Template:Syscon pinout LQFP 100 pins: Difference between revisions
Jump to navigation
Jump to search
(Kudos to mr. coxonudo for the decryption of vyktor SB pad reports, but one of the conversions was wrong, all other SB pad conversions are fine, i just reviewed the flipped images ;) |
Aomsin2526 (talk | contribs) (20Mhz is correct, just tested it. It affects pitch of beep sounds. and if not correct, uart won't work.) |
||
(14 intermediate revisions by one other user not shown) | |||
Line 1: | Line 1: | ||
<br style="clear: both;" /> | <includeonly><br style="clear: both;" /> | ||
<span style="font-size:175%; font-family:Times New Roman;">Pinout</span> | <span style="font-size:175%; font-family:Times New Roman;">Pinout</span> | ||
---- | ---- | ||
<div style="float:right">[[File:Syscon pinout LQFP 100 pins.png|300px|thumbnail|right|Syscon pinout LQFP 100 pins<br>NEC/Renesas 78K0R/KG3 Optional pin configurations]]<br>[[File:SW3-304 on PQX-001.jpg|300px|thumbnail|right|Syscon [[SW3-304]]<br>[[CECH-42xx]] with [[PQX-001]] motherboard]]</div> | </includeonly><div style="float:right">[[File:Syscon pinout LQFP 100 pins.png|300px|thumbnail|right|Syscon pinout LQFP 100 pins<br>NEC/Renesas 78K0R/KG3 Optional pin configurations]]<br>[[File:SW3-304 on PQX-001.jpg|300px|thumbnail|right|Syscon [[SW3-304]]<br>[[CECH-42xx]] with [[PQX-001]] motherboard]]</div> | ||
<div style="overflow:auto; <includeonly>height:800px;</includeonly>"> | <div style="overflow:auto; <includeonly>height:800px;</includeonly>"> | ||
{|class="wikitable sortable" style="width:100%; line-height:1em; font-size:0.9em" | |||
{|class="wikitable sortable" style="width:100%; line-height: | |+{{captionlinks|Syscon pinout LQFP 100 pins}} | ||
|+ {{captionlinks|Syscon pinout LQFP 100 pins}} | ! Pin !! style="padding:1px" | Port !! colspan="2" | Name !! style="padding:1px" | Type !! Description !! colspan="2" | Voltages | ||
! | |||
|- | |- | ||
! | ! style="border-top:hidden; background-position:50%" | !! style="border-top:hidden; background-position:50%" | !! style="padding-right:0px" | <abbr title="NEC/Renesas optional pin configuration">NEC/Renesas</abbr> !! style="padding-right:0px" | Sony/Custom !! style="border-top:hidden; background-position:50%" | !! style="border-top:hidden; background-position:50%" | !! class="unsortable" style="padding:1px" | <abbr title="Standby">Stby</abbr> !! class="unsortable" style="padding:1px" | <abbr title="Running">Runn</abbr> | ||
|- | |- | ||
| 1 || 14 || {{cellcolors|#77f|#ff0}} SCL20 || HDMI_I2C_SCL || {{pino}} || Connected to [[HDMI]] controller [[MN8647091]] pin 27 || 0 || 3.3V | | 1 || 14 || {{cellcolors|#77f|#ff0}} SCL20 || HDMI_I2C_SCL || {{pino}} || Connected to [[HDMI]] controller [[MN8647091]] pin 27 || 0 || 3.3V | ||
|- | |- | ||
| 2 || 14 || P141/PCLBUZ1/INTP7 || || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad AA17 (SB_RESET ?, or SB_CGRST ?) || || | | 2 || 14 || {{cellcolors|#33f|#e77}} P141/PCLBUZ1/INTP7 || || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad AA17 (SB_RESET ?, or SB_CGRST ?) || || | ||
|- | |- | ||
| 3 || 14 || INTP6 || SB_INT || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad W22 || || 3.3V | | 3 || 14 || {{cellcolors|#33f|#e77}} INTP6 || SB_INT || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad W22 || || 3.3V | ||
|- | |- | ||
| 4 || 12 || {{cellcolors|#f93}} EXLVI || || {{pini}} || Connected to [[Power Supply]] main +12V rail through a <abbr title="The resistor/s and divider are located very close (but not connected) to the 4-pins BD ribbon cable connector">resistor and divider</abbr>. Related with [[Syscon_Error_Codes|Error Code 3001 ?]] || || 1.5V | | 4 || 12 || {{cellcolors|#f93}} EXLVI || || {{pini}} || Connected to [[Power Supply]] main +12V rail through a <abbr title="The resistor/s and divider are located very close (but not connected) to the 4-pins BD ribbon cable connector">resistor and divider</abbr>. Related with [[Syscon_Error_Codes|Error Code 3001 ?]] || || 1.5V | ||
Line 24: | Line 23: | ||
| 6 || 4 || {{cellcolors|#246|#fff}} TO05 || BUZZER || {{pino}} || Connected to Buzzer- through a NPN 50V@100mA transistor || || 3.3V | | 6 || 4 || {{cellcolors|#246|#fff}} TO05 || BUZZER || {{pino}} || Connected to Buzzer- through a NPN 50V@100mA transistor || || 3.3V | ||
|- | |- | ||
| 7 || 4 || P45/SO01 || || ? || Connected to bdrom IC pin 11 ([[Bluray Drive]] controller [[CXD5132R-1]] ? <abbr title="R8J32840FP1 in CECH-42xx, or R9J04G011FP1 in CECH-43xx">or...</abbr>) || || 3.3V | | 7 || 4 || P45/SO01 || || ? || Connected to bdrom IC <strike>pin 11</strike> pin 7 ? ([[Bluray Drive]] controller [[CXD5132R-1]] ? <abbr title="R8J32840FP1 in CECH-42xx, or R9J04G011FP1 in CECH-43xx">or...</abbr>) || || 3.3V | ||
|- | |- | ||
| 8 || 4 || {{cellcolors|#77f|#ff0}} P44/SI01 || THR_I2C_SDA || {{pinio}} || Connected to [[Thermal#Temperature_Monitors|TMP411A]] pin 7 through a 47ohm resistor (CELL Temperature Monitor, data)<br>Connected to [[Thermal#Temperature_Monitors|TMP411B]] pin 7 through a 47ohm resistor (RSX Temperature Monitor, data)<br>Connected to [[ISL6331]] pin 22 (Unknown Temperature sensor, data). And a testpad || 3.3V || 3.3V | | 8 || 4 || {{cellcolors|#77f|#ff0}} P44/SI01 || THR_I2C_SDA || {{pinio}} || Connected to [[Thermal#Temperature_Monitors|TMP411A]] pin 7 through a 47ohm resistor (CELL Temperature Monitor, data)<br>Connected to [[Thermal#Temperature_Monitors|TMP411B]] pin 7 through a 47ohm resistor (RSX Temperature Monitor, data)<br>Connected to [[ISL6331]] pin 22 (Unknown Temperature sensor, data). And a testpad || 3.3V || 3.3V | ||
Line 30: | Line 29: | ||
| 9 || 4 || {{cellcolors|#77f|#ff0}} P43/<span style="text-decoration: overline;">SCK01</span> || THR_I2C_SCL || {{pino}} || Connected to [[Thermal#Temperature_Monitors|TMP411A]] pin 8 (CELL Temperature Monitor, clock)<br>Connected to [[Thermal#Temperature_Monitors|TMP411B]] pin 8 (RSX Temperature Monitor, clock)<br>Connected to [[ISL6331]] pin 23 (Unknown Temperature sensor, clock). And a testpad || 3.3V || 3.3V | | 9 || 4 || {{cellcolors|#77f|#ff0}} P43/<span style="text-decoration: overline;">SCK01</span> || THR_I2C_SCL || {{pino}} || Connected to [[Thermal#Temperature_Monitors|TMP411A]] pin 8 (CELL Temperature Monitor, clock)<br>Connected to [[Thermal#Temperature_Monitors|TMP411B]] pin 8 (RSX Temperature Monitor, clock)<br>Connected to [[ISL6331]] pin 23 (Unknown Temperature sensor, clock). And a testpad || 3.3V || 3.3V | ||
|- | |- | ||
| 10 || 4 || P42/TI04/TO04 || || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad AA18 (SB_RESET ?, or SB_CGRST ?) | | 10 || 4 || {{cellcolors|#33f|#e77}} P42/TI04/TO04 || || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad AA18 (SB_RESET ?, or SB_CGRST ?) | ||
|| || 3.3V | || || 3.3V | ||
|- | |- | ||
Line 45: | Line 44: | ||
| 16 || data-sort-value="17"| || {{cellcolors|#a74}} FLMD0 || FLASH_MODE || {{pini}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 8 (Flash programming mode) through a missing resistor || 3.3V || 3.3V | | 16 || data-sort-value="17"| || {{cellcolors|#a74}} FLMD0 || FLASH_MODE || {{pini}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 8 (Flash programming mode) through a missing resistor || 3.3V || 3.3V | ||
|- | |- | ||
| 17 || 12 || {{cellcolors|#555|#fff}} X2 || XTAL || {{pino}} || Connected to Crystal <abbr title=" | | 17 || 12 || {{cellcolors|#555|#fff}} X2 || XTAL || {{pino}} || Connected to Crystal <abbr title="20.000MHz">marked "ED" or "EU"</abbr> (Main system clock) || || | ||
|- | |- | ||
| 18 || 12 || {{cellcolors|#555|#fff}} X1 || EXTAL || {{pini}} || Connected to Crystal <abbr title=" | | 18 || 12 || {{cellcolors|#555|#fff}} X1 || EXTAL || {{pini}} || Connected to Crystal <abbr title="20.000MHz">marked "ED" or "EU"</abbr> (Main system clock) || || | ||
|- | |- | ||
| 19 || data-sort-value="18"| || {{cellcolors|#f93}} REGC || VDDbat || {{pin}} || Connected to <abbr title="Button cell, lithium, 20mm diameter, 2.5mm height, 3v 170mAh">CR2025 battery +</abbr> through 2 inverted Schottky 30V@30mA diodes ?<br>1uF capacitor to ground ? || || 2.5V | | 19 || data-sort-value="18"| || {{cellcolors|#f93}} REGC || VDDbat || {{pin}} || Connected to <abbr title="Button cell, lithium, 20mm diameter, 2.5mm height, 3v 170mAh">CR2025 battery +</abbr> through 2 inverted Schottky 30V@30mA diodes ?<br>1uF capacitor to ground ? || || 2.5V | ||
Line 63: | Line 62: | ||
| 25 || 6 || P61/SDA0 || || ? || || || | | 25 || 6 || P61/SDA0 || || ? || || || | ||
|- | |- | ||
! style="padding:0px" data-sort-value="25.5"| || style="padding:0px" data-sort-value="0.5"| || style="padding:0px" colspan="6" | | ! style="padding:0px" data-sort-value="25.5"| || style="padding:0px" data-sort-value="0.5"| || style="padding:0px" data-sort-value="ZZZZ" colspan="6" | | ||
|- | |- | ||
! style="padding:0px" data-sort-value="25.5"| || style="padding:0px" data-sort-value="1.5"| || style="padding:0px" colspan="6" | | ! style="padding:0px" data-sort-value="25.5"| || style="padding:0px" data-sort-value="1.5"| || style="padding:0px" data-sort-value="ZZZZ" colspan="6" | | ||
|- | |- | ||
! style="padding:0px" data-sort-value="25.5"| || style="padding:0px" data-sort-value="2.5"| || style="padding:0px" colspan="6" | | ! style="padding:0px" data-sort-value="25.5"| || style="padding:0px" data-sort-value="2.5"| || style="padding:0px" data-sort-value="ZZZZ" colspan="6" | | ||
|- | |- | ||
! style="padding:0px" data-sort-value="25.5"| || style="padding:0px" data-sort-value="3.5"| || style="padding:0px" colspan="6" | | ! style="padding:0px" data-sort-value="25.5"| || style="padding:0px" data-sort-value="3.5"| || style="padding:0px" data-sort-value="ZZZZ" colspan="6" | | ||
|- | |- | ||
! style="padding:0px" data-sort-value="25.5"| || style="padding:0px" data-sort-value="4.5"| || style="padding:0px" colspan="6" | | ! style="padding:0px" data-sort-value="25.5"| || style="padding:0px" data-sort-value="4.5"| || style="padding:0px" data-sort-value="ZZZZ" colspan="6" | | ||
|- | |- | ||
| 26 || 6 || P62 || || ? || Connected to <abbr title="64 pins">ISL IC</abbr> pin 3 || || 2.5V | | 26 || 6 || P62 || || ? || Connected to <abbr title="64 pins">ISL IC</abbr> pin 3 || || 2.5V | ||
Line 97: | Line 96: | ||
|| || 3.3V | || || 3.3V | ||
|- | |- | ||
| 35 || 7 || P75/KR5/INTP9 || || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad U19 throught 4k7 resistor | | 35 || 7 || {{cellcolors|#33f|#e77}} P75/KR5/INTP9 || || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad U19 throught 4k7 resistor | ||
|| || 3.3V | || || 3.3V | ||
|- | |- | ||
Line 124: | Line 123: | ||
|| || | || || | ||
|- | |- | ||
| 44 || 8 || P80 || || | | 44 || 8 || {{cellcolors|#ccc}} P80 || || {{pin}} || Connected to 3v3 through a 100K resistor, and to a <abbr title="Optionally, this pin can be pulled down to ground by a missing component">unpopulated pad</abbr> | ||
|| || | || || | ||
|- | |- | ||
| 45 || 8 || {{cellcolors|#ccc}} P81 || || {{pin}} || 0ohm resistor to | | 45 || 8 || {{cellcolors|#ccc}} P81 || || {{pin}} || Connected to GND through a 0ohm resistor, and to a <abbr title="Optionally, this pin can be pulled up to 3v3 by a missing component">unpopulated pad</abbr> | ||
|| | || | ||
|- | |- | ||
| 46 || 8 || P82 || || ? || Connected to [[HDMI]] controller [[MN8647091]] pin 95 | | 46 || 8 || P82 || || ? || Connected to [[HDMI]] controller [[MN8647091]] pin 95. <abbr title="???through 3.6K resistor???>Notes</abbr> | ||
|| || 3.3V | || || 3.3V | ||
|- | |- | ||
| 47 || 8 || {{cellcolors|#ccc}} P83 || || {{pin}} || 0ohm resistor to | | 47 || 8 || {{cellcolors|#ccc}} P83 || || {{pin}} || Connected to GND through a 0ohm resistor, and to a <abbr title="Optionally, this pin can be pulled up to 3v3 by a missing component">unpopulated pad</abbr> | ||
|| | || | ||
|- | |- | ||
Line 145: | Line 144: | ||
|| || 3.3V | || || 3.3V | ||
|- | |- | ||
! style="padding:0px" data-sort-value="50.5"| || style="padding:0px" data-sort-value="5.5"| || style="padding:0px" colspan="6" | | ! style="padding:0px" data-sort-value="50.5"| || style="padding:0px" data-sort-value="5.5"| || style="padding:0px" data-sort-value="ZZZZ" colspan="6" | | ||
|- | |- | ||
! style="padding:0px" data-sort-value="50.5"| || style="padding:0px" data-sort-value="6.5"| || style="padding:0px" colspan="6" | | ! style="padding:0px" data-sort-value="50.5"| || style="padding:0px" data-sort-value="6.5"| || style="padding:0px" data-sort-value="ZZZZ" colspan="6" | | ||
|- | |- | ||
! style="padding:0px" data-sort-value="50.5"| || style="padding:0px" data-sort-value="7.5"| || style="padding:0px" colspan="6" | | ! style="padding:0px" data-sort-value="50.5"| || style="padding:0px" data-sort-value="7.5"| || style="padding:0px" data-sort-value="ZZZZ" colspan="6" | | ||
|- | |- | ||
! style="padding:0px" data-sort-value="50.5"| || style="padding:0px" data-sort-value="10.5"| || style="padding:0px" colspan="6" | | ! style="padding:0px" data-sort-value="50.5"| || style="padding:0px" data-sort-value="10.5"| || style="padding:0px" data-sort-value="ZZZZ" colspan="6" | | ||
|- | |- | ||
! style="padding:0px" data-sort-value="50.5"| || style="padding:0px" data-sort-value="11.5"| || style="padding:0px" colspan="6" | | ! style="padding:0px" data-sort-value="50.5"| || style="padding:0px" data-sort-value="11.5"| || style="padding:0px" data-sort-value="ZZZZ" colspan="6" | | ||
|- | |- | ||
| 51 || 8 || P87 || || ? || Connected to power pcb connector | | 51 || 8 || P87 || || ? || Connected to power pcb connector | ||
Line 167: | Line 166: | ||
|| || 3.3V | || || 3.3V | ||
|- | |- | ||
| 55 || 5 || P51 || || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad W21. And in line 10k to gnd || || | | 55 || 5 || {{cellcolors|#33f|#e77}} P51 || || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad W21. And in line 10k to gnd || || | ||
|- | |- | ||
| 56 || 5 || {{cellcolors|#d9f|#fff}} P52 || | | 56 || 5 || {{cellcolors|#d9f|#fff}} P52 || || {{pini}} || 10k resistor to GND, and to wifi/BT module (BT_WAKEON/BT_WAKE ? (input)<strike>, BT_RESET ? (output), or WLAN_RESET/11G_RESET ? (output)</strike>)<br>See: [[Media:KTE-001_wifitraces.jpg|wifi/BT 10x7 pinout]] or [[Media:REX-001_wifitraces.jpg|wifi/BT 9x7 pinout]] || Vary || 3.3V | ||
|- | |- | ||
| 57 || 5 || {{cellcolors|#a74}} P53 || UART0_RxD || {{pini}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 11 (UART-TTL terminal Receive) through a missing resistor<br>Connected to [[PCI]] [[Media:PCI connector JSD-001 SB and SC UART.jpg|Connector]] pin 6 through a missing resistor || || | | 57 || 5 || {{cellcolors|#a74}} P53 || UART0_RxD || {{pini}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 11 (UART-TTL terminal Receive) through a missing resistor<br>Connected to [[PCI]] [[Media:PCI connector JSD-001 SB and SC UART.jpg|Connector]] pin 6 through a missing resistor || || | ||
Line 175: | Line 174: | ||
| 58 || 5 || {{cellcolors|#a74}} P54 || UART0_TxD || {{pino}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 10 (UART-TTL terminal Transmit) through a missing resistor<br>Connected to [[PCI]] [[Media:PCI connector JSD-001 SB and SC UART.jpg|Connector]] pin 4 through a missing resistor || Vary || 3.3V | | 58 || 5 || {{cellcolors|#a74}} P54 || UART0_TxD || {{pino}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 10 (UART-TTL terminal Transmit) through a missing resistor<br>Connected to [[PCI]] [[Media:PCI connector JSD-001 SB and SC UART.jpg|Connector]] pin 4 through a missing resistor || Vary || 3.3V | ||
|- | |- | ||
| 59 || 5 || P55 || || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad V19 || || 3.3V | | 59 || 5 || {{cellcolors|#33f|#fff}} P55 || || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad V19 (SB_SPI_CLK ?, SB_SPI_DI ?, SB_SPI_DO ?) || || 3.3V | ||
|- | |- | ||
| 60 || 5 || P56 || || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad V22. And in line 47ohms | | 60 || 5 || {{cellcolors|#33f|#fff}} P56 || || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad V22. And in line 47ohms (SB_SPI_CLK ?, SB_SPI_DI ?, SB_SPI_DO ?) || || 3.3V | ||
|- | |- | ||
| 61 || 5 || P57 || || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad U18 || || 3.3V | | 61 || 5 || {{cellcolors|#33f|#fff}} P57 || || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad U18 (SB_SPI_CLK ?, SB_SPI_DI ?, SB_SPI_DO ?) || || 3.3V | ||
|- | |- | ||
| 62 || 1 || {{cellcolors|#33f|#e77}} P17 || RSX_VINTE0<br>VD_VINT0 || {{pini}} || Connected to [[RSX]] pad AR22 ([[Template:RSX pad layout 41x41|41x41 layout]]), or pad <abbr title="Unknown>UNK</abbr> ([[Template:RSX_pad_layout_34x34|34x34 layout]]) through a 10k resistor || || 1.5V | | 62 || 1 || {{cellcolors|#33f|#e77}} P17 || RSX_VINTE0<br>VD_VINT0 || {{pini}} || Connected to [[RSX]] pad AR22 ([[Template:RSX pad layout 41x41|41x41 layout]]), or pad <abbr title="Unknown>UNK</abbr> ([[Template:RSX_pad_layout_34x34|34x34 layout]]) through a 10k resistor || || 1.5V | ||
Line 209: | Line 208: | ||
| 75 || 15 || {{cellcolors|#33f|#e77}} P157 || BE_POWGOOD<br>POWER_GOOD || {{pino}} || Connected to [[CELL BE|CELL]] pad <abbr title="Unknown>UNK</abbr> (1308 layout), or pad <abbr title="Unknown>UNK</abbr> (1359 layout)<br>Connected to [[CELL BE|CELL]] [[Service_Connectors#CN1001_.28CELL_BE_JTAG.29|Service Connector CN1001]] pad 9 || || 1.2V | | 75 || 15 || {{cellcolors|#33f|#e77}} P157 || BE_POWGOOD<br>POWER_GOOD || {{pino}} || Connected to [[CELL BE|CELL]] pad <abbr title="Unknown>UNK</abbr> (1308 layout), or pad <abbr title="Unknown>UNK</abbr> (1359 layout)<br>Connected to [[CELL BE|CELL]] [[Service_Connectors#CN1001_.28CELL_BE_JTAG.29|Service Connector CN1001]] pad 9 || || 1.2V | ||
|- | |- | ||
! style="padding:0px" data-sort-value="75.5"| || style="padding:0px" data-sort-value="12.5"| || style="padding:0px" colspan="6" | | ! style="padding:0px" data-sort-value="75.5"| || style="padding:0px" data-sort-value="12.5"| || style="padding:0px" data-sort-value="ZZZZ" colspan="6" | | ||
|- | |- | ||
! style="padding:0px" data-sort-value="75.5"| || style="padding:0px" data-sort-value="13.5"| || style="padding:0px" colspan="6" | | ! style="padding:0px" data-sort-value="75.5"| || style="padding:0px" data-sort-value="13.5"| || style="padding:0px" data-sort-value="ZZZZ" colspan="6" | | ||
|- | |- | ||
! style="padding:0px" data-sort-value="75.5"| || style="padding:0px" data-sort-value="14.5"| || style="padding:0px" colspan="6" | | ! style="padding:0px" data-sort-value="75.5"| || style="padding:0px" data-sort-value="14.5"| || style="padding:0px" data-sort-value="ZZZZ" colspan="6" | | ||
|- | |- | ||
! style="padding:0px" data-sort-value="75.5"| || style="padding:0px" data-sort-value="15.5"| || style="padding:0px" colspan="6" | | ! style="padding:0px" data-sort-value="75.5"| || style="padding:0px" data-sort-value="15.5"| || style="padding:0px" data-sort-value="ZZZZ" colspan="6" | | ||
|- | |- | ||
| 76 || 15 || {{cellcolors|#33f|#e77}} P156 || BE_RESET<br>BE_RESET_AND<br>HARD_RESET || {{pino}} || Connected to [[CELL BE|CELL]] pad <abbr title="Unknown>UNK</abbr> (1308 layout), or pad <abbr title="Unknown>UNK</abbr> (1359 layout)<br>Connected to [[CELL BE|CELL]] [[Service_Connectors#CN1001_.28CELL_BE_JTAG.29|Service Connector CN1001]] pad 6 and 8 || || 1.2V | | 76 || 15 || {{cellcolors|#33f|#e77}} P156 || BE_RESET<br>BE_RESET_AND<br>HARD_RESET || {{pino}} || Connected to [[CELL BE|CELL]] pad <abbr title="Unknown>UNK</abbr> (1308 layout), or pad <abbr title="Unknown>UNK</abbr> (1359 layout)<br>Connected to [[CELL BE|CELL]] [[Service_Connectors#CN1001_.28CELL_BE_JTAG.29|Service Connector CN1001]] pad 6 and 8 || || 1.2V | ||
Line 235: | Line 234: | ||
| 84 || 2 || P26/ANI6 || || ? || Connected to [[switch boards|Switch board]] eject switch ? (EJECT_SW?). And to a testpad || || | | 84 || 2 || P26/ANI6 || || ? || Connected to [[switch boards|Switch board]] eject switch ? (EJECT_SW?). And to a testpad || || | ||
|- | |- | ||
| 85 || 2 || {{cellcolors|#d9f|#fff}} P25/ANI5 || || | | 85 || 2 || {{cellcolors|#d9f|#fff}} P25/ANI5 || || {{pino}} || 10K resistor to GND, to testpad, and to 100ohms resistor to Wifi/BT module (<strike>BT_WAKEON/BT_WAKE ? (input)</strike>, BT_RESET ? (output), or WLAN_RESET/11G_RESET ? (output)). See: [[Media:KTE-001_wifitraces.jpg|wifi/BT 10x7 pinout]] or [[Media:REX-001_wifitraces.jpg|wifi/BT 9x7 pinout]] || || | ||
|- | |- | ||
| 86 || 2 || {{cellcolors|#d9f|#fff}} P24/ANI4 || || | | 86 || 2 || {{cellcolors|#d9f|#fff}} P24/ANI4 || || {{pino}} || 10K resistor to GND, to testpad, and to 100ohms resistor to Wifi/BT module (<strike>BT_WAKEON/BT_WAKE ? (input)</strike>, BT_RESET ? (output), or WLAN_RESET/11G_RESET ? (output)). See: [[Media:KTE-001_wifitraces.jpg|wifi/BT 10x7 pinout]] or [[Media:REX-001_wifitraces.jpg|wifi/BT 9x7 pinout]] || || | ||
|- | |- | ||
| 87 || 2 || P23/ANI3 || || ? || || || 3.3V | | 87 || 2 || P23/ANI3 || || ? || || || 3.3V |
Latest revision as of 06:07, 11 January 2024
Pin | Port | Name | Type | Description | Voltages | ||
---|---|---|---|---|---|---|---|
NEC/Renesas | Sony/Custom | Stby | Runn | ||||
1 | 14 | SCL20 | HDMI_I2C_SCL | Connected to HDMI controller MN8647091 pin 27 | 0 | 3.3V | |
2 | 14 | P141/PCLBUZ1/INTP7 | ? | Connected to South Bridge CXD9963GB pad AA17 (SB_RESET ?, or SB_CGRST ?) | |||
3 | 14 | INTP6 | SB_INT | ? | Connected to South Bridge CXD9963GB pad W22 | 3.3V | |
4 | 12 | EXLVI | Connected to Power Supply main +12V rail through a resistor and divider. Related with Error Code 3001 ? | 1.5V | |||
5 | 4 | P47/INTP2 | ? | Connected to HDMI controller MN8647091 pin 94 | |||
6 | 4 | TO05 | BUZZER | Connected to Buzzer- through a NPN 50V@100mA transistor | 3.3V | ||
7 | 4 | P45/SO01 | ? | Connected to bdrom IC |
3.3V | ||
8 | 4 | P44/SI01 | THR_I2C_SDA | Connected to TMP411A pin 7 through a 47ohm resistor (CELL Temperature Monitor, data) Connected to TMP411B pin 7 through a 47ohm resistor (RSX Temperature Monitor, data) Connected to ISL6331 pin 22 (Unknown Temperature sensor, data). And a testpad |
3.3V | 3.3V | |
9 | 4 | P43/SCK01 | THR_I2C_SCL | Connected to TMP411A pin 8 (CELL Temperature Monitor, clock) Connected to TMP411B pin 8 (RSX Temperature Monitor, clock) Connected to ISL6331 pin 23 (Unknown Temperature sensor, clock). And a testpad |
3.3V | 3.3V | |
10 | 4 | P42/TI04/TO04 | ? | Connected to South Bridge CXD9963GB pad AA18 (SB_RESET ?, or SB_CGRST ?) | 3.3V | ||
11 | 4 | TOOL1 | TOOL_CLK | Connected to Service Connector 3rd Gen. pin 13 (Tool clock) through a missing resistor | 3.3V | ||
12 | 4 | TOOL0 | TOOL_DAT | Connected to Service Connector 3rd Gen. pin 7 (Tool Data) through a missing resistor | 3.3V | ||
13 | RESET | RST | Connected to Service Connector 3rd Gen. pin 9 through a missing resistor | 3.3V | |||
14 | 12 | XT2 | OSCOUT | Connected to Crystal 32.768kHz (Subsystem clock) | 1.2V | 1.2V | |
15 | 12 | XT1 | OSCIN | Connected to Crystal 32.768kHz (Subsystem clock) | 0.8V | ||
16 | FLMD0 | FLASH_MODE | Connected to Service Connector 3rd Gen. pin 8 (Flash programming mode) through a missing resistor | 3.3V | 3.3V | ||
17 | 12 | X2 | XTAL | Connected to Crystal marked "ED" or "EU" (Main system clock) | |||
18 | 12 | X1 | EXTAL | Connected to Crystal marked "ED" or "EU" (Main system clock) | |||
19 | REGC | VDDbat | Connected to CR2025 battery + through 2 inverted Schottky 30V@30mA diodes ? 1uF capacitor to ground ? |
2.5V | |||
20 | VSS | GND | |||||
21 | EVSS0 | GND | |||||
22 | VDD | 3.3_EVER_B | Connected to Mitsumi 463A pin 2 (standby voltage regulator, secondary output power rail) | 3.3V | 3.3V | ||
23 | EVDD0 | 3.3_EVER_B | Connected to Mitsumi 463A pin 2 (standby voltage regulator, secondary output power rail) | 3.3V | 3.3V | ||
24 | 6 | P60/SCL0 | ? | ||||
25 | 6 | P61/SDA0 | ? | ||||
26 | 6 | P62 | ? | Connected to ISL IC pin 3 | 2.5V | ||
27 | 6 | P63 | ? | Connected to Switch board dual led (Red) through a dual digital NPN transistor EMH1(SOT-563) ? (STBY_LED ?) | 3.3V | ||
28 | 3 | P31/TI03/TO03/INTP4 | ACIN_DET ? | ? | pin 4 to wifi5v vreg ic/EN ? | ||
29 | 6 | P64 | ? | Connected (indirectly) to a voltage regulator ? (to enable something ?) | 3.3V | ||
30 | 6 | P65 | ? | Connected to IDT4227 pin 1 | 3.3V | ||
31 | 6 | P66 | MK_I2C_SCL ? | ? | Connected to Texas Instruments-SCEI Clock Generator CDC750 pin 33 | 3.3V | |
32 | 6 | P67 | MK_I2C_SDA ? | ? | Connected to Texas Instruments-SCEI Clock Generator CDC750 pin 34 | 3.3V | |
33 | 7 | P77/KR7/INTP11 | ? | Connected to voltage regulator Rohm BD3527 pin 12 (enable USB ?) | 3.3V | ||
34 | 7 | P76/KR6/INTP10 | ? | Connected to ISL6331 pin 24 | 3.3V | ||
35 | 7 | P75/KR5/INTP9 | ? | Connected to South Bridge CXD9963GB pad U19 throught 4k7 resistor | 3.3V | ||
36 | 7 | P74/KR4/INTP8 | ? | Connected to ISL6331 pin 20 | 3.3V | ||
37 | 7 | P73/KR3 | ? | Connected to Service Connector 3rd Gen. pin 3 Connected to D35236SK pin 6 |
3.3V | ||
38 | 7 | P72/KR2 | ? | Connected to D35326SK pin 7 | 3.3V | ||
39 | 7 | P71/KR1 | Connected to voltage regulator Rohm BD3525 pin 12 (enable something) | 3.3V | |||
40 | 7 | P70/KR0 | ? | Connected to Texas Instruments PS53123 pin 10 | 3.3V | ||
41 | 0 | P06 | ? | Connected to Texas Instruments PS53123 pin 7 | |||
42 | 0 | P05 | ? | Connected to Texas Instruments PS53123 pin 17 | 3.3V | ||
43 | EVSS1 | GND | |||||
44 | 8 | P80 | Connected to 3v3 through a 100K resistor, and to a unpopulated pad | ||||
45 | 8 | P81 | Connected to GND through a 0ohm resistor, and to a unpopulated pad | ||||
46 | 8 | P82 | ? | Connected to HDMI controller MN8647091 pin 95. Notes | 3.3V | ||
47 | 8 | P83 | Connected to GND through a 0ohm resistor, and to a unpopulated pad | ||||
48 | 8 | P84 | ? | Connected to pin1 EN vreg 8D11 (bottom side of power pcb) | 3.3V | ||
49 | 8 | P85 | ? | Connected to Texas Instruments PS53123 pin 3 | 3.3V | ||
50 | 8 | P86 | ? | Connected to IDT4227 pin 12 | 3.3V | ||
51 | 8 | P87 | ? | Connected to power pcb connector | 3.3V | ||
52 | 3 | P30/INTP3/RTC1HZ | ? | Connected to ISL6331 pin 21 | 3.3V | ||
53 | EVDD1 | 3.3_EVER_B | Connected to Mitsumi 463A pin 2 (standby voltage regulator, secondary output power rail) | 3.3V | 3.3V | ||
54 | 5 | P50 | ? | Connected to ISL6331 pin 25 | 3.3V | ||
55 | 5 | P51 | ? | Connected to South Bridge CXD9963GB pad W21. And in line 10k to gnd | |||
56 | 5 | P52 | 10k resistor to GND, and to wifi/BT module (BT_WAKEON/BT_WAKE ? (input) See: wifi/BT 10x7 pinout or wifi/BT 9x7 pinout |
Vary | 3.3V | ||
57 | 5 | P53 | UART0_RxD | Connected to Service Connector 3rd Gen. pin 11 (UART-TTL terminal Receive) through a missing resistor Connected to PCI Connector pin 6 through a missing resistor |
|||
58 | 5 | P54 | UART0_TxD | Connected to Service Connector 3rd Gen. pin 10 (UART-TTL terminal Transmit) through a missing resistor Connected to PCI Connector pin 4 through a missing resistor |
Vary | 3.3V | |
59 | 5 | P55 | ? | Connected to South Bridge CXD9963GB pad V19 (SB_SPI_CLK ?, SB_SPI_DI ?, SB_SPI_DO ?) | 3.3V | ||
60 | 5 | P56 | ? | Connected to South Bridge CXD9963GB pad V22. And in line 47ohms (SB_SPI_CLK ?, SB_SPI_DI ?, SB_SPI_DO ?) | 3.3V | ||
61 | 5 | P57 | ? | Connected to South Bridge CXD9963GB pad U18 (SB_SPI_CLK ?, SB_SPI_DI ?, SB_SPI_DO ?) | 3.3V | ||
62 | 1 | P17 | RSX_VINTE0 VD_VINT0 |
Connected to RSX pad AR22 (41x41 layout), or pad UNK (34x34 layout) through a 10k resistor | 1.5V | ||
63 | 1 | P16 | RSX_CGRST | This pin is "nerfed" with a 10k resistor to GND in RSX41x41 pad AV6 so syscon is not able to RESET the RSX CG |
0.8V | ||
64 | 1 | P15 | RSX_VINTE1 VD_VINT1 |
Connected to RSX pad AL38 (41x41 layout), or pad UNK (34x34 layout) | 1.5V | ||
65 | 1 | P14 | RSX_RESET | Connected to RSX pad AW5 (41x41 layout), or pad UNK (34x34 layout) | 1.5V | ||
66 | 1 | P13 | RSX_SPI_CS | Connected to RSX pad AW8 (41x41 layout), or pad UNK (34x34 layout) | 1.5V | ||
67 | 1 | SO00 | RSX_SPI_DO | Connected to RSX pad AY8 (41x41 layout), or pad UNK (34x34 layout) | 1.5V | ||
68 | 1 | SI00 | RSX_SPI_DI | Connected to RSX pad BA7 (41x41 layout), or pad UNK (34x34 layout) | |||
69 | 1 | SCK00 | RSX_SPI_CLK | Connected to RSX pad BA6 (41x41 layout), or pad UNK (34x34 layout) | |||
70 | AVREF1 | 1.5V | |||||
71 | 11 | P110/ANO0 | ? | Connected to a testpad near SC | |||
72 | 11 | P111/ANO1 | RSX_INT | Connected to RSX pad AY7 (41x41 layout), or pad UNK (34x34 layout). Related with Error Code 1802 | 1.5V | ||
73 | AVREF0 | 1.2V | |||||
74 | AVSS | GND | |||||
75 | 15 | P157 | BE_POWGOOD POWER_GOOD |
Connected to CELL pad UNK (1308 layout), or pad UNK (1359 layout) Connected to CELL Service Connector CN1001 pad 9 |
1.2V | ||
76 | 15 | P156 | BE_RESET BE_RESET_AND HARD_RESET |
Connected to CELL pad UNK (1308 layout), or pad UNK (1359 layout) Connected to CELL Service Connector CN1001 pad 6 and 8 |
1.2V | ||
77 | 15 | P155 | BE_SPI_DO | Connected to CELL pad UNK (1308 layout), or pad UNK (1359 layout). Serial Output from Syscon Master to Cell Slave | |||
78 | 15 | P154 | BE_SPI_DI | Connected to CELL pad UNK (1308 layout), or pad UNK (1359 layout). Serial Input from Cell Slave to Syscon Master | |||
79 | 15 | P153 | BE_SPI_CLK | Connected to CELL pad UNK (1308 layout), or pad UNK (1359 layout). 2.5 Mhz SPI Clock | 1.2V | ||
80 | 15 | P152 | BE_SPI_CS | Connected to CELL pad UNK (1308 layout), or pad UNK (1359 layout). Chip Select | Vary | 1.2V | |
81 | 15 | P151 | BE_INT ATTENTION |
Connected to CELL pad UNK (1308 layout), or pad UNK (1359 layout) through a NPN 50V@100mA transistor. Related with Error Code 1701 | |||
82 | 15 | P150 | SYS_THR_ALRT THERMAL_OVERLOAD |
Connected to CELL pad UNK (1308 layout), or pad UNK (1359 layout) through a NPN 50V@100mA transistor. Related with Error Code 1103 ?, or 1200 ? Connected to a testpad |
Vary | ||
83 | 2 | P27/ANI7 | ? | Connected to Switch board power switch ? (POW_SW?) | 3.3V | 3.3V | |
84 | 2 | P26/ANI6 | ? | Connected to Switch board eject switch ? (EJECT_SW?). And to a testpad | |||
85 | 2 | P25/ANI5 | 10K resistor to GND, to testpad, and to 100ohms resistor to Wifi/BT module ( |
||||
86 | 2 | P24/ANI4 | 10K resistor to GND, to testpad, and to 100ohms resistor to Wifi/BT module ( |
||||
87 | 2 | P23/ANI3 | ? | 3.3V | |||
88 | 2 | P22/ANI2 | ? | Connected to Bluray Drive 8-pins connector pin 8 through 100ohm resistor (DISC_CHUCK or DISC_OUT8_SW or DISC_OUT12_SW or |
|||
89 | 2 | P21/ANI1 | ? | Connected to Bluray Drive 8-pins connector pin 7 through 100ohm resistor (DISC_CHUCK or DISC_OUT8_SW or DISC_OUT12_SW or |
3.3V | ||
90 | 2 | P20/ANI0 | ? | Connected to Bluray Drive 8-pins connector pin 6 through 100ohm resistor (DISC_CHUCK or DISC_OUT8_SW or DISC_OUT12_SW or |
3.3V | 3.3V | |
91 | 13 | P130 | ACDC_STBY ? | Enable PSU 12v power rail ? | 3.3V | ||
92 | 13 | P131/TI06/TO06 | ? | Connected to voltage regulator Mitsumi 348A pins 2 and 7 ? Connected to HDMI connector pin 18 (+5V output) through a transistor ? |
3.3V | ||
93 | 0 | SCL10 | DVE_I2C_SCL | Connected to Digital Video Encoder CXM4027R pin 35 | 3.3V | ||
94 | 0 | SDA10 | DVE_I2C_SDA | Connected to Digital Video Encoder CXM4027R pin 36 | 3.3V | ||
95 | 0 | P02/SO10/TxD1 | ? | to pin 12 bdrom port ? (DISC_IN or DISC_PHOT_LED ?) | 3.3V | ||
96 | 0 | P01/TO00 | ? | Connected to HDMI controller MN8647091 pin 93 ??? | 1.5V | ||
97 | 0 | P00/TI00 | ? | ||||
98 | 14 | TO07 | FANPWM0 | Connected to the FAN grey wire (PWM duty) | 0.8V | ||
99 | 14 | P144/SO20/TxD2 | ? | to pin 17 on bdrom port ? (DISC_IN or DISC_PHOT_LED ?) | 3.3V | ||
100 | 14 | SDA20 | HDMI_I2C_SDA | Connected to HDMI controller MN8647091 pin 29 | 0 |