Emulation

For backwards- and crossproduct compatibility, several files in dev_flash are available/used.

ps1emu

Note: not available in early Tool/DECR and Debug/DEX firmwares.

Files

 ps1_emu.self      (1.02++)
 ps1_netemu.self   (1.70++)
 ps1_newemu.self   (2.10++)
 ps1_rom.bin       (2.10++)

Manual starting SELF method

1. Insert PSX/PSone disc (region/pressed doesn't matter)
2. Start MultiMAN (e.g. 2.07.01++)

• Since 02.07.05 the PSX and PS2 discs are properly detected. PSX discs will show in XMB Game Column and you can launch the PS1 game from there. It uses ps1_emu.self default (you can choose Load or Load (Net), latter uses ps1_netemu).

1. Switch to filemanager mode
2. Browse to /dev_flash/ps1emu
3. Select either one of the ps1 emulation SELF files

Note: Some games run better with ps1_emu.self (e.g. Motal Kombat) while others run better with ps1_netemu.self (e.g. Resident Evil 3). If it doesn't work, try another ps1 emulation SELF file.

Downside: memory card options are unavailable unless you created a Virtual Memorycard before starting MultiMAN (XMB::Category Game:: Memory Card Utility (PS/PS2) > Create a PS1 memory card. Set it to Slot 1 (Press Triangle while selecting the Memory Card, then Assign it).

ps2emu

Note: not available in early Tool/DECR and Debug/DEX firmwares.

Files

 ps2_emu.self       (1.02++)
 ps2_gxemu.self     (1.50++)
 ps2_softemu.self   (1.90++)

Mountpoints

 dev_ps2disc
 dev_ps2disc1 

LPAR / AUTH ID's

Name	Auth ID	Self (/dev_flash/ps2emu)	Notes
PS2_LPAR	0x1020000003000001	ps2_emu.self
*SCE_CELLOS_SYSTEM_MGR_PS2	0x107000001D000001
PS2_GX_LPAR	0x1020000003000001	ps2_gxemu.self
*SCE_CELLOS_SYSTEM_MGR_PS2_GX	0x107000001D000001
PS2_SW_LPAR	0x1020000003000001	ps2_softemu.self
*SCE_CELLOS_SYSTEM_MGR_PS2_SW	0x107000001D000001

Difference Emulator Usage

PS2_GX
Core	Job	Source	Notes
SPU0	IOP	SPU ASM
SPU1	DMA	SPU ASM
SPU2	Isolation	C++ Raw SPU	Used for MagicGate Encryption and others (?)
SPU3	IPU	SPU ASM
SPU4	GFIF	SPU ASM
SPU5	PS2-SPU2	C++	about 50% load average
SPU6	VU1	SPU ASM
SPU7	-	-	Unavailable: Factory disabled SPU
PPU:0	PS2-Devices	C++ and PPU ASM
PPU:1	Emotion Engine	C++ and PPU ASM
PS2-GS	Graphic Synthesizer	Hardware PS2-GS	Present in CECHC/COK-002
PS2 (GS+EE)
Core	Job	Source	Notes
SPU0	IOP	SPU ASM
SPU2	Isolation	C++ Raw SPU	Used for MagicGate Encryption and others (?)
-	DMA	Hardware PS2-EE
-	VU1	Hardware PS2-EE
-	IPU	Hardware PS2-EE
-	GFIF	Hardware PS2-EE
SPU5	PS2-SPU2	C++	about 50% load average
SPU7	-	-	Unavailable: Factory disabled SPU
PPU:0	PS2-Devices	C++ and PPU ASM
PPU:1	-	-	unused?
PS2-EE	Emotion Engine	Hardware PS2-EE	Present in CECHA/COK-001 and CECHB/COK-001
PS2-GS	Graphic Synthesizer	Hardware PS2-GS	Present in CECHA/COK-001 and CECHB/COK-001
PS2 Software
problematic, see Mathieulh quoted below The main issue here is that it's mostly not doable to emulate the GS efficiently with the rest of the hardware because the RSX is just not meant for this task and cannot emulate the GS on its own while all the available SPUs and the PPU are already mostly fully used to emulate the rest of the playstation 2 hardware, this explains why sony never could finish the ps2_softemu and that it reached a stalling step. I honestly have no idea on how it would be possible to get over the ps3 hardware limitations to perform a full ps2 emulation without any of the ps2 hardware present on the console, one thing for sure is that the emulator would have to be entirely rewritten and optimized like no other ps3 software has been.

pspemu

Used for PSPMini's

Files

 psp_emulator.self     (3.15++)
 psp_translator.self   (3.15++)
 \flash0               (3.15++)
 \release              (3.15++)