || rowspan="6" |  Input voltage || rowspan="6" | 0.400mf capacitor to ground, to 4 sinkholes connected to BD3527 (near usb) pins 14 up to 20 and BD3527 (near flash) pins 14 up to 20... and to ???
|-
|-
| 13 || ? || dissapears in a sinkhole (capacitor 915nf to ground in the other side)
|-{{cellcolors|orange}}
| 14 || rowspan="7" | V_IN_2 <!-- not official name --> || rowspan="7" | to 3 sinkholes missing at the other side, to 4 sinkholes connected to BD3525 pins 14 up to 20
|-{{cellcolors|orange}}
| 15
|-{{cellcolors|orange}}
| 16
| 16
|-{{cellcolors|orange}}
|-
| 17
| 17
|-{{cellcolors|orange}}
|-
| 18
| 18
|-{{cellcolors|orange}}
|-
| 19
| 19
|-{{cellcolors|orange}}
|-
| 20
| 20
|-
|}
|}


'''near usb'''
====Rohm BD3527====
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
There are 2 BD3527 on JSD-001 motherboard, one is located near flash and the other near usb connectors
|- bgcolor="#cccccc"
 
! Pin !! Signal !! Description
<!-- for GDDR3 RAM chips ? (4x64MB)... and each BD3527 powers 2 RAM chips ?)-->
 
{| class="wikitable"
|+BD3527 (near flash) pinout
! Pin # !! Name !! Description !! Connections
|-
|-
| 1 || rowspan="6" | V_OUT_x ? || rowspan="6" | 88 ohm resistor to ground, to a testpoint, to 4 sinkholes and to the other side to electrolitic capacitor 2.5v 330 (very close to a ram chip)
| 1 || rowspan="5" {{cellcolors|#ffcc22}} OUT ? || rowspan="5" | Output voltage ? || rowspan="5" | to 3 smd components to gnd, to electrolitic capacitor 2.5v 330, to 3 sinkholes with a testpoint at the other side
|-
|-
| 2
| 2
Line 220: Line 228:
| 5
| 5
|-
|-
| 6
| 6 || {{cellcolors|#ffcc22}} VOS ? || Output voltage control ? || Shorten with OUT pins
|-
| 7 || {{cellcolors|#ffcc22|#ff0000}} FB ? || Reference voltage feedback ? || Capacitor and 1600 ohm resistor to OUT pins
|-
|-
| 7 || ? || capacitor and 1600 ohm resistor to pin 1
| 8 || {{cellcolors|#11bbee}} NRCS ? || Non Rush Current on Start-up ? || Capacitor? to ground
|-
|-
| 8 || ? || diode ? to ground
| 9 || {{cellcolors|#000000|#aaaaaa}} GND || Ground ||  
|-
|-
| 9 || GROUND ||  
| 10 || {{cellcolors|#000000|#aaaaaa}} GND || Ground ||  
|-
|-
| 10 || GROUND ||
| 11 || {{cellcolors|#ff0000}} VCC ? || Power supply ? || To fuse/thermistor [[Talk:Protection | TH7601]]
|-{{cellcolors|red}}
| 11 || V_IN_1 <!-- not official name --> || connected to BD9684 pins 3,8,17
|-
|-
| 12 || ? || 42k ohm resistor to ground, and to a sinkhole that dissapears in the other side and emerges near syscon, connected to SWx-x pin 92
| 12 || {{cellcolors|#33cc33|#ffffff}} EN ? || Enable input ? || dissapears in a sinkhole (resistor 23Kohm to ground in the other side) and emerges near syscon, connected to pin95@[[SW2-303]]
|-
| 13 || {{cellcolors|#11bbee}} SCP ? || Short Circuit Protection delay  time  setting ? || dissapears in a sinkhole (capacitor 915nf to ground in the other side)
|-
| 14 || {{cellcolors|#ff8822}} VD ? || Input voltage detect ? || Shorten with IN pins
|-
| 15 || rowspan="6" {{cellcolors|#ff8822}} IN ? || rowspan="6" |  Input voltage ? || rowspan="6" |  to 3 sinkholes missing at the other side, to 4 sinkholes connected to BD3525 pins 14 up to 20... and to ???
|-
|-
| 13 || ? || 1000nf capacitor to ground
|-{{cellcolors|orange}}
| 14 || rowspan="7" | V_IN_2 <!-- not official name --> || rowspan="7" | capacitor to ground, to 4 sinkholes missing in the other side, connected to BD3525 pins 14 up to 20
|-{{cellcolors|orange}}
| 15
|-{{cellcolors|orange}}
| 16
| 16
|-{{cellcolors|orange}}
|-
| 17
| 17
|-{{cellcolors|orange}}
|-
| 18
| 18
|-{{cellcolors|orange}}
|-
| 19
| 19
|-{{cellcolors|orange}}
|-
| 20
| 20
|-
|}
|}


==== BD9684 0906 ====
{| class="wikitable"
 
|+BD3527 (near USB) pinout
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
! Pin # !! Name !! Description !! Connections
|- bgcolor="#cccccc"
|-
! Pin !! Signal !! Description
| 1 || rowspan="5" {{cellcolors|#ffcc22}} OUT ? || rowspan="5" | Output voltage ? || rowspan="5" | 88 ohm resistor to ground, to a testpoint, to 4 sinkholes and to the other side to electrolitic capacitor 2.5v 330 ('''very close to a ram chip''')
|-
| 2
|-
|-
| 1 || ? || sealed coil... then to 8 sinkholes... to BD controller, etc...
| 3
|-
|-
| 2 || ? || dissapears under package
| 4
|-{{cellcolors|red}}
| 3 || V_? <!-- not official name --> || <!-- connected to the common rail with the previous ones --> 0.400mf capacitor to ground... then to 4 sinkholes... at the other side conneced to fuse/thermistor TH7601
|-
|-
| 4 || ? || to a sinkhole... at the other side 3.3K resistor to ground, then connected to pins 2 and 3 of a dual transistor (base of TR1, and collector of TR2)
| 5
|-
|-
| 5 || GROUND ||
| 6 || {{cellcolors|#ffcc22}} VOS ? || Output voltage control ? || Shorten with OUT pins
|-
|-
| 6 || GROUND ||  
| 7 || {{cellcolors|#ffcc22|#ff0000}} FB ? || Reference voltage feedback ? || capacitor and 1600 ohm resistor to OUT pins
|-
|-
| 7 || || dissapears under package
| 8 || {{cellcolors|#11bbee}} NRCS ? || Non Rush Current on Start-up ? || Capacitor? to ground
|-{{cellcolors|red}}
| 8 || V_? <!-- not official name --> || 0.400mf capacitor to ground... then to the same 4 sinkholes of pin 3
|-
|-
| 9 || ? || dissapears under package
| 9 || {{cellcolors|#000000|#aaaaaa}} GND || Ground ||  
|-
|-
| 10 || ? || sealed coil... then tied to pin 11
| 10 || {{cellcolors|#000000|#aaaaaa}} GND || Ground ||  
|-
|-
| 11 || ? || to 6 sinkholes... at the other side to unpopulated service connector... etc...
| 11 || {{cellcolors|#ff0000}} VCC ? || Power supply ? || To fuse/thermistor [[Talk:Protection | TH7601]]
|-
|-
| 12 || ? || tied to pin 13... capacitor to ground, to a 4x-sinkhole... then to BD controller
| 12 || {{cellcolors|#33cc33|#ffffff}} EN ? || Enable input ? || 42k ohm resistor to ground, and to a sinkhole that dissapears in the other side and emerges near syscon, connected to pin92@[[SW2-303]]
|-
|-
| 13 || ? || tied to pin 12... capacitor to ground, to a 4x-sinkhole... then to BD controller
| 13 || {{cellcolors|#11bbee}} SCP ? || Short Circuit Protection delay  time  setting ? || 1000nf capacitor to ground
|-
|-
| 14 || GROUND ||  
| 14 || {{cellcolors|#ff8822}} VD ? || Input voltage detect ? || Shorten with IN pins
|-
|-
| 15 || ? || to a sinkhole... at the other side to BD controller
| 15 || rowspan="6" {{cellcolors|#ff8822}} IN ? || rowspan="6" |  Input voltage ? || rowspan="6" |  capacitor to ground, to 4 sinkholes missing in the other side, connected to BD3525 pins 14 up to 20 ... and to ???
|-
|-
| 16 || ? || dissapears under package
| 16
|-{{cellcolors|red}}
| 17 || V_? <!-- not official name --> || 0.400mf capacitor to ground... then to a sinkhole and tied to pin 3
|-
|-
| 18 || ? || towards blu ray laser connector
| 17
|-
|-
| 19 || ? || tied to pin 1
| 18
|-
|-
| 20 || ? || to a sinkhole... then to pin 6 of the same dual transistor (collector of TR1)
| 19
|-
|-
| 20
|}
|}


*pin 5 of the dual transistor (base of TR2) is connected to a long trace that dies in a sinkhole and emerges under syscon, connected to SWx-x pin 42
== Others ==
*the emitter pins of the dual transistor (1 and 4) are connected to a common ground
*RSX VDDR control in DIA-001 ---> Rohm D35231 (1,2v)?, see [https://www.psx-place.com/threads/fault-finding-ylod-with-the-syscon-first-steps-and-error-reporting.30100/page-134#post-327399 1]
*RSX VDDR control in DIA-002 ---> Rohm D35230 (1,0v)?, see [https://www.psx-place.com/threads/fault-finding-ylod-with-the-syscon-first-steps-and-error-reporting.30100/page-134#post-327399 1]

Latest revision as of 00:48, 15 June 2022

This article is marked for rewrite/restructuring in proper wiki format.
You can help PS3 Developer wiki by editing it.

JSD-001 motherboard[edit source]

All the components listed are controlled by Syscon and connected to it by a pin/trace either directlly or indirectlly, the traces are hidden in internal layers of the motherboard

By looking at the first syscon model used by the PS3 CXR713120-201GB where we know the names of the pin signals it seems these syscon control lines for voltage regulators could be the syscon pins named SW_x or SW_x_x (switches, used as a generic name for slave components that only has 2 states)

Mitsumi 463A (STBY)[edit source]

Mitsumi voltage regulator 463A
Seen on a JSD-001 motherboard
Pin # Name Description
1 5V_EVER Input 5v standby rail, from power supply (pin 1 of connector CN101)
2 3.3V_EVER_B Output 3.3v standby rail 2
3 RST/SYSCON_RST Goes under package to the black 100 ohm resistor at its right, and from there to syscon pin26@SW2-303
4 ? Goes under package to squared testpad/sinkhole at its right (not connected ?)
5 VCAP Capacitor to ground
6 ? To squared testpad/sinkhole at its top (not connected ?)
7 GND Ground
8 3.3V_EVER_A Output 3.3v standby rail 1

Mitsumi 348A (HDMI)[edit source]

Mitsumi voltage regulator 348A
Seen on a JSD-001 motherboard
Pin # Name Description
1 N/C Not connected
2 HDMI_EN Connected to SW2-30x pin 119
Connected to HDMI connector pin 18 (+5V output) through a transistor
3 GND Ground (this pin also dissipates heat to the circuit board ground layer)
4 HDMI_VCC1 / +5V_ANA ? Connected to HDMI controller MN8647091 pin 100 (and a lot more pins). It have a testpad at the other board side
5 HDMI_VCC2 / +3.3V_ANA ? Connected to HDMI controller MN8647091 pin 25 (and a lot more pins). It have a testpad at the other board side
6 GND Ground (this pin also dissipates heat to the circuit board ground layer)
7 HDMI_EN Connected to SW2-30x pin 119
Connected to HDMI connector pin 18 (+5V output) through a transistor
8 5V_EVER Connected to Power Supply control connector (CN101) pin 1

Mitsumi 810X (RSX RAM)[edit source]

Mitsumi voltage regulator 810x
Pin # Name Description
1 RSX_VDDR connected to a lot of pads of the RSX, it has a testpad at the other board side
2 N/C Not connected
3 GND Ground
4 NOISE_CAP Noise decrease pin. 0.01μF capacitor to GND, and to a tiny squared testpad
5 EN ?/Cont/Control Connected to syscon pin75@SW2-303
6 N/C Not connected
7 N/C Not connected
8 VIN connected to 2x sinkholes

D35653 0S25[edit source]

Next to NOR, on top of the board JSD-001, responsible of the NOR VCC

Pin # Name Description
1 OUT/NOR ? capacitor and 180 ohm resistor to ground... then to 4 sinkholes and at the other side NOR VCC 3.3v (testpoint)
2 GND
3 GND
4 ? Capacitor to ground
5 EN ? Connected to pin50@SW2-303. And pin 3 @ Service Connector
6 GND
7 GND
8 VCC ? To fuse/thermistor TH7601

BD9684 0906[edit source]

Pin # Name Description
1 ? sealed coil... then to 8 sinkholes... to BD controller, etc...
2 ? dissapears under package
3 VCC ? 0.400mf capacitor to ground, and to fuse/thermistor TH7601
4 EN ? to a sinkhole... at the other side 3.3K resistor to ground, then connected to pins 2 and 3 of a dual transistor (base of TR1, and collector of TR2)
pin 5 of the dual transistor (base of TR2) is connected to a long trace that dies in a sinkhole and emerges under syscon, connected to pin42@SW2-303
the emitter pins of the dual transistor (1 and 4) are connected to a common ground
5 GND
6 GND
7 dissapears under package
8 VCC ? 0.400mf capacitor to ground, and to fuse/thermistor TH7601
9 ? dissapears under package
10 ? sealed coil... then tied to pin 11
11 ? to 6 sinkholes... at the other side to unpopulated service connector... etc...
12 ? Capacitor to ground, to a 4x-sinkhole... then to BD controller
13
14 GND
15 ? to a sinkhole... at the other side to BD controller
16 ? dissapears under package
17 VCC ? 0.400mf capacitor to ground, and to fuse/thermistor TH7601
18 ? towards blu ray laser connector
19 ? tied to pin 1
20 ? to a sinkhole... then to pin 6 of the same dual transistor (collector of TR1)

Rohm BD3525[edit source]

BD3525 pinout
Pin # Name Description Connections
1 OUT Output voltage To 4 sinkholes... at the other side to electrolitic capacitor 2.5v 330... and to ???
2
3
4
5
6 VOS Output voltage control Shorten with OUT pins
7 FB Reference voltage feedback Diode to ground, and capacitor to ground, and diode to 55.8 ohm resistor to OUT pins
8 NRCS Non Rush Current on Start-up Capacitor to ground
9 GND Ground
10 GND Ground
11 VCC Power supply To fuse/thermistor TH7601
12 EN Enable input 46Kohm resistor to ground, and a trace that dissapears in a sinkhole and emerges near syscon, connected to pin52@SW2-303
13 SCP Short Circuit Protection delay time setting Capacitor to ground
14 VD Input voltage detect Shorten with IN pins
15 IN Input voltage 0.400mf capacitor to ground, to 4 sinkholes connected to BD3527 (near usb) pins 14 up to 20 and BD3527 (near flash) pins 14 up to 20... and to ???
16
17
18
19
20

Rohm BD3527[edit source]

There are 2 BD3527 on JSD-001 motherboard, one is located near flash and the other near usb connectors


BD3527 (near flash) pinout
Pin # Name Description Connections
1 OUT ? Output voltage ? to 3 smd components to gnd, to electrolitic capacitor 2.5v 330, to 3 sinkholes with a testpoint at the other side
2
3
4
5
6 VOS ? Output voltage control ? Shorten with OUT pins
7 FB ? Reference voltage feedback ? Capacitor and 1600 ohm resistor to OUT pins
8 NRCS ? Non Rush Current on Start-up ? Capacitor? to ground
9 GND Ground
10 GND Ground
11 VCC ? Power supply ? To fuse/thermistor TH7601
12 EN ? Enable input ? dissapears in a sinkhole (resistor 23Kohm to ground in the other side) and emerges near syscon, connected to pin95@SW2-303
13 SCP ? Short Circuit Protection delay time setting ? dissapears in a sinkhole (capacitor 915nf to ground in the other side)
14 VD ? Input voltage detect ? Shorten with IN pins
15 IN ? Input voltage ? to 3 sinkholes missing at the other side, to 4 sinkholes connected to BD3525 pins 14 up to 20... and to ???
16
17
18
19
20
BD3527 (near USB) pinout
Pin # Name Description Connections
1 OUT ? Output voltage ? 88 ohm resistor to ground, to a testpoint, to 4 sinkholes and to the other side to electrolitic capacitor 2.5v 330 (very close to a ram chip)
2
3
4
5
6 VOS ? Output voltage control ? Shorten with OUT pins
7 FB ? Reference voltage feedback ? capacitor and 1600 ohm resistor to OUT pins
8 NRCS ? Non Rush Current on Start-up ? Capacitor? to ground
9 GND Ground
10 GND Ground
11 VCC ? Power supply ? To fuse/thermistor TH7601
12 EN ? Enable input ? 42k ohm resistor to ground, and to a sinkhole that dissapears in the other side and emerges near syscon, connected to pin92@SW2-303
13 SCP ? Short Circuit Protection delay time setting ? 1000nf capacitor to ground
14 VD ? Input voltage detect ? Shorten with IN pins
15 IN ? Input voltage ? capacitor to ground, to 4 sinkholes missing in the other side, connected to BD3525 pins 14 up to 20 ... and to ???
16
17
18
19
20

Others[edit source]

  • RSX VDDR control in DIA-001 ---> Rohm D35231 (1,2v)?, see 1
  • RSX VDDR control in DIA-002 ---> Rohm D35230 (1,0v)?, see 1
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Talk:Regulators&oldid=67134"