Template:KSW-001 pinout: Difference between revisions
Jump to navigation
Jump to search
(moved from Switch boards page) |
mNo edit summary |
||
| Line 1: | Line 1: | ||
{| class="wikitable sortable" | {| class="wikitable sortable" | ||
|+KSW-001 Pinout {{ed right|KSW-001 pinout}} | |+[[KSW-001]] Pinout {{ed right|KSW-001 pinout}} | ||
! rowspan="2" | Pin !! colspan="2" | Signal/Connected to !! rowspan="2" | Description | ! rowspan="2" | Pin !! colspan="2" | Signal/Connected to !! rowspan="2" | Description | ||
|- | |- | ||
Revision as of 05:24, 19 July 2017
| Pin | Signal/Connected to | Description | |
|---|---|---|---|
| On Motherboard | On Switch board | ||
| 1 | EJECT switch | Sink to ground to activate | |
| 2 | VCC | VCC | +5V DC VCC |
| 3 | POWER switch | Sink to ground to activate | |
| 4 | RED led | Connects to right-top corner pin (red gnd) of dual red/green LED over power switch, | |
| 5 | GREEN led | Connects to top right corner pin (green gnd) of dual red/green LED over power switch, | |
| 6 | GND | GND | Ground |
- above top panel view port behind pcb. resistors was not tested.