Editing Template:Syscon pinout LQFP 128 pins

<br style="clear: both;" />
<span style="font-size:175%; font-family:Times New Roman;">Pinout</span>
----
<div style="float:right">[[File:Syscon pinout LQFP 128 pins.png|320px|thumbnail|right|Syscon pinout LQFP 128 pins<br>NEC/Renesas 78K0R/KH3 Optional pin configurations]]<br>[[File:Syscon SW2-303 Unsoldered.JPG|320px|thumbnail|right|Syscon [[SW2-303]] unsoldered<br>[[CECH-25xx]] with [[JTP-001]] or [[JSD-001]] motherboard]]<br>[[File:Syscon_SW2-303.jpg|320px|thumbnail|right|Syscon [[SW2-303]]<br>[[CECH-25xx]] with [[JTP-001]] or [[JSD-001]] motherboard]]<br>[[File:SYSCON GEN2.JPG|320px|thumbnail|right|Syscon [[SW-301]]<br>[[CECHLxx]] with [[VER-001]] motherboard]]</div>

<includeonly><div style="height:1400px; overflow:auto"></includeonly>
{|class="wikitable mw-datatable sortable"
|+ Syscon pinout LQFP 128 pins <span class="plainlinks" style="font-size:80%; float:right;">[ [[Template_talk:Syscon_pinout_LQFP_128_pins|Discuss]] ] or [ [{{fullurl:Template:Syscon_pinout_LQFP_128_pins|action=edit}} Edit] ]</span>
|-
! rowspan="2" | Pin# !! rowspan="2" | Port !! colspan="2" | Name !! rowspan="2" | Type !! rowspan="2" | Description !! rowspan="2" | STBY Voltages
|-
! <abbr title="NEC/Renesas optional pin configuration">NEC/Renesas</abbr> !! Sony/Custom
|-
| 1 || 14 || P142/<span style="text-decoration: overline;">SCK20</span>/SCL20  ||  || ←I || Connected to pin27 @Panasonic [[MN8647091]] (HDMI controller CEC data channel related with pins 127 and 128 ?) || 0
|-
| 2 || 14 || <s>P141/PCLBUZ1/</s>INTP7 || SB_INT/SYSCSINT || ←I || Connected to pinD1@SB [[CXD9963GB]] through the resistor || ~1V @ standby (0 V?)
|-
| 3 || 14 || <s>P140/PCLBUZ0/</s>INTP6 || BE_INT/ATTENTION || ←I || Connected to pinBA17@[[CELL BE|BE]] through the NPN transistor (CELL switches the transistor to connect this pin to GND) || 3V @ standby (3.15V)
|-
| 4 || 12 || P120/INTP0/EXLVI ||  || ←I/O→ || To +12V_MAIN through the resistor and divider (EXLVI config = External potential input for low-voltage detector ?) || 0
|-
| 5 || 3 || {{cellcolors|#d699ff}} P37 || POW_LED || O→ || Connected to dual led(Green) on [[switch boards|Switch board]] through the dual digital NPN trans. EMH1(SOT-563) || 0
|-
| 6 || 3 || {{cellcolors|#d699ff}} P36 || STBY_LED || O→ || Connected to dual led(Red) on [[switch boards|Switch board]] through the dual digital NPN trans. EMH1(SOT-563) || 3v @ standby (3.3V)
|-
| 7 || 3 || P35 ||  || ←I/O→ || Connected to pinAA18@SB [[CXD9963GB]] || 0
|-
| 8 || 3 || P34 ||  || ←I/O→ || Connected to pinAA17@SB [[CXD9963GB]] || 0
|-
| 9 || 3 || P33 ||  || ←I/O→ || CELL BE related? || 0
|-
| 10 || 3 || P32 ||  || ←I/O→ ||  || 0
|-
| 11 || 16 || {{cellcolors|#d699ff}} <s>P163/TI13/</s>TO13 || BACK_LEDS || O→ || Connected to Backlit LEDs on [[switch boards|Switch board]] || 0
|-
| 12 || 16 || {{cellcolors|#d699ff}} <s>P162/TI12/</s>TO12 || CONTOUR_LEDS || O→ || Connected to CONTOUR LEDs on [[switch boards|Switch board]] || 0
|-
| 13 || 16 || {{cellcolors|#e0e0e0}} <s>P161/TI11/TO11</s> || NOT_CONNECTED || - || Disconnected to GND through a missing SMD component. See: [[Media:Syscon_SW2-303_Unsoldered.JPG|NOWHERE]] || 0
|-
| 14 || 16 || {{cellcolors|#e0e0e0}} <s>P160/TI10/TO10</s> || NOT_CONNECTED || - || Disconnected to GND through a missing SMD component at the other side of the board. See: [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] || 0
|-
| 15 || 4 || P47/INTP2 ||  || ←I/O→ || Unknown purpose. The trace goes in the direction of the Wifi/BT module || 0
|-
| 16 || 4 || {{cellcolors|#123456|#ffffff}} <s>P46/INTP1/TI05/</s>TO05 || BUZZER || O→ || Connected to the base of a transistor that drives a pin of the buzzer to GND || 0
|-
| 17 || 4 || P45/SO01 ||  || ←I/O→ || SB_SPI_DO @[[CXD9963GB]] ? || 0
|-
| 18 || 4 || P44/SI01 ||  || ←I/O→ || SB_SPI_DI @[[CXD9963GB]] ? || 3v @ standby
|-
| 19 || 4 || P43/<span style="text-decoration: overline;">SCK01</span> ||  || ←I/O→ || SB_SPI_CLK @[[CXD9963GB]] ? || 0
|-
| 20 || 4 || P42/TI04/TO04 ||  || ←I/O→ || SB_SPI_CS @[[CXD9963GB]] ? || 0
|-
| 21 || 4 || {{cellcolors|#aa7744}} <s>P41/</s>TOOL1 || TOOL_CLK || O→ || Tool clock. Connected to Pin 13 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode || 3.0
|-
| 22 || 4 || {{cellcolors|#aa7744}} <s>P40/</s>TOOL0 || TOOL_DAT || ←I/O→ || Tool Data. Connected to Pin 7 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode || 0
|-
| 23 || 12 || P127/SO21 ||  || ←I/O→ ||  || 0
|-
| 24 || 12 || {{cellcolors|#808080|#FF4500}} <s>P126/SI21/</s>SDA21 || THR_I2C_SDA || ←I/O→ || SMBus data. Connected to pin 7 of CELL/RSX temperature monitors [[Thermal#Temperature_Monitors|TMP411A/B]] || 3v @ standby (3.15)
|-
| 25 || 12 || {{cellcolors|#808080|#FF4500}} <s>P125/SCK21/</s>SCL21 || THR_I2C_SCL || O→ || SMBus clock. Connected to pin 8 of CELL/RSX temperature monitors [[Thermal#Temperature_Monitors|TMP411A/B]] || 3v @ standby (3.15)
|-
| 26 ||  || {{cellcolors|#aa7744}} <span style="text-decoration: overline;">RESET</span> || RESET || ←I || Connected to Pin 9 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode. And to standby voltage regulator [[Talk:Regulators|463A]], pin 3 || 
|-
| 27 || 12 || {{cellcolors|#ff77bb}} <s>P124/</s>XT2 || XT_SUB || ←I || Subsystem clock. Connected to a big black crystal. CLK -> 1-2V Amplitude (32.768Khz?) || 
|-
| 28 || 12 || {{cellcolors|#ff77bb}} <s>P123/</s>XT1 || XT_SUB || ←I || Subsystem clock. Connected to a big black crystal. CLK -> 1-2V Amplitude (32.768Khz?)  || 
|-
| 29 ||  || {{cellcolors|#aa7744}} FLMD0 || FLASH_MODE || - || Flash programming mode. Connected to pin 8 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode || 3.33
|-
| 30 || 12 || {{cellcolors|#ff77bb}} <s>P122/</s>X2<s>/EXCLK</s> || XT_MAIN || ←I || Main system clock. Connected to a tiny metallic crystal marked "EX" || 0.8v @ standby (1.1)
|-
| 31 || 12 || {{cellcolors|#ff77bb}} <s>P121/</s>X1 || XT_MAIN || ←I || Main system clock. Connected to a tiny metallic crystal marked "EX" || 2.2v @ standby (2.4)
|-
| 32 ||  || {{cellcolors|#ff9933}} REGC || VREG_CAP || - || Capacitor for the internal voltage regulator. Connected to ground through a capacitor (<abbr title="The user manual suggest 0.47 up to 1uF. Meassured onboard results in 1.28uF">around 1uF</abbr>) at the other side of the board. See: [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]]. And 2 diodes to battery+ || 
|-
| 33 ||  || {{cellcolors|#333333|#ffffff}} V<span style="font-size:60%;">SS0</span> || GND || - ||  || 0
|-
| 34 ||  || {{cellcolors|#333333|#ffffff}} EV<span style="font-size:60%;">SS0</span> || GND || - ||  || 0
|-
| 35 ||  || {{cellcolors|#ff3333|#ffffff}} V<span style="font-size:60%;">DD</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]], pin 2 || 3v @ standby (3.3)
|-
| 36 ||  || {{cellcolors|#ff3333|#ffffff}} EV<span style="font-size:60%;">DD0</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]], pin 2 || 3v @ standby (3.3)
|-
| 37 || 6 || P60/SCL0 ||  || ←I/O→ || Primary I2C bus. UNK_I2C_SCL ? (either HDMI, DVE, or MK) || 0.2v @ standby
|-
| 38 || 6 || P61/SDA0 ||  || ←I/O→ || Primary I2C bus. UNK_I2C_SDA ? (either HDMI, DVE, or MK) || 0.2v @ standby
|-
! colspan="7" data-sort-value="38.5"|
|-
| 39 || 6 || P62 ||  || ←I/O→ ||  || 0
|-
| 40 || 6 || {{cellcolors|#c0c0c0}} P63 || P63_DOWN || ←I || 10K resistor to GND || 0
|-
| 41 || 3 || {{cellcolors|#ff9933}} <s>P31/TI03/TO03/</s>INTP4 || ACIN_DET || ←I || Connected to pin 4 of the [[Power Supply|PSU]] control connector. See: [[Media:SYSCON_SWx_JTP-001_JSD-001_HSW-001_CN101.jpg|CECH-25xx/SW2/SwitchBoard/PSU schematic]] || 3v @ standby (3.3)
|-
| 42 || 6 || {{cellcolors|#33cc33|#ffffff}} P64/<span style="text-decoration: overline;">RD</span> ||  || ←I/O→ || Connected (indirectly) to voltage regulator [[Talk:Regulators | BD9684 0906]], pin 4 (enable something) || 0
|-
| 43 || 6 || {{cellcolors|#aa7744}} P65/<span style="text-decoration: overline;">WR0</span> ||  || ←I/O→ || Connected to Pin 12 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode  || 3.0
|-
| 44 || 6 || P66/<span style="text-decoration: overline;">WR1</span> ||  || ←I/O→ ||  || 0
|-
| 45 || 6 || {{cellcolors|#e0e0e0}} <s>P67/ASTB</s> || NOT_CONNECTED || - ||  || 0
|-
| 46 || 7 || P77/EX23/KR7/INTP11 ||  || ←I/O→ ||  || 0
|-
| 47 || 7 || P76/EX22/KR6/INTP10 ||  || ←I/O→ ||  || 3v @ standby (3.15)
|-
| 48 || 7 || P75/EX21/KR5/INTP9 ||  || ←I/O→ ||  || 3v @ standby (3.15)
|-
| 49 || 7 || {{cellcolors|#c0c0c0}} <s>P74/EX20/KR4/</s>INTP8 || INTP8_DOWN || ←I || 10K resistor to GND || 0
|-
| 50 || 7 || {{cellcolors|#aa7744}} P73/EX19/KR3 ||  || ←I/O→ || Connected to pin 3 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]]. And to voltage regulator [[Talk:Regulators | D35653 0S25]] (FLASH_ENABLE ?) || 0
|-
| 51 || 7 || P72/EX18/KR2 ||  || ←I/O→ ||  || 0
|-
| 52 || 7 || {{cellcolors|#33cc33|#ffffff}} P71/EX17/KR1 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators | BD3525]],  pin 12 (enable something) || 0
|-
| 53 || 7 || P70/EX16/KR0 ||  || ←I/O→ ||  || 0
|-
| 54 || 0 || {{cellcolors|#c0c0c0}} P06<s>/<span style="text-decoration: overline;">WAIT</span></s> || P06_DOWN || ←I/O→ || 45K resistor array to GND || 0
|-
| 55 || 0 || {{cellcolors|#c0c0c0}} P05<s>/CLKOUT</s> || P05_DOWN || ←I/O→ || 45K resistor array to GND || 0
|-
| 56 ||  || {{cellcolors|#333333|#ffffff}} EV<span style="font-size:60%;">SS1</span> || GND || - ||  || 0
|-
| 57 ||  || {{cellcolors|#ff3333|#ffffff}} EV<span style="font-size:60%;">DD1</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]], pin 2 || 3v @ standby (3.3)
|- 
| 58 || 8 || P80/EX0 ||  || ←I/O→ ||  || 0
|-
| 59 || 8 || P81/EX1 ||  || ←I/O→ ||  || 0
|-
| 60 || 8 || P82/EX2 ||  || ←I/O→ ||  || 0
|-
| 61 || 8 || P83/EX3 ||  || ←I/O→ ||  || 0
|-
| 62 || 8 || P84/EX4 ||  || ←I/O→ ||  || 0
|-
| 63 || 8 || P85/EX5 ||  || ←I/O→ ||  || 0
|-
| 64 || 8 || P86/EX6 ||  || ←I/O→ ||  || 0
|-
! colspan="7" data-sort-value="64.5"|
|-
| 65 || 8 || P87/EX7 ||  || ←I/O→ ||  || 0
|-
| 66 || 3 || P30/INTP3/RTC1HZ ||  || ←I/O→ || || 0
|-
| 67 || 5 || P50/EX8 ||  || ←I/O→ ||  || 0
|-
| 68 || 5 || P51/EX9 ||  || ←I/O→ ||  || 0
|-
| 69 || 5 || P52/EX10 ||  || ←I/O→ ||  || 0
|-
| 70 || 5 || P53/EX11 ||  || ←I/O→ ||  || 0
|-
| 71 || 5 || P54/EX12 ||  || ←I/O→ ||  || 0
|-
| 72 || 5 || P55/EX13 ||  || ←I/O→ ||  || 0
|-
| 73 || 5 || P56/EX14 ||  || ←I/O→ ||  || 0
|-
| 74 || 5 || P57/EX15 ||  || ←I/O→ ||  || 0
|-
| 75 || 1 || {{cellcolors|#33cc33|#ffffff}} P17/EX31/TI02/TO02 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators | Mitsumi 040 810X]],  pin 5 || 0
|-
| 76 || 1 || P16/EX30/TI01/TO01/INTP5 ||  || ←I/O→ ||  || 3v @ standby (3.15)
|-
| 77 || 1 || P15/EX29/RTCDIV/RTCCL ||  || ←I/O→ ||  || 3v @ standby (3.3)
|-
| 78 || 1 || {{cellcolors|#aa7744}} <s>P14/EX28/</s>RxD3 || SC_RxD || ←I || SC_RxD UART (terminal).Connected to Pin 11 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode, and to pin 6 @ [[PCI]] Connector || 0
|-
| 79 || 1 || {{cellcolors|#aa7744}} <s>P13/EX27/</s>TxD3 || SC_TxD || O→ || SC_TxD UART (terminal).Connected to Pin 10 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode, and to pin 4 @ [[PCI]] Connector || 3.3
|-
| 80 || 1 || <s>P12/EX26/</s>SO00<s>/TxD0</s> || BE_SPI_DO || O→ || SO from Cell Slave to Syscon Master || 0
|-
| 81 || 1 || <s>P11/EX25/</s>SI00<s>/RxD0</s> || BE_SPI_DI || ←I || SI from Syscon Master to Cell Slave || 1.2
|-
| 82 || 1 || <s>P10/EX24/</s><span style="text-decoration: overline;">SCK00</span> || BE_SPI_CLK ? || ←I/O→ || Serial Clock || 0
|-
| 83 || 9 || P90/EX32 || BE_SPI_CS ? || ←I/O→ || Chip Select || 2.0
|-
| 84 || 9 || P91/EX33 ||  || ←I/O→ ||  || 3v @ standby
|-
| 85 || 9 || P92/EX34 ||  || ←I/O→ ||  || 0
|-
| 86 || 9 || P93/EX35 ||  || ←I/O→ ||  || 0
|-
| 87 || 9 || P94 ||  || ←I/O→ || RSX_SPI_CS ? See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad AW8@]] || 0
|-
| 88 || 9 || P95/<span style="text-decoration: overline;">SCK11</span>/SCL11 ||  || ←I/O→ || RSX_SPI_CLK ? See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad AY8@]] || 0
|-
| 89 || 9 || P96/SI11/SDA11 ||  || ←I/O→ || RSX_SPI_DI ? See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad BA7@]] || 0
|-
| 90 || 9 || P97/SO11 ||  || ←I/O→ || RSX_SPI_DO ? See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad BA6@]] || 0
|-
| 91 || 11 || P112 ||  || ←I/O→ ||  || 0
|-
| 92 || 11 || {{cellcolors|#33cc33|#ffffff}} P113 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators | BD3527 (near FLASH)]],  pin 12 || 0
|-
| 93 || 11 || P114 ||  || ←I/O→ ||  || 0
|-
| 94 || 11 || P115 ||  || ←I/O→ ||  || 0
|-
| 95 || 11 || {{cellcolors|#33cc33|#ffffff}} P116 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators | BD3527 (near USB)]],  pin 12 || 0
|-
| 96 || 11 || P117 ||  || ←I/O→ ||  || 0
|-
| 97 ||  || {{cellcolors|#ff3333|#ffffff}} AV<span style="font-size:60%;">REF1</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]], pin 2 || 3v @ standby (3.3)
|-
| 98 || 11 || {{cellcolors|#e0e0e0}} <s>P110/ANO0</s> || NOT_CONNECTED || - ||  || 0
|-
| 99 || 11 || {{cellcolors|#e0e0e0}} <s>P111/ANO1</s> || NOT_CONNECTED || - ||  || 0
|-
| 100 ||  || {{cellcolors|#ff3333|#ffffff}} AV<span style="font-size:60%;">REF0</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]], pin 2 || 3v @ standby (3.3)
|-
| 101 ||  || {{cellcolors|#333333|#ffffff}} AV<span style="font-size:60%;">SS0</span> || GND || - ||  || 0
|-
| 102 || 15 || {{cellcolors|#c0c0c0}} <s>P157/</s>ANI15 || ANI15_DOWN || ←I || 100k resistor to GND. And to a missing SMD component to [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to pin 8 of voltage regulator [[Talk:Regulators|463A]] (3.3_EVER_A) <!-- Interesting, the circuit is designed to pull this pin up or down, is down by default but im wondering what does the pullup o0--> || 0
|-
! colspan="7" data-sort-value="102.5"|
|-
| 103 || 15 || {{cellcolors|#c0c0c0}} <s>P156/</s>ANI14 || ANI14_UP || ←I || [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to 100k resistor to pin 8 of voltage regulator [[Talk:Regulators|463A]] (3.3_EVER_A) || 0
|-
| 104 || 15 || {{cellcolors|#c0c0c0}} <s>P155/</s>ANI13 || ANI13_DOWN || ←I || [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to 100k resistor to GND || 0
|-
| 105 || 15 || {{cellcolors|#e0e0e0}} <s>P154/ANI12</s> || NOT_CONNECTED || - ||  || 0
|-
| 106 || 15 || {{cellcolors|#e0e0e0}} <s>P153/ANI11</s> || NOT_CONNECTED || - ||  || 0
|-
| 107 || 15 || {{cellcolors|#e0e0e0}} <s>P152/ANI10</s> || NOT_CONNECTED || - ||  || 0
|-
| 108 || 15 || {{cellcolors|#e0e0e0}} <s>P151/ANI9</s> || NOT_CONNECTED || - ||  || 0
|-
| 109 || 15 || {{cellcolors|#c0c0c0}} <s>P150/</s>ANI8 || ANI8_UP_UNK || ←I || Connected to an unknown track. And to 10k resistor to [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to pin 8 of voltage regulator [[Talk:Regulators|463A]] (3.3_EVER_A) || 3v @ standby
|-
| 110 || 2 || {{cellcolors|#d699ff}} <s>P27/</s>ANI7 || POW_SW_DET || ←I || Power switch detect. Connected to [[switch boards|Switch board]] || 3v @ standby (3.3) 3.3
|-
| 111 || 2 || {{cellcolors|#d699ff}} <s>P26/</s>ANI6 || EJECT_SW_DET || ←I || Eject switch detect. Connected to [[switch boards|Switch board]] || 3v @ standby (3.3) 3.3
|-
| 112 || 2 || P25/ANI5 ||  || ←I/O→ || Connected to Wifi/BT module, unknown pad || 0
|-
| 113 || 2 || P24/ANI4 ||  || ←I/O→ || Connected to Wifi/BT module, unknown pad || 0
|-
| 114 || 2 || P23/ANI3 ||  || ←I/O→ ||  || 0
|-
| 115 || 2 || P22/ANI2 ||  || ←I/O→ ||  || 0
|-
| 116 || 2 || P21/ANI1 ||  || ←I/O→ ||  || 0
|-
| 117 || 2 || P20/ANI0 ||  || ←I/O→ ||  || (0V?)
|-
| 118 || 13 || {{cellcolors|#ff9933}} P130 || ACDC_STBY || O→ || Connected to pin 3 of the [[Power Supply|PSU]] control connector. See: [[Media:SYSCON_SWx_JTP-001_JSD-001_HSW-001_CN101.jpg|CECH-25xx/SW2/SwitchBoard/PSU schematic]] || 3v @ standby (3.3)
|-
| 119 || 13 || {{cellcolors|#33cc33|#ffffff}} P131/TI06/TO06 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators|348A]], pins 2 and 7 (EN_HDMI & EN_AV together ?... in other words, enable video output) || 3v @ standby (3.3)
|-
| 120 || 0 || P07 ||  || ←I/O→ ||  || 0
|-
| 121 || 0 || P04/<span style="text-decoration: overline;">SCK10</span>/SCL10 ||  || ←I/O→ ||  || 0
|-
| 122 || 0 || P03/SI10/RxD1/SDA10 ||  || ←I/O→ ||  || 0
|-
| 123 || 0 || P02/SO10/TxD1 ||  || ←I/O→ ||  || 0
|-
| 124 || 0 || P01/TO00 ||  || ←I/O→ || Connected to pin93 @Panasonic [[MN8647091]] || 0
|-
| 125 || 0 || P00/TI00 ||  || ←I/O→ ||  || 0
|-
| 126 || 14 || {{cellcolors|#123456|#ffffff}} <s>P145/TI07/</s>TO07 || FAN_PWM || O→ || PWM Control for the Fan. || 0
|-
| 127 || 14 || P144/SO20/TxD2 ||  || ←I/O→ || (HDMI controller CEC data channel related with pins 1 and 128 ?) || 0
|-
| 128 || 14 || P143/SI20/RxD2/SDA20 ||  || ←I/O→ || Connected to pin29 @Panasonic [[MN8647091]] (HDMI controller CEC data channel related with pins 1 and 127 ?) || 0
|}<includeonly></div></includeonly><noinclude>[[Category:Templates]]</noinclude>