Template:Syscon checksums: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
mNo edit summary |
||
| Line 19: | Line 19: | ||
|- | |- | ||
! rowspan="3" | [[Sherwood]] | ! rowspan="3" | [[Sherwood]] | ||
| rowspan="3" | 0x7FE || 0x000 - 0x24F || unknown || <!-- Virtual EEPROM offset 0x0 overrides syscon firmware offset 0xA0000, with a minimal lenght of 0x40 bytes --> | | rowspan="3" | 0x7FE || 0x000 - 0x24F || unknown || <!-- Virtual EEPROM offset 0x0 overrides syscon firmware offset 0x60000 (SW) or 0xA0000 (SW2/3), with a minimal lenght of 0x40 bytes --> | ||
|- | |- | ||
| 0x250 - 0x44F || '''[[Syscon Thermal Config|Thermal Config]]''' || | | 0x250 - 0x44F || '''[[Syscon Thermal Config|Thermal Config]]''' || | ||
Revision as of 20:14, 29 November 2021
| Syscon series | Checksum at address | Regions covered | Region name | Notes |
|---|---|---|---|---|
| Mullion | 0x32FE | 0x3100 - 0x31FF | Platform Config | |
| 0x3200 - 0x32FD | Hardware Config | |||
| 0x34FE | 0x3300 - 0x34FD | Thermal Config | ||
| 0x39FE | 0x3900 - 0x39FD | Board Config | ||
| 0x3DFE | 0x3C00 - 0x3DFD | not used (filled with FF's) | Checksum is always 0x00ff | |
| 0x3FFE | 0x3E00 - 0x3FFD | not used (filled with FF's) | Checksum is always 0x00ff | |
| Sherwood | 0x7FE | 0x000 - 0x24F | unknown | |
| 0x250 - 0x44F | Thermal Config | |||
| 0x450 - 0x7FD | not used (filled with FF's) | |||