Template:Syscon pinout LQFP 100 pins: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 91: Line 91:
  ||  || 3.3V
  ||  || 3.3V
|-
|-
| 33 || 7 || P77/EX23/KR7/INTP11 ||  || ←I/O→ || connected to bd3527 pin12(usb side)
| 33 || 7 || P77/KR7/INTP11 ||  || ←I/O→ || connected to bd3527 pin12(usb side)
  ||  || 3.3V
  ||  || 3.3V
|-
|-
| 34 || 7 || P76/EX22/KR6/INTP10 ||  || ←I/O→ || connected to isl6331 pin24
| 34 || 7 || P76/KR6/INTP10 ||  || ←I/O→ || connected to isl6331 pin24
  ||  || 3.3V
  ||  || 3.3V
|-
|-
| 35 || 7 || P75/EX21/KR5/INTP9 ||  || ←I/O→ || Connected to [[South Bridge]] [[CXD9963GB]] pad U19 throught 4k7 resistor
| 35 || 7 || P75/KR5/INTP9 ||  || ←I/O→ || Connected to [[South Bridge]] [[CXD9963GB]] pad U19 throught 4k7 resistor
  ||  || 3.3V
  ||  || 3.3V
|-
|-
| 36 || 7 || P74/EX20/KR4/INTP8 ||  || ←I/O→ || 10K resistor to GND ? / connected to isl6331 pin20
| 36 || 7 || P74/KR4/INTP8 ||  || ←I/O→ || 10K resistor to GND ? / connected to isl6331 pin20
  ||  || 3.3V
  ||  || 3.3V
|-
|-
| 37 || 7 || P73/EX19/KR3 ||  || ←I/O→ || Connected to the service connector pin3 / pin 6 ic D35236SK
| 37 || 7 || P73/KR3 ||  || ←I/O→ || Connected to the service connector pin3 / pin 6 ic D35236SK
  ||  || 3.3V
  ||  || 3.3V
|-
|-
| 38 || 7 || P72/EX18/KR2 ||  || ←I/O→ || Connected to pin7 ic D35326SK
| 38 || 7 || P72/KR2 ||  || ←I/O→ || Connected to pin7 ic D35326SK
  ||  || 3.3V
  ||  || 3.3V
|-
|-
| 39 || 7 || P71/EX17/KR1 ||  || ←I/O→ || Connected to a voltage regulator ? (to enable something ?) / pin11 ic 35255 (top side test nor-pads)
| 39 || 7 || P71/KR1 ||  || ←I/O→ || Connected to a voltage regulator ? (to enable something ?) / pin11 ic 35255 (top side test nor-pads)
  ||  || 3.3V
  ||  || 3.3V
|-
|-
| 40 || 7 || P70/EX16/KR0 ||  || ←I/O→ || Connected to pin10 ic PS 53123
| 40 || 7 || P70/KR0 ||  || ←I/O→ || Connected to pin10 ic PS 53123
  ||  || 3.3V
  ||  || 3.3V
|-
|-
Line 124: Line 124:
  ||  ||  
  ||  ||  
|-
|-
| 44 || 8 || P80/EX0 ||  || ←I/O→ || pull up to 3v3
| 44 || 8 || P80 ||  || ←I/O→ || pull up to 3v3
  ||  ||  
  ||  ||  
|-
|-
| 45 || 8 || P81/EX1 ||  || ←I/O→ || 1 ohm resistor to ground / pull down to gnd 0 ohms
| 45 || 8 || P81 ||  || ←I/O→ || 1 ohm resistor to ground / pull down to gnd 0 ohms
  ||  
  ||  
|-
|-
| 46 || 8 || P82/EX2 ||  || ←I/O→ || pin 95 hdmi ic
| 46 || 8 || P82 ||  || ←I/O→ || pin 95 hdmi ic
  ||  || 3.3V
  ||  || 3.3V
|-
|-
| 47 || 8 || P83/EX3 ||  || ←I/O→ || 1 ohm resistor to ground / pull down to gnd 0 ohms
| 47 || 8 || P83 ||  || ←I/O→ || 1 ohm resistor to ground / pull down to gnd 0 ohms
||  
||  
|-
|-
| 48 || 8 || P84/EX4 ||  || ←I/O→ || Connected to pin1 EN vreg 8D11 (bottom side of power pcb)
| 48 || 8 || P84 ||  || ←I/O→ || Connected to pin1 EN vreg 8D11 (bottom side of power pcb)
  ||  || 3.3V
  ||  || 3.3V
|-
|-
| 49 || 8 || P85/EX5 ||  || ←I/O→ || Connected to pin3 ic PS 53123
| 49 || 8 || P85 ||  || ←I/O→ || Connected to pin3 ic PS 53123
  ||  || 3.3V
  ||  || 3.3V
|-
|-
| 50 || 8 || P86/EX6 ||  || ←I/O→ || Connected to ic idt4227 pin12
| 50 || 8 || P86 ||  || ←I/O→ || Connected to ic idt4227 pin12
  ||  || 3.3V
  ||  || 3.3V
|-
|-
Line 155: Line 155:
! style="padding:0px" data-sort-value="50.5"| || style="padding:0px" data-sort-value="11.5"| || style="padding:0px" colspan="6" |
! style="padding:0px" data-sort-value="50.5"| || style="padding:0px" data-sort-value="11.5"| || style="padding:0px" colspan="6" |
|-
|-
| 51 || 8 || P87/EX7 ||  || ←I/O→ || Connected to power pcb connector
| 51 || 8 || P87 ||  || ←I/O→ || Connected to power pcb connector
  ||  || 3.3V
  ||  || 3.3V
|-
|-
Line 164: Line 164:
  || 3.3V || 3.3V
  || 3.3V || 3.3V
|-
|-
| 54 || 5 || P50/EX8 ||  || ←I/O→ || Connected to isl6331 pin25
| 54 || 5 || P50 ||  || ←I/O→ || Connected to isl6331 pin25
  ||  || 3.3V
  ||  || 3.3V
|-
|-
| 55 || 5 || P51/EX9 ||  || ←I/O→ || Connected to [[South Bridge]] [[CXD9963GB]] pad W21. And in line 10k to gnd ||  ||  
| 55 || 5 || P51 ||  || ←I/O→ || Connected to [[South Bridge]] [[CXD9963GB]] pad W21. And in line 10k to gnd ||  ||  
|-
|-
| 56 || 5 || {{cellcolors|#d9f|#fff}} P52/EX10 || WIFI_CTRL || ←I/O→ || 10k resistor to GND, and to wifi/BT module. See: [[Media:KTE-001_wifitraces.jpg|wifi/BT 10x7 pinout]] or [[Media:REX-001_wifitraces.jpg|wifi/BT 9x7 pinout]] || Vary || 3.3V
| 56 || 5 || {{cellcolors|#d9f|#fff}} P52 || WIFI_CTRL || ←I/O→ || 10k resistor to GND, and to wifi/BT module. See: [[Media:KTE-001_wifitraces.jpg|wifi/BT 10x7 pinout]] or [[Media:REX-001_wifitraces.jpg|wifi/BT 9x7 pinout]] || Vary || 3.3V
|-
|-
| 57 || 5 || {{cellcolors|#a74}} P53 || UART0_RxD || {{pini}} || Syscon UART. Connected to service connector ? ||  ||  
| 57 || 5 || {{cellcolors|#a74}} P53 || UART0_RxD || {{pini}} || Syscon UART. Connected to service connector ? ||  ||  
Line 175: Line 175:
| 58 || 5 || {{cellcolors|#a74}} P54 || UART0_TxD || {{pino}} || Syscon UART. Connected to service connector ? || Vary || 3.3V
| 58 || 5 || {{cellcolors|#a74}} P54 || UART0_TxD || {{pino}} || Syscon UART. Connected to service connector ? || Vary || 3.3V
|-
|-
| 59 || 5 || P55/EX13 ||  || ←I/O→ || Connected to [[South Bridge]] [[CXD9963GB]] pad S19 ||  || 3.3V
| 59 || 5 || P55 ||  || ←I/O→ || Connected to [[South Bridge]] [[CXD9963GB]] pad S19 ||  || 3.3V
|-
|-
| 60 || 5 || P56/EX14 ||  || ←I/O→ || Connected to [[South Bridge]] [[CXD9963GB]] pad V22. And in line 47ohms (SB_INT?) ||  || 3.3V
| 60 || 5 || P56 ||  || ←I/O→ || Connected to [[South Bridge]] [[CXD9963GB]] pad V22. And in line 47ohms (SB_INT?) ||  || 3.3V
|-
|-
| 61 || 5 || P57/EX15 ||  || ←I/O→ || Connected to [[South Bridge]] [[CXD9963GB]] pad U18 ||  || 3.3V
| 61 || 5 || P57 ||  || ←I/O→ || Connected to [[South Bridge]] [[CXD9963GB]] pad U18 ||  || 3.3V
|-
|-
| 62 || 1 || {{cellcolors|#33f|#e77}} P17 || RSX_VINTE0/VD_VINT0 || {{pini}} || Connected to [[RSX]] pad AR22 ([[Template:RSX pad layout 41x41|RSX layout 41x41]]), or pad <abbr title="Unknown>UNK</abbr> ([[Template:RSX_pad_layout_34x34|RSX layout 34x34]]) through a 10k resistor ||  || 1.5V
| 62 || 1 || {{cellcolors|#33f|#e77}} P17 || RSX_VINTE0/VD_VINT0 || {{pini}} || Connected to [[RSX]] pad AR22 ([[Template:RSX pad layout 41x41|RSX layout 41x41]]), or pad <abbr title="Unknown>UNK</abbr> ([[Template:RSX_pad_layout_34x34|RSX layout 34x34]]) through a 10k resistor ||  || 1.5V

Revision as of 09:21, 5 June 2022


Pinout

Syscon pinout LQFP 100 pins
NEC/Renesas 78K0R/KG3 Optional pin configurations

Syscon SW3-304
CECH-42xx with PQX-001 motherboard
[ View ], [ Discuss ] or [ Edit ]
Syscon pinout LQFP 100 pins
[ View ], [ Discuss ] or [ Edit ]
Pin Port Name Type Description Voltages
NEC/Renesas Sony/Custom Stby Runn
1 14 SCL20 HDMI_I2C_SCL
Out
 Connected to HDMI controller MN8647091 pin 27 0 3.3V
2 14 P141/PCLBUZ1/INTP7 ←I/O→ Connected to South Bridge CXD9963GB pad AA17 (SB_RESET ?, or SB_CGRST ?)
3 14 P140/PCLBUZ0/INTP6 ←I/O→ Connected to South Bridge CXD9963GB pad W22 3.3V
4 12 P120/INTP0/EXLVI ←I/O→ External potential input for low-voltage detector ? 1.5V
5 4 P47/INTP2 ←I/O→ Connected to Wifi/BT module ??? (BT_WAKEON ? or BT_RESET ?)
6 4 TO05 BUZZER
Out
 Connected to the Buzzer through a transistor 3.3V
7 4 P45/SO01 ←I/O→ Connected to pin 11 bdrom IC 3.3V
8 4 P44/SI01 ←I/O→ Connected to pin 22 isl IC 3.3V 3.3V
9 4 P43/SCK01 ←I/O→ Connected to pin 23 isl IC 3.3V 3.3V
10 4 P42/TI04/TO04 ←I/O→ Connected to South Bridge CXD9963GB pad AA18 (SB_RESET ?, or SB_CGRST ?) 3.3V
11 4 TOOL1 TOOL_CLK ? Connected to Service Connector 3rd Gen. pin 13 (Tool clock) through a missing resistor ? 3.3V
12 4 TOOL0 TOOL_DAT
In/Out
 Connected to Service Connector 3rd Gen. pin 7 (Tool Data) through a missing resistor ? 3.3V
13 RESET RST
In
 3.3V
14 12 XT2 OSCOUT
Out
 Subsystem clock. Connected to a big black crystal. Amplitude (32.768Khz?) 1.2V 1.2V
15 12 XT1 OSCIN
In
 Subsystem clock. Connected to a big black crystal. Amplitude (32.768Khz?) 0.8V
16 FLMD0 FLASH_MODE
In
 3.3V 3.3V
17 12 X2 XTAL
Out
 Main system clock. Connected to a white ceramic crystal marked "ED" or "EU"
18 12 X1 EXTAL
In
 Main system clock. Connected to a white ceramic crystal marked "ED" or "EU"
19 REGC VREG_CAP
Others
 2.5V
20 VSS GND
Others
21 EVSS0 GND
Others
22 VDD 3.3_EVER_B
Others
 3.3V 3.3V
23 EVDD0 3.3_EVER_B
Others
 3.3V 3.3V
24 6 P60/SCL0 MK_I2C_SCL ? ←I/O→ Connected to Texas Instruments-SCEI Clock Generator CDC972 pin 37 ???
25 6 P61/SDA0 MK_I2C_SDA ? ←I/O→ Connected to Texas Instruments-SCEI Clock Generator CDC972 pin 38 ???
26 6 P62 ←I/O→ Connected to pin 3 isl ic 2.5V
27 6 P63 ←I/O→ 10K resistor to GND ? 3.3V
28 3 P31/TI03/TO03/INTP4 ACIN_DET ? ←I/O→ pin 4 to wifi5v vreg ic/EN ?
29 6 P64/RD ←I/O→ Connected (indirectly) to a voltage regulator ? (to enable something ?) 3.3V
30 6 P65/WR0 ←I/O→ Connected to the service connector ? / ic idt4227 pin1 3.3V
31 6 P66/WR1 ←I/O→ connected to cdc750 ic pin 33 3.3V
32 6 P67/ASTB ←I/O→ connected to cdc750 ic pin 34 3.3V
33 7 P77/KR7/INTP11 ←I/O→ connected to bd3527 pin12(usb side) 3.3V
34 7 P76/KR6/INTP10 ←I/O→ connected to isl6331 pin24 3.3V
35 7 P75/KR5/INTP9 ←I/O→ Connected to South Bridge CXD9963GB pad U19 throught 4k7 resistor 3.3V
36 7 P74/KR4/INTP8 ←I/O→ 10K resistor to GND ? / connected to isl6331 pin20 3.3V
37 7 P73/KR3 ←I/O→ Connected to the service connector pin3 / pin 6 ic D35236SK 3.3V
38 7 P72/KR2 ←I/O→ Connected to pin7 ic D35326SK 3.3V
39 7 P71/KR1 ←I/O→ Connected to a voltage regulator ? (to enable something ?) / pin11 ic 35255 (top side test nor-pads) 3.3V
40 7 P70/KR0 ←I/O→ Connected to pin10 ic PS 53123 3.3V
41 0 P06/WAIT ←I/O→ 45K resistor to GND ?/ Connected to pin7 ic PS 53123
42 0 P05/CLKOUT ←I/O→ 45K resistor to GND ? / Connected to pin17 ic PS 53123 3.3V
43 EVSS1 GND
Others
44 8 P80 ←I/O→ pull up to 3v3
45 8 P81 ←I/O→ 1 ohm resistor to ground / pull down to gnd 0 ohms
46 8 P82 ←I/O→ pin 95 hdmi ic 3.3V
47 8 P83 ←I/O→ 1 ohm resistor to ground / pull down to gnd 0 ohms
48 8 P84 ←I/O→ Connected to pin1 EN vreg 8D11 (bottom side of power pcb) 3.3V
49 8 P85 ←I/O→ Connected to pin3 ic PS 53123 3.3V
50 8 P86 ←I/O→ Connected to ic idt4227 pin12 3.3V
51 8 P87 ←I/O→ Connected to power pcb connector 3.3V
52 3 P30/INTP3/RTC1HZ ←I/O→ Connected to isl6331 pin21 3.3V
53 EVDD1 3.3_EVER_B
Others
 3.3V 3.3V
54 5 P50 ←I/O→ Connected to isl6331 pin25 3.3V
55 5 P51 ←I/O→ Connected to South Bridge CXD9963GB pad W21. And in line 10k to gnd
56 5 P52 WIFI_CTRL ←I/O→ 10k resistor to GND, and to wifi/BT module. See: wifi/BT 10x7 pinout or wifi/BT 9x7 pinout Vary 3.3V
57 5 P53 UART0_RxD
In
 Syscon UART. Connected to service connector ?
58 5 P54 UART0_TxD
Out
 Syscon UART. Connected to service connector ? Vary 3.3V
59 5 P55 ←I/O→ Connected to South Bridge CXD9963GB pad S19 3.3V
60 5 P56 ←I/O→ Connected to South Bridge CXD9963GB pad V22. And in line 47ohms (SB_INT?) 3.3V
61 5 P57 ←I/O→ Connected to South Bridge CXD9963GB pad U18 3.3V
62 1 P17 RSX_VINTE0/VD_VINT0
In
 Connected to RSX pad AR22 (RSX layout 41x41), or pad UNK (RSX layout 34x34) through a 10k resistor 1.5V
63 1 P16 RSX_CGRST
Not Connected
 Connected to RSX pad AV6 (RSX layout 41x41), or pad UNK (RSX layout 34x34)
This pin is "nerfed" with a 10k resistor to GND in RSX41x41 pad AV6 so syscon is not able to RESET the RSX CG		 0.8V
64 1 P15 RSX_VINTE1/VD_VINT1
In
 Connected to RSX pad AL38 (RSX layout 41x41), or pad UNK (RSX layout 34x34) 1.5V
65 1 P14 RSX_RESET
Out
 Connected to RSX pad AW5 (RSX layout 41x41), or pad UNK (RSX layout 34x34) 1.5V
66 1 P13 RSX_SPI_CS
Out
 Connected to RSX pad AW8 (RSX layout 41x41), or pad UNK (RSX layout 34x34) 1.5V
67 1 SO00 RSX_SPI_DO
Out
 Connected to RSX pad AY8 (RSX layout 41x41), or pad UNK (RSX layout 34x34) 1.5V
68 1 SI00 RSX_SPI_DI
In
 Connected to RSX pad BA7 (RSX layout 41x41), or pad UNK (RSX layout 34x34)
69 1 SCK00 RSX_SPI_CLK
Out
 Connected to RSX pad BA6 (RSX layout 41x41), or pad UNK (RSX layout 34x34)
70 AVREF1
Others
 1.5V
71 11 P110/ANO0 ←I/O→ Connected to a testpad near SC
72 11 P111/ANO1 RSX_INT
In
 Connected to RSX pad AY7 (RSX layout 41x41), or pad UNK (RSX layout 34x34) 1.5V
73 AVREF0
Others
 1.2V
74 AVSS GND
Others
75 15 P157 BE_POWGOOD ←I/O→ 1.2V
76 15 P156 BE_RESET_AND ←I/O→ Resistor to GND ? 1.2V
77 15 P155 BE_SPI_DO
Out
 Connected to CELL pad. (MOSI) Serial Output from Syscon Master to Cell Slave
78 15 P154 BE_SPI_DI
In
 Connected to CELL pad. (MISO) Serial Input from Cell Slave to Syscon Master
79 15 P153 BE_SPI_CLK
Out
 Connected to CELL pad. 2.5 Mhz SPI Clock 1.2V
80 15 P152 BE_SPI_CS
Out
 Connected to CELL pad. Chip Select Vary 1.2V
81 15 P151 BE_INT/ATTENTION
In
 Connected to CELL pad BA17 through a NPN transistor (CELL switches the transistor to connect this pin to GND)
82 15 P150 THERMAL_OVERLOAD ←I/O→ To a testpad Vary
83 2 P27/ANI7 ←I/O→ Connected to Switch board power switch ? (POW_SW?) 3.3V 3.3V
84 2 P26/ANI6 ←I/O→ Connected to Switch board eject switch ? (EJECT_SW?). And to a testpad
85 2 P25/ANI5 WIFI_DATA_1 ←I/O→ 10K resistor to GND, to testpad, and to 100ohms resistor to Wifi/BT module. See: wifi/BT 10x7 pinout or wifi/BT 9x7 pinout
86 2 P24/ANI4 WIFI_DATA_2 ←I/O→ 10K resistor to GND, to testpad, and to 100ohms resistor to Wifi/BT module. See: wifi/BT 10x7 pinout or wifi/BT 9x7 pinout
87 2 P23/ANI3 ←I/O→ 3.3V
88 2 P22/ANI2 ←I/O→ Connected to Bluray Drive through 100ohm resistor array ???. See: pins 115,116,117 (port 2)
89 2 P21/ANI1 ←I/O→ Connected to Bluray Drive through 100ohm resistor array ???. See: pins 115,116,117 (port 2) 3.3V
90 2 P20/ANI0 ←I/O→ Connected to Bluray Drive through 100ohm resistor array ???. See: pins 115,116,117 (port 2) 3.3V 3.3V
91 13 P130 ACDC_STBY ? O→ Connected to standby voltage regulator 348A, pins 2 and 7 EN_HDMI ? 3.3V
92 13 P131/TI06/TO06 ←I/O→ Connected to a voltage regulator ? 3.3V
93 0 P04/SCK10/SCL10 ←I/O→ Connected to Digital Video Encoder CXM4027R pin 35 ? (DVE_I2C_SCL ?) 3.3V
94 0 P03/SI10/RxD1/SDA10 ←I/O→ Connected to Digital Video Encoder CXM4027R pin 36 ? (DVE_I2C_SDA ?) 3.3V
95 0 P02/SO10/TxD1 ←I/O→ 3.3V
96 0 P01/TO00 ←I/O→ Connected to HDMI controller MN8647091 pin 93 ??? 1.5V
97 0 P00/TI00 ←I/O→
98 14 TO07 FANPWM0
Out
 Connected to the FAN grey wire (PWM duty) 0.8V
99 14 P144/SO20/TxD2 ←I/O→ 3.3V
100 14 SDA20 HDMI_I2C_SDA
In/Out
 Connected to HDMI controller MN8647091 pin 29 0
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Template:Syscon_pinout_LQFP_100_pins&oldid=66892"