Sony Refurbishment: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
(add H00 40nm)
Line 42: Line 42:
Sony Serviced DIA-001 Cell Brace.jpg|Brace added underneath [[CELL BE]]
Sony Serviced DIA-001 Cell Brace.jpg|Brace added underneath [[CELL BE]]
Sony Serviced DIA-001 (CECHQ) 40nm RSX.jpg|"40" sticker indicating a 40nm [[RSX]]
Sony Serviced DIA-001 (CECHQ) 40nm RSX.jpg|"40" sticker indicating a 40nm [[RSX]]
Sony Serviced DIA-001 (CECHH) 40nm top 2011-02.jpg|DIA-001 (CECHH00) board that had a Sony Refurbishment. Servicing dated 2011-02. The RSX has been replaced with a 40nm one.
Sony Serviced DIA-001 (CECHQ) top 2011-10 2010-8.jpg|DIA-001 (CECHQ00) board that had a Sony Refurbishment. Servicing dated 2011-10, but also serviced in 2010-8 too. The RSX has been replaced with a 40nm one.
Sony Serviced DIA-001 (CECHQ) top 2011-10 2010-8.jpg|DIA-001 (CECHQ00) board that had a Sony Refurbishment. Servicing dated 2011-10, but also serviced in 2010-8 too. The RSX has been replaced with a 40nm one.
Sony Serviced DIA-001 (CECHQ) bottom 2011-10 2010-8.jpg|DIA-001 (CECHQ00) board that had a Sony Refurbishment. Servicing dated 2011-10, but also serviced in 2010-8 too. The RSX has been replaced with a 40nm one.
Sony Serviced DIA-001 (CECHQ) bottom 2011-10 2010-8.jpg|DIA-001 (CECHQ00) board that had a Sony Refurbishment. Servicing dated 2011-10, but also serviced in 2010-8 too. The RSX has been replaced with a 40nm one.

Revision as of 15:01, 16 March 2025

Description

This page is intended to document the actions taken by Sony when they perform official repairs to PS3 consoles.

General

  • Stickers added to the board (servicing date, RSX size)
  • OEM stickers are replaced; for regions that have dates/datecodes on them, they are sometimes updated
    • For slim and super slim models, an official "PlayStation refurbished" or "Factory recertified" sticker is also applied

SKU Models

Fat/Phat

General

  • RSX replaced with a newer revision. If the new RSX is a smaller revision:
    • The voltage regulator is modified as the RSX requires less power
    • The Syscon chip is replaced (with different programming) so that the PS3 can accept the smaller RSX
      • Syscon firmware version will be updated: F29 for 65nm RSX, or F38 for 40nm RSX
      • This has the side effect of resetting the CELL BE run time counter to zero, and clearing the Error Log

COK-00x

The following are sometimes performed:

  • BD-400 replaced with BD-410
  • Felt added to Blu-ray entrance interior
  • Grey felt strip added underneath BD-410, smaller grey fabric removed
  • CELL BE brace added

DIA-00x

The following are sometimes performed:

Slim

Super slim

Non-Retail

see DECR Series

Gallery