Talk:Harddrive: Difference between revisions
Jump to navigation
Jump to search
m (→HDD partitions) |
m (→HDD partitions) |
||
| Line 86: | Line 86: | ||
===HDD partitions=== | ===HDD partitions=== | ||
{| class="wikitable" style="font-size:x-small;" | {| class="wikitable" style="font-size:x-small;" | ||
| Line 117: | Line 98: | ||
|- | |- | ||
! rowspan=21 | ps3d<BR />(3) | ! rowspan=21 | ps3d<BR />(3) | ||
|- {{cellcolors|# | |- {{cellcolors|#9999ff}} | ||
| rowspan=20 | ps3da<BR />(3.0) || colspan=4 | || colspan=3 | || colspan=4 | || style="text-align:right;" | 4 KB (4.096) || style="text-align:right;" | 8 || style="text-align:right;" | 0x1000 || style="text-align:right;" | 0x8 || Same || colspan=2 | | | rowspan=20 | ps3da<BR />(3.0) || colspan=4 | || colspan=3 | || colspan=4 | || style="text-align:right;" | 4 KB (4.096) || style="text-align:right;" | 8 || style="text-align:right;" | 0x1000 || style="text-align:right;" | 0x8 || Same || colspan=2 | [[Resizing_VFLASH_Storage_Device#Example_Of_An_Unmodified_HDD_Partition_Table | HDD Partition Table]] (Physical HDD Device) | ||
|- | |- | ||
| rowspan=12 {{cellcolors|# | | rowspan=12 {{cellcolors|#ddddff}} ps3vflash<BR />(3.1) || colspan=2 {{cellcolors|#ddddff}} || {{cellcolors|#ddddff}} ? || SCE_CELLOS_PME<BR />PS3_LPAR || 1070000001000001<BR />1070000002000001 || 0B<BR />03 || ↑:AES-CBC-192 (ata key) <BR />↓:AES-CBC-128 (encdec key) || ↑:XTS-AES-128 (ata key)<BR />↓:XTS-AES-128 (encdec key) || colspan=2 | Raw access || style="text-align:right;" | 256 MB (268.435.456) || style="text-align:right;" | 524.288 || style="text-align:right;" | 0x10000000 || style="text-align:right;" | 0x80000 || Any || colspan=2 | First region of HDD, contains VFLASH. (only NOR) | ||
|- {{cellcolors|# | |- {{cellcolors|#9999ff}} | ||
| rowspan=11 | ps3vflasha<BR />(3.1(1.0)) || colspan=2 | || colspan=3 | || colspan=4 | || style="text-align:right;" | 4 KB (4.096) || style="text-align:right;" | 8 || style="text-align:right;" | 0x1000 || style="text-align:right;" | 0x8 || Same || colspan=2 | | | rowspan=11 | ps3vflasha<BR />(3.1(1.0)) || colspan=2 | || colspan=3 | || colspan=4 | || style="text-align:right;" | 4 KB (4.096) || style="text-align:right;" | 8 || style="text-align:right;" | 0x1000 || style="text-align:right;" | 0x8 || Same || colspan=2 | [[Dev_Tools#flash_dumper | VFLASH Partition Table]] (Virtual FLASH Device, only NOR) | ||
|- | |- | ||
| {{cellcolors|# | | {{cellcolors|#ddddff}} ps3vflashb<BR />(3.1(1.1)) || {{cellcolors|#ddddff}} ? || SCE_CELLOS_PME || 1070000001000001 || 03 || ↑:AES-CBC-192 (ata key)<BR />↓:AES-CBC-128 (encdec key) || ↑:XTS-AES-128 (ata key)<BR />↓:XTS-AES-128 (encdec key) || colspan=2 | Raw access ? || style="text-align:right;" | 14,75 MB (15.462.400) || style="text-align:right;" | 30.200 || style="text-align:right;" | 0xEBF000 || style="text-align:right;" | 0x75F8 || Same || colspan=2 | "mirror" of real NOR second region: "ps3nflashb" ? | ||
|- {{cellcolors|lightgrey}} | |- {{cellcolors|lightgrey}} | ||
| colspan=2 | || colspan=3 | || colspan=4 | || style="text-align:right;" | 256 KB (262.144) || style="text-align:right;" | 512 || style="text-align:right;" | 0x40000 || style="text-align:right;" | 0x200 || Same || colspan=2 | ? | | colspan=2 | || colspan=3 | || colspan=4 | || style="text-align:right;" | 256 KB (262.144) || style="text-align:right;" | 512 || style="text-align:right;" | 0x40000 || style="text-align:right;" | 0x200 || Same || colspan=2 | ? | ||
|- | |- | ||
| {{cellcolors|# | | {{cellcolors|#ddddff}} ps3vflashc<BR />(3.1(1.2)) || {{cellcolors|#ddddff}} dev_flash || PS3_LPAR<BR />SCE_CELLOS_PME<BR />PS2_*LPAR || 1070000002000001<BR />1070000001000001<BR />1020000003000001 || 03<BR />03<BR />01 || ↑:AES-CBC-192 (ata key)<BR />↓:AES-CBC-128 (encdec key) || ↑:XTS-AES-128 (ata key)<BR />↓:XTS-AES-128 (encdec key) || colspan=2 | FAT16 || style="text-align:right;" | 199,75 MB (209.453.056) || style="text-align:right;" | 409.088 || style="text-align:right;" | 0xC7C0000 || style="text-align:right;" | 0x63E00 || Same || colspan=2 | Firmware files | ||
|- | |- | ||
| {{cellcolors|# | | {{cellcolors|#ddddff}} ps3vflashd<BR />(3.1(1.3)) || {{cellcolors|#ddddff}} dev_flash2 || PS3_LPAR<BR />SCE_CELLOS_PME || 1070000002000001<BR />1070000001000001 || 03<BR />03 || ↑:AES-CBC-192 (ata key)<BR />↓:AES-CBC-128 (encdec key) || ↑:XTS-AES-128 (ata key)<BR />↓:XTS-AES-128 (encdec key) || colspan=2 | FAT16 || style="text-align:right;" | 16 MB (16.777.216) || style="text-align:right;" | 32.768 || style="text-align:right;" | 0x1000000 || style="text-align:right;" | 0x8000 || Same || colspan=2 | XRegistry (Console/User settings) | ||
|- | |- | ||
| {{cellcolors|# | | {{cellcolors|#ddddff}} ps3vflashe<BR />(3.1(1.4)) || {{cellcolors|#ddddff}} dev_flash3 || PS3_LPAR<BR />SCE_CELLOS_PME || 1070000002000001<BR />1070000001000001 || 03<BR />03 || ↑:AES-CBC-192 (ata key)<BR />↓:AES-CBC-128 (encdec key) || ↑:XTS-AES-128 (ata key)<BR />↓:XTS-AES-128 (encdec key) || colspan=2 | FAT12 || style="text-align:right;" | 512 KB (524.288) || style="text-align:right;" | 1.024 || style="text-align:right;" | 0x80000 || style="text-align:right;" | 0x400 || Same || colspan=2 | CRL/DRL (Bluray revocation lists) | ||
|- | |- | ||
| {{cellcolors|# | | {{cellcolors|#ddddff}} ps3vflashf<BR />(3.1(1.5)) || {{cellcolors|#ddddff}} ? || PS3_LPAR<BR />SCE_CELLOS_PME<BR />LINUX_LPAR ||1070000002000001<BR />1070000001000001<BR />1080000004000001 || 03<BR />03<BR />03 || ↑:AES-CBC-192 (ata key)<BR />↓:AES-CBC-128 (encdec key) || ↑:XTS-AES-128 (ata key)<BR />↓:XTS-AES-128 (encdec key) || colspan=2 | Raw access || style="text-align:right;" | 4 MB (4.194.304) || style="text-align:right;" | 8.192 || style="text-align:right;" | 0x400000 || style="text-align:right;" | 0x2000 || Any || cell_ext_os_area +<BR />OtherOS bootloader<BR /><small>(compressed: otheros.bld)</small> || cell_ext_os_area +<BR />OtherOS++ bootloader<BR /><small>(uncompressed: dtbImage.ps3.bin)</small> | ||
|- {{cellcolors|lightgrey}} | |- {{cellcolors|lightgrey}} | ||
| colspan=2 | || colspan=3 | || colspan=4 | || style="text-align:right;" | 4,25 MB (4.456.448) || style="text-align:right;" | 8.704 || style="text-align:right;" | 0x440000 || style="text-align:right;" | 0x2200 || Same || colspan=2 | ? | | colspan=2 | || colspan=3 | || colspan=4 | || style="text-align:right;" | 4,25 MB (4.456.448) || style="text-align:right;" | 8.704 || style="text-align:right;" | 0x440000 || style="text-align:right;" | 0x2200 || Same || colspan=2 | ? | ||
|- | |- | ||
| {{cellcolors|# | | {{cellcolors|#ddddff}} ps3vflashg<BR />(3.1(1.6)) || {{cellcolors|#ddddff}} ? || SCE_CELLOS_PME || 1070000001000001 || 03 || ↑:AES-CBC-192 (ata key)<BR />↓:AES-CBC-128 (encdec key) || ↑:XTS-AES-128 (ata key)<BR />↓:XTS-AES-128 (encdec key) || colspan=2 | Raw access ? || style="text-align:right;" | 256 KB (262.144) || style="text-align:right;" | 512 || style="text-align:right;" | 0x40000 || style="text-align:right;" | 0x200 || Same || colspan=2 | ? | ||
|- {{cellcolors|lightgrey}} | |- {{cellcolors|lightgrey}} | ||
| colspan=2 | || colspan=3 | || colspan=4 | || rowspan=2 style="text-align:right;" | 16,25 MB (17.039.360) || style="text-align:right;" rowspan=2 | 33.280 || style="text-align:right;" rowspan=2 | 0x1040000 || style="text-align:right;" rowspan=2 | 0x8200 || No ? || colspan=2 | Padding | | colspan=2 | || colspan=3 | || colspan=4 | || rowspan=2 style="text-align:right;" | 16,25 MB (17.039.360) || style="text-align:right;" rowspan=2 | 33.280 || style="text-align:right;" rowspan=2 | 0x1040000 || style="text-align:right;" rowspan=2 | 0x8200 || No ? || colspan=2 | Padding | ||
|- | |- | ||
| {{cellcolors|# | | {{cellcolors|#ddddff}} ps3vflashh<BR />(3.1(1.7)) || {{cellcolors|#ddddff}} ? || No || No || No || ↑:AES-CBC-192 (ata key)<BR />↓:AES-CBC-128 (encdec key) || ↑:XTS-AES-128 (ata key)<BR />↓:XTS-AES-128 (encdec key) || Not<BR />used || <small>All supported<BR />by linux kernel</small> || Any || Not used || <small>Linux/FreeBSD for NOR PS3's<BR />Based on graf drivers (deprecated)</small> | ||
|- {{cellcolors|lightgrey}} | |- {{cellcolors|lightgrey}} | ||
| colspan=4 | || colspan=3 | || colspan=4 | || style="text-align:right;" | 4 KB (4.096) || style="text-align:right;" | 8 || style="text-align:right;" | 0x1000 || style="text-align:right;" | 0x8 || Same ? || colspan=2 | Padding ? (can vary, see notes for NAND/NOR) | | colspan=4 | || colspan=3 | || colspan=4 | || style="text-align:right;" | 4 KB (4.096) || style="text-align:right;" | 8 || style="text-align:right;" | 0x1000 || style="text-align:right;" | 0x8 || Same ? || colspan=2 | Padding ? (can vary, see notes for NAND/NOR) | ||
|- | |- | ||
| colspan=3 {{cellcolors|# | | colspan=3 {{cellcolors|#ddddff}} ps3db<BR />(3.2) || {{cellcolors|#ddddff}} dev_hdd0 || SCE_CELLOS_PME<BR />PS3_LPAR<BR />PS2_*LPAR || 1070000001000001<BR />1070000002000001<BR />1020000003000001 || 03<BR />03<BR />03 || ↑:AES-CBC-192 (ata key)<BR />↓:No || ↑:XTS-AES-128 (ata key)<BR />↓:No || colspan=2 | UFS2 || colspan=5 style="text-align:center;" | Any || colspan=2 | GameOS | ||
|- {{cellcolors|lightgrey}} | |- {{cellcolors|lightgrey}} | ||
| colspan=4 | || colspan=3 | || colspan=4 | || style="text-align:right;" | 4 KB (4.096)) || style="text-align:right;" | 8 || style="text-align:right;" | 0x1000 || style="text-align:right;" | 0x8 || Same ? || colspan=2 | Padding | | colspan=4 | || colspan=3 | || colspan=4 | || style="text-align:right;" | 4 KB (4.096)) || style="text-align:right;" | 8 || style="text-align:right;" | 0x1000 || style="text-align:right;" | 0x8 || Same ? || colspan=2 | Padding | ||
|- | |- | ||
| colspan=3 {{cellcolors|# | | colspan=3 {{cellcolors|#ddddff}} ps3dc<BR />(3.3) || {{cellcolors|#ddddff}} dev_hdd1 || SCE_CELLOS_PME<BR />PS3_LPAR || 1070000001000001<BR />1070000002000001 || 03<BR />03 || ↑:AES-CBC-192 (ata key)<BR />↓:No || ↑:XTS-AES-128 (ata key)<BR />↓:No || colspan=2 | FAT16 || style="text-align:right;" | 2 GB (2.147.479.552) || style="text-align:right;" | 4.194.296 || style="text-align:right;" | 0x7FFFF000 || style="text-align:right;" | 0x3FFFF8 || Same || colspan=2 | GameOS Cache | ||
|- {{cellcolors|lightgrey}} | |- {{cellcolors|lightgrey}} | ||
| colspan=4 | || colspan=3 | || colspan=4 | || style="text-align:right;" | 4 KB (4.096) || style="text-align:right;" | 8 || style="text-align:right;" | 0x1000 || style="text-align:right;" | 0x8 || Same ? || colspan=2 | Padding | | colspan=4 | || colspan=3 | || colspan=4 | || style="text-align:right;" | 4 KB (4.096) || style="text-align:right;" | 8 || style="text-align:right;" | 0x1000 || style="text-align:right;" | 0x8 || Same ? || colspan=2 | Padding | ||
|- | |- | ||
| colspan=3 {{cellcolors|# | | colspan=3 {{cellcolors|#ddddff}} ps3dd<BR />(3.4) || {{cellcolors|#ddddff}} dev_hdd2 ? || ? || ???????????????? || ?? || ↑:AES-CBC-192 (ata key)<BR />↓:No || ↑:XTS-AES-128 (ata key)<BR />↓:No || colspan=2 | <small>All supported<BR />by linux kernel</small> || colspan=4 style="text-align:center;" | 10GB <small>(0x13FFFF8 sectors)</small><BR />All available except 10GB <small>(All - 0x13FFFF8 sectors)</small> || Any || OtherOS<BR /><small>(disabled in firmware 3.21)</small> || <small>Linux/FreeBSD for NAND/NOR PS3's<BR />Based on glevand drivers</small> | ||
|- {{cellcolors|lightgrey}} | |- {{cellcolors|lightgrey}} | ||
| colspan=4 | || colspan=3 | || colspan=4 | || style="text-align:right;" | 4 KB (4.096) || style="text-align:right;" | 8 || style="text-align:right;" | 0x1000 || style="text-align:right;" | 0x8 || Same ? || colspan=2 | Padding | | colspan=4 | || colspan=3 | || colspan=4 | || style="text-align:right;" | 4 KB (4.096) || style="text-align:right;" | 8 || style="text-align:right;" | 0x1000 || style="text-align:right;" | 0x8 || Same ? || colspan=2 | Padding | ||
| Line 174: | Line 155: | ||
*Devices contains a single physical partition | *Devices contains a single physical partition | ||
*Physical partitions contains one or more logicall partitions | *Physical partitions contains one or more logicall partitions | ||
*Padding Notes: | |||
**7th region of vflash (ps3vflashg) ends at sector 0x77E00. vflash is 0x80000 sectors size, so the "not used area" after ps3vflashg has a size of: 0x80000 - 0x77E00 = 0x8200 sectors = 17039360 bytes (16,25 MB) | |||
**The padding between regions defined in "HDD Partition Table" seems to be 0x8 sectors size (see [http://www.psdevwiki.com/ps3/Hypervisor_Reverse_Engineering#HDD_device graf notes]) but the padding can be different when using unnofficial rebuild methods ([http://gitorious.ps3dev.net/ps3otheros/scripts/blobs/master/create_hdd_region.sh create_hdd_region.sh] adds a padding of 0x8 before and another 0x8 after the new region, concatenating new regions with this script generates double padding). Or when modifying the "HDD Partition Table" manually is posible to remove all padding then let the system generate the new region by himself | |||
**vflash displacement | |||
***NAND: ps3db region starts at sector 0x20 ? (displaced 0x8 sectors by "HDD partition table" + 0x10 ??? + 0x8 ???) | |||
***NOR: ps3db region starts at sector 0x80018 (displaced 0x8 sectors by "HDD partition table" + 0x80000 by vflash + 0x10 ???) | |||
*Encryption Notes: ????? | |||
**Encryption is made "by sector" (data is accessed in chunks of 512 bytes and encrypted/decrypted individually), applyed "at write time" (only used sectors are encrypted), and "by device" (real and virtual devices). In the practise this means for PS3 NAND models all the HDD sectors are under 1 single encryption layer, but for PS3 NOR models (with a "virtual flash device" embedded inside "real hdd device") there is a "top" encryption layer over the whole HDD, and a "bottom" encryption layer over VFLASH (or in other words... in NOR models the sectors inside VFLASH are encrypted 2 times) | |||
**HDD encryption layer (top), based in the '''ata-data-key''': | |||
***FAT-NAND (no vflash): AES-CBC-192 (ata-data-key and zeroed IV) | |||
***FAT-NOR (with vflash): AES-CBC-192 (ata-data-key and zeroed IV) ? | |||
***SLIM-NOR (with vflash): XTS-AES-128 (ata-data-key and ata-tweak-key) | |||
**VFLASH encryption layer (bottom), based in the '''encdec-key''': | |||
***FAT-NOR (with vflash): AES-CBC-128 (encdec-key and zeroed IV) | |||
***SLIM-NOR (with vflash): XTS-AES-128 (encdec-data-key and encdec-tweak-key) | |||
---- | |||
Partition formatting in a service mode firmware installation for NOR flash. Google it: http://lmgtfy.com/?q=site%3Ahttp%3A%2F%2Fpastebin.com%2F+%22vflash+is+enabled...%22 | Partition formatting in a service mode firmware installation for NOR flash. Google it: http://lmgtfy.com/?q=site%3Ahttp%3A%2F%2Fpastebin.com%2F+%22vflash+is+enabled...%22 | ||
Revision as of 11:08, 12 April 2014
Todo
Need help getting data for the different SKU models and the default harddrive they are equiped with.
There is still some conflicting data to be sorted out, e.g.:
maximum size internal drive
The maximum size of the internal harddrive that the PS3 supports is 1TB (TeraBytes) note: this seems untrue as there are several people posting pictures of their external to internal drive mod with a size of 2TB
Personal experience
Using Normal Mode and Recovery - when trying to install a 1.5TB 3.5" drive as internal (using an eSATA cradle)
- Using Recovery it is possible to finish the format of the harddrive until 100%. The system however fails to reboot automaticly after that and halts. When enforced to reboot, it errors out with "Wrong Harddrive".
- When trying all the other Recovery Menu options it errors out with "Harddrive Error 0x8002F281".
- When trying to boot to XMB it also errors out with "Harddrive Error 0x8002F281".
- When replacing the drive for the previous tested 1TB harddrive, it boots without errors to XMB and reports : 827GB free/931GB total
- Conclusion
- >1TB didn't not work.
Using Factory Service Mode - when trying to install a 1.5TB 3.5" drive as internal (using an eSATA cradle) FSM
- Second try, using Service Mode
- first replacing drive for original 120GB 2.5" and using Factory Service Mode to downgrade to lowest firmware the system can handle (2K slim -> FW 2.70)
- Result is fine. Log showed no errors : UPDATER_LOG.TXT
- Replaced for 1.5TB 3.5" drive and do exactly the same 2.70 again
- Result is fine. Log showed no errors : UPDATER_LOG.TXT
- Boot to XMB with Service Mode still activated
- No problems to get into XMB, but checking System Settings > System Information shows size detection issues:
System Software Version 2.70 IP Address xxx.xxx.x.xxx MAX Address xx:xx:xx:xx:xx:xx Free Space 30 G
- Exit Factory Service Mode
- Blank screen freeze when trying to boot to XMB in normal mode
- Power off and try again gives "system software was not installed correct" error
- inserted USB with 2.70 on normal location and START+SELECT button to let it reinstall
- Preparing Update counts to 100% and then halts (does not reboot), just like in first trial.
- Manual poweroff and reboot just results in blank screen with no harddrive activity
- Conclusion
- >1TB didn't not work in normal or recovery mode only with FSM enabled.
Going back to the 1TB and crosschecking
- Replacing drive back to the working 1TB (has 3.55 on it) gives prompt to reinstall 2.70, doing so errors out with "Harddrive Error 0x8002F281".
- Entering Factory Service Mode with 1TB and let it reinstall via lv2diag results fine without errors: UPDATER_LOG.TXT
- Boot to XMB with Service Mode still activated
- No problems to get into XMB, but checking System Settings > System Information shows size detection issues (the '30 G' seems to be FSM related):
System Software Version 2.70 IP Address xxx.xxx.x.xxx MAX Address xx:xx:xx:xx:xx:xx Free Space 30 G
- Exit Factory Service Mode
- No problems to get into XMB, and checking System Settings > System Information shows no size detection issues:
System Software Version 2.70 IP Address xxx.xxx.x.xxx MAX Address xx:xx:xx:xx:xx:xx Free Space 827GB / 931GB
- Conclusion
- <=1TB works fine in all modi.
maximum size external drive
External HDD : You can format it to any size up to 8TB note: this seems untrue, because when >2TB drives have hit the market, no screenshots of >2TB external storage are known
- sources used: source: http://www.edepot.com/playstation3.html#PS3_Harddrive and euss temp blog
- todo: flush out errors, merging in a readable format
Footnote: maximum supported drive space correlates to support of 512sector (either native, or emulated), see: http://en.wikipedia.org/wiki/Advanced_Format
AES-256-CBC versus AES-256-XTS
There is conflicting mention of sources for the algo/mode used for GameOS encryption.
Fact:
- Sony/IBM loves AES
- 256bit based
- sectorsize 512 bytes (4096 bits)
- blockcipher
- recurring patterns are seen
Reference:
Experimental Tables
HDD partitions
| Storage Region | Access Control List | File System | Size | Usage | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OtherOS | GameOS | Secure Profile | Unk ? | Official | Unnofficial | Official | Unnofficial |
Official |
Unnofficial | ||||||||||
| Name | ACL's | Encryption | Type | Type | Decimal | Hexadecimal | |||||||||||||
| FAT | SLIM | Bytes | Sectors | Bytes | Sectors | ||||||||||||||
| ps3d (3) | |||||||||||||||||||
| ps3da (3.0) |
4 KB (4.096) | 8 | 0x1000 | 0x8 | Same | HDD Partition Table (Physical HDD Device) | |||||||||||||
| ps3vflash (3.1) |
? | SCE_CELLOS_PME PS3_LPAR |
1070000001000001 1070000002000001 |
0B 03 |
↑:AES-CBC-192 (ata key) ↓:AES-CBC-128 (encdec key) |
↑:XTS-AES-128 (ata key) ↓:XTS-AES-128 (encdec key) |
Raw access | 256 MB (268.435.456) | 524.288 | 0x10000000 | 0x80000 | Any | First region of HDD, contains VFLASH. (only NOR) | ||||||
| ps3vflasha (3.1(1.0)) |
4 KB (4.096) | 8 | 0x1000 | 0x8 | Same | VFLASH Partition Table (Virtual FLASH Device, only NOR) | |||||||||||||
| ps3vflashb (3.1(1.1)) |
? | SCE_CELLOS_PME | 1070000001000001 | 03 | ↑:AES-CBC-192 (ata key) ↓:AES-CBC-128 (encdec key) |
↑:XTS-AES-128 (ata key) ↓:XTS-AES-128 (encdec key) |
Raw access ? | 14,75 MB (15.462.400) | 30.200 | 0xEBF000 | 0x75F8 | Same | "mirror" of real NOR second region: "ps3nflashb" ? | ||||||
| 256 KB (262.144) | 512 | 0x40000 | 0x200 | Same | ? | ||||||||||||||
| ps3vflashc (3.1(1.2)) |
dev_flash | PS3_LPAR SCE_CELLOS_PME PS2_*LPAR |
1070000002000001 1070000001000001 1020000003000001 |
03 03 01 |
↑:AES-CBC-192 (ata key) ↓:AES-CBC-128 (encdec key) |
↑:XTS-AES-128 (ata key) ↓:XTS-AES-128 (encdec key) |
FAT16 | 199,75 MB (209.453.056) | 409.088 | 0xC7C0000 | 0x63E00 | Same | Firmware files | ||||||
| ps3vflashd (3.1(1.3)) |
dev_flash2 | PS3_LPAR SCE_CELLOS_PME |
1070000002000001 1070000001000001 |
03 03 |
↑:AES-CBC-192 (ata key) ↓:AES-CBC-128 (encdec key) |
↑:XTS-AES-128 (ata key) ↓:XTS-AES-128 (encdec key) |
FAT16 | 16 MB (16.777.216) | 32.768 | 0x1000000 | 0x8000 | Same | XRegistry (Console/User settings) | ||||||
| ps3vflashe (3.1(1.4)) |
dev_flash3 | PS3_LPAR SCE_CELLOS_PME |
1070000002000001 1070000001000001 |
03 03 |
↑:AES-CBC-192 (ata key) ↓:AES-CBC-128 (encdec key) |
↑:XTS-AES-128 (ata key) ↓:XTS-AES-128 (encdec key) |
FAT12 | 512 KB (524.288) | 1.024 | 0x80000 | 0x400 | Same | CRL/DRL (Bluray revocation lists) | ||||||
| ps3vflashf (3.1(1.5)) |
? | PS3_LPAR SCE_CELLOS_PME LINUX_LPAR |
1070000002000001 1070000001000001 1080000004000001 |
03 03 03 |
↑:AES-CBC-192 (ata key) ↓:AES-CBC-128 (encdec key) |
↑:XTS-AES-128 (ata key) ↓:XTS-AES-128 (encdec key) |
Raw access | 4 MB (4.194.304) | 8.192 | 0x400000 | 0x2000 | Any | cell_ext_os_area + OtherOS bootloader (compressed: otheros.bld) |
cell_ext_os_area + OtherOS++ bootloader (uncompressed: dtbImage.ps3.bin) | |||||
| 4,25 MB (4.456.448) | 8.704 | 0x440000 | 0x2200 | Same | ? | ||||||||||||||
| ps3vflashg (3.1(1.6)) |
? | SCE_CELLOS_PME | 1070000001000001 | 03 | ↑:AES-CBC-192 (ata key) ↓:AES-CBC-128 (encdec key) |
↑:XTS-AES-128 (ata key) ↓:XTS-AES-128 (encdec key) |
Raw access ? | 256 KB (262.144) | 512 | 0x40000 | 0x200 | Same | ? | ||||||
| 16,25 MB (17.039.360) | 33.280 | 0x1040000 | 0x8200 | No ? | Padding | ||||||||||||||
| ps3vflashh (3.1(1.7)) |
? | No | No | No | ↑:AES-CBC-192 (ata key) ↓:AES-CBC-128 (encdec key) |
↑:XTS-AES-128 (ata key) ↓:XTS-AES-128 (encdec key) |
Not used |
All supported by linux kernel |
Any | Not used | Linux/FreeBSD for NOR PS3's Based on graf drivers (deprecated) | ||||||||
| 4 KB (4.096) | 8 | 0x1000 | 0x8 | Same ? | Padding ? (can vary, see notes for NAND/NOR) | ||||||||||||||
| ps3db (3.2) |
dev_hdd0 | SCE_CELLOS_PME PS3_LPAR PS2_*LPAR |
1070000001000001 1070000002000001 1020000003000001 |
03 03 03 |
↑:AES-CBC-192 (ata key) ↓:No |
↑:XTS-AES-128 (ata key) ↓:No |
UFS2 | Any | GameOS | ||||||||||
| 4 KB (4.096)) | 8 | 0x1000 | 0x8 | Same ? | Padding | ||||||||||||||
| ps3dc (3.3) |
dev_hdd1 | SCE_CELLOS_PME PS3_LPAR |
1070000001000001 1070000002000001 |
03 03 |
↑:AES-CBC-192 (ata key) ↓:No |
↑:XTS-AES-128 (ata key) ↓:No |
FAT16 | 2 GB (2.147.479.552) | 4.194.296 | 0x7FFFF000 | 0x3FFFF8 | Same | GameOS Cache | ||||||
| 4 KB (4.096) | 8 | 0x1000 | 0x8 | Same ? | Padding | ||||||||||||||
| ps3dd (3.4) |
dev_hdd2 ? | ? | ???????????????? | ?? | ↑:AES-CBC-192 (ata key) ↓:No |
↑:XTS-AES-128 (ata key) ↓:No |
All supported by linux kernel |
10GB (0x13FFFF8 sectors) All available except 10GB (All - 0x13FFFF8 sectors) |
Any | OtherOS (disabled in firmware 3.21) |
Linux/FreeBSD for NAND/NOR PS3's Based on glevand drivers | ||||||||
| 4 KB (4.096) | 8 | 0x1000 | 0x8 | Same ? | Padding | ||||||||||||||
- This table (pretends to) show all the posible partition layouts in all PS3 models, even when there are 2 big differences that changes partition positions (and consequently region names in Otheros/linux)
- Flash type
- NAND flash 256mb - All firmware is stored in real NAND flash
- NOR flash 16mb - A small part of the firmware is stored in real NOR flash, and most of the firmware is stored in the first "virtual flash" (ps3vflash) partition in HDD (his position makes the other partitions to be displaced)
- OtherOS bootloader installation (usually petitboot or kboot)
- OtherOS bootloader official - petitboot is installed in region (1.5), his size is smaller than the region so no need to resize
- OtherOS++ bootloader unofficial - petitboot is installed in region (1.5), his size is bigger than the region so the region is resized conveniently (usually up to 8MB = 16384 sectors)
- OtherOS installation
- OtherOS official for NAND models - Linux/FreeBSD installed at region (3.4), last region of the HDD
- OtherOS++ unofficial for NOR models - Linux/FreeBSD installed at region (1.7), last region of vflash is created and resized conveniently (firmware installers doesnt creates this region)
- OtherOS/OtherOS++ unofficial for NOR/NAND models - Linux/FreeBSD installed at region (3.4), last region of the HDD
- Flash type
- Devices contains a single physical partition
- Physical partitions contains one or more logicall partitions
- Padding Notes:
- 7th region of vflash (ps3vflashg) ends at sector 0x77E00. vflash is 0x80000 sectors size, so the "not used area" after ps3vflashg has a size of: 0x80000 - 0x77E00 = 0x8200 sectors = 17039360 bytes (16,25 MB)
- The padding between regions defined in "HDD Partition Table" seems to be 0x8 sectors size (see graf notes) but the padding can be different when using unnofficial rebuild methods (create_hdd_region.sh adds a padding of 0x8 before and another 0x8 after the new region, concatenating new regions with this script generates double padding). Or when modifying the "HDD Partition Table" manually is posible to remove all padding then let the system generate the new region by himself
- vflash displacement
- NAND: ps3db region starts at sector 0x20 ? (displaced 0x8 sectors by "HDD partition table" + 0x10 ??? + 0x8 ???)
- NOR: ps3db region starts at sector 0x80018 (displaced 0x8 sectors by "HDD partition table" + 0x80000 by vflash + 0x10 ???)
- Encryption Notes: ?????
- Encryption is made "by sector" (data is accessed in chunks of 512 bytes and encrypted/decrypted individually), applyed "at write time" (only used sectors are encrypted), and "by device" (real and virtual devices). In the practise this means for PS3 NAND models all the HDD sectors are under 1 single encryption layer, but for PS3 NOR models (with a "virtual flash device" embedded inside "real hdd device") there is a "top" encryption layer over the whole HDD, and a "bottom" encryption layer over VFLASH (or in other words... in NOR models the sectors inside VFLASH are encrypted 2 times)
- HDD encryption layer (top), based in the ata-data-key:
- FAT-NAND (no vflash): AES-CBC-192 (ata-data-key and zeroed IV)
- FAT-NOR (with vflash): AES-CBC-192 (ata-data-key and zeroed IV) ?
- SLIM-NOR (with vflash): XTS-AES-128 (ata-data-key and ata-tweak-key)
- VFLASH encryption layer (bottom), based in the encdec-key:
- FAT-NOR (with vflash): AES-CBC-128 (encdec-key and zeroed IV)
- SLIM-NOR (with vflash): XTS-AES-128 (encdec-data-key and encdec-tweak-key)
Partition formatting in a service mode firmware installation for NOR flash. Google it: http://lmgtfy.com/?q=site%3Ahttp%3A%2F%2Fpastebin.com%2F+%22vflash+is+enabled...%22
manufacturing updating start PackageName = /dev_usb000/PS3UPDAT.PUP settle polling interval success vflash is enabled... creating system regions... create storage region: (region id = 1) create storage region: (region id = 2) format partition: (region_id = 2, CELL_FS_UTILITY:HDD0, CELL_FS_UFS) create storage region: (region id = 3) format partition: (region_id = 3, CELL_FS_UTILITY:HDD1, CELL_FS_FAT) creating system regions done. boot from nor flash... creating nor flash regions... create storage region: (region id = 2) create storage region: (region id = 3) creating flash regions... create storage region: (region id = 1) create storage region: (region id = 2) format partition: (region_id = 2, CELL_FS_IOS:BUILTIN_FLSH1, CELL_FS_FAT) create storage region: (region id = 3) format partition: (region_id = 3, CELL_FS_IOS:BUILTIN_FLSH2, CELL_FS_FAT) create storage region: (region id = 4) format partition: (region_id = 4, CELL_FS_IOS:BUILTIN_FLSH3, CELL_FS_FAT) create storage region: (region id = 5) create storage region: (region id = 6)
Partition formatting in a service mode firmware installation for NAND flash. Google it: http://lmgtfy.com/?q=site%3Ahttp%3A%2F%2Fpastebin.com%2F+%22vflash+is+disabled...%22
manufacturing updating start PackageName = /dev_usb000/PS3UPDAT.PUP settle polling interval success vflash is disabled... boot from nand flash... creating flash regions... create storage region: (region id = 2) format partition: (region_id = 2, CELL_FS_IOS:BUILTIN_FLSH1, CELL_FS_FAT) create storage region: (region id = 3) format partition: (region_id = 3, CELL_FS_IOS:BUILTIN_FLSH2, CELL_FS_FAT) create storage region: (region id = 4) format partition: (region_id = 4, CELL_FS_IOS:BUILTIN_FLSH3, CELL_FS_FAT) create storage region: (region id = 5) create storage region: (region id = 6)
Other flash/hdd regions. Google it: http://lmgtfy.com/?q=site%3Ahttp%3A%2F%2Fpastebin.com%2F+%22CELL_FS_UTILITY%3AHDD2%22 and Mountpoints
CELL_FS_IOS:BUILTIN_FLSH1 CELL_FS_IOS:BUILTIN_FLSH2 CELL_FS_IOS:BUILTIN_FLSH3 CELL_FS_IOS:BUILTIN_FLSH4 CELL_FS_UTILITY:HDD0 CELL_FS_UTILITY:HDD1 CELL_FS_UTILITY:HDD2
Speed tests running in PS3 nativelly
| Brand | Series | Model | Linux | GameOs | ||
|---|---|---|---|---|---|---|
| [hdparm -Tt] | N/A | |||||
| Cache read (MB/s) |
Disk read (MB/s) |
Link | ||||
| Fujitsu | MHW | MHW2040BH | N/A | |||
| MHZ | MHZ2080BH | N/A | ||||
| MHZ2160BH | N/A | |||||
| Hitachi | Travelstar 5K160 | HTS541640J9SA00 | N/A | |||
| Travelstar 5K250 | HTS542580K9SA00 | N/A | ||||
| Travelstar 5K500 | HTS545012B9SA00 | N/A | ||||
| Travelstar Z5K500 | HTS545050A7E380 | N/A | ||||
| Seagate | Momentus 5400.2 | ST96812AS | N/A | |||
| Momentus 5400.3 | ST980811AS | N/A | ||||
| LD25 SATA | ST920217AS | N/A | ||||
| ST9402115AS | N/A | |||||
| LD25 5400.2 | ST940210AS | N/A | ||||
| Toshiba | MKxx52GSX | MK8052GSX | N/A | |||
| MK1652GSX | N/A | |||||
| MKxx55GSX | MK1255GSX | N/A | ||||
| MK2555GSX | N/A | |||||
| MKxx65GSX | MK1665GSX | N/A | ||||
| MK3265GSX | N/A | |||||
| MKxx76GSX | MK1676GSX | N/A | ||||
| MK3276GSX | N/A | |||||
Phat NAND HDD Entropy Table (After zerofill,no vflash)
| Start Offset | End Offset | Size | Description |
|---|---|---|---|
| 0x0000 | 0x1000 | 0x1000 | Header |
| 0x4000 | 0x16000 | 0x12000 | unknown |
| 0x18000 | 0x28000 | 0x10000 | unknown |
Slim NOR HDD Data Table (After zerofill,vflash)
| Start Offset | End Offset | Size | Description |
|---|---|---|---|
| 0x0 | 0x2000 | 0x2000 | Header |
| 0x4400 | 0x8118240 | please fill | unk |
| 0x8119000 | 0x8149960 | please fill | unk |
| 0x814B000 | 0x8152CB0 | please fill | unk |
| 0x8153000 | 0x81530C0 | please fill | unk |
| 0x8155000 | 0x8159B10 | please fill | unk |
| 0x815B000 | 0x815E3D0 | please fill | unk |
| 0x815F000 | 0x8166190 | please fill | unk |
| 0x8167000 | 0x817B750 | please fill | unk |
| 0x817D000 | 0x817D5C0 | please fill | unk |
| 0x817F000 | 0x818A500 | please fill | unk |
| 0x818B000 | 0x818CDC0 | please fill | unk |
| 0x818D000 | 0x81C9F10 | please fill | unk |
| 0x81CB000 | 0x81D1FD0 | please fill | unk |
| 0x81D3000 | 0x81D9E20 | please fill | unk |
| 0x81DB000 | 0x81DB1B0 | please fill | unk |
| 0x81DD000 | 0x81DD0A0 | please fill | unk |
| 0x81DF000 | 0x81DF090 | please fill | unk |
| 0x81E1000 | 0x81E1080 | please fill | unk |
| 0x81E3000 | 0x81E3090 | please fill | unk |
| 0x81E5000 | 0x81E50A0 | please fill | unk |
| 0x81E7000 | 0x81E70A0 | please fill | unk |
| 0x81E9000 | 0x81E9090 | please fill | unk |
| 0x81EB000 | 0x81F4CD0 | please fill | unk |
- There is actual readable data near the end of the disk, so this has been renamed to Data Table instead of Entropy Table
- The table is incomplete, please help filling it.
- the dump and key
GameOS fsck
code uses memory container ( there is also fsck without ) - does fsck on hdd0:
LOAD:0000000000030270 .set var_3C, -0x3C LOAD:0000000000030270 .set var_38, -0x38 LOAD:0000000000030270 .set var_34, -0x34 LOAD:0000000000030270 .set var_30, -0x30 LOAD:0000000000030270 .set var_20, -0x20 LOAD:0000000000030270 .set var_18, -0x18 LOAD:0000000000030270 .set arg_10, 0x10 LOAD:0000000000030270 LOAD:0000000000030270 lis r9, aFsck_cfs@h # "fsck_cfs" LOAD:0000000000030274 mflr r0 LOAD:0000000000030278 lis r11, aY@h # "-y" LOAD:000000000003027C lis r10, aHdd0@h # "hdd0" LOAD:0000000000030280 stdu r1, -0xB0(r1) LOAD:0000000000030284 addi r9, r9, aFsck_cfs@l # "fsck_cfs" LOAD:0000000000030288 addi r11, r11, aY@l # "-y" LOAD:000000000003028C addi r10, r10, aHdd0@l # "hdd0" LOAD:0000000000030290 std r28, 0xB0+var_20(r1) LOAD:0000000000030294 li r3, 1 = "App" LOAD:0000000000030298 li r28, 0 LOAD:000000000003029C stw r11, 0xB0+var_38(r1) LOAD:00000000000302A0 std r0, 0xB0+arg_10(r1) LOAD:00000000000302A4 stw r9, 0xB0+var_3C(r1) LOAD:00000000000302A8 stw r10, 0xB0+var_34(r1) LOAD:00000000000302AC std r29, 0xB0+var_18(r1) LOAD:00000000000302B0 stw r28, 0xB0+var_30(r1) LOAD:00000000000302B4 bl _vsh_E7C34044_getMemoryContainerId LOAD:00000000000302B8 clrldi r4, r3, 32 LOAD:00000000000302BC addi r6, r1, 0xB0+var_40 LOAD:00000000000302C0 li r5, 0x200 LOAD:00000000000302C4 lis r3, 0x200 LOAD:00000000000302C8 stw r28, 0xB0+var_40(r1) LOAD:00000000000302CC bl sys_memory_allocate_from_container LOAD:00000000000302D0 lis r7, stru_1429E8@h LOAD:00000000000302D4 lwz r5, 0xB0+var_40(r1) LOAD:00000000000302D8 addi r4, r1, 0xB0+var_3C LOAD:00000000000302DC addi r7, r7, stru_1429E8@l LOAD:00000000000302E0 lis r6, 0x200 LOAD:00000000000302E4 li r8, 0 LOAD:00000000000302E8 li r3, 3 LOAD:00000000000302EC bl _fs_utility_init_1F3CD9F1 LOAD:00000000000302F0 li r11, 0x15D # sys_memory_free LOAD:00000000000302F4 mr r29, r3 LOAD:00000000000302F8 lwz r3, 0xB0+var_40(r1) LOAD:00000000000302FC sc LOAD:0000000000030300 clrldi r3, r29, 32 LOAD:0000000000030304 bl _sysPrxForUser_sys_ppu_thread_exit LOAD:0000000000030308 lis r9, dword_146D74@h LOAD:000000000003030C ld r0, 0xB0+arg_10(r1) LOAD:0000000000030310 ld r29, 0xB0+var_18(r1) LOAD:0000000000030314 mtlr r0 LOAD:0000000000030318 stw r28, dword_146D74@l(r9) LOAD:000000000003031C ld r28, 0xB0+var_20(r1) LOAD:0000000000030320 addi r1, r1, 0xB0 LOAD:0000000000030324 blr LOAD:0000000000030324 # End of function fsck_cfs_main