Editing Template:Syscon pinout LQFP 128 pins

{|class="wikitable"
! rowspan="2" | Pin # !! colspan="2" | Name !! rowspan="2" | Type !! rowspan="2" | Description !! rowspan="2" | STBY Voltages
|-
! <abbr title="NEC/Renesas optional pin configuration">NEC/Renesas</abbr> !! Sony/Custom
|-
| 1 || P142/<span style="text-decoration: overline;">SCK20</span>/SCL20  ||  || ←I || Connected to pin27 @Panasonic [[MN8647091]] (HDMI controller CEC data channel related with pins 127 and 128 ?) || 0
|-
| 2 || P141/PCLBUZ1/INTP7 || SB_INT/SYSCSINT || ←I/O→ || Connected to pinD1@SB through the resistor || ~1V @ standby (0 V?)
|-
| 3 || P140/PCLBUZ0/INTP6 || BE_INT/ATTENTION || ←I/O→ || Connected to pinBA17@BE through the NPN transistor || 3V @ standby (3.15V)
|-
| 4 || P120/INTP0/EXLVI ||  || ←I/O→ || To +12V_MAIN through the resistor and divider || 0
|-
| 5 || P37 || POW_LED || O→ || Connected to dual led(Green) on [[switch boards | switch board]] through the dual digital NPN trans. EMH1(SOT-563) || 0
|-
| 6 || P36 || STBY_LED || O→ || Connected to dual led(Red) on [[switch boards | switch board]] through the dual digital NPN trans. EMH1(SOT-563) || 3v @ standby (3.3V)
|-
| 7 || P35 ||  || ←I/O→ || Connected to pinAA18@SB || 0
|-
| 8 || P34 ||  || ←I/O→ || Connected to pinAA17@SB || 0
|-
| 9 || P33 ||  || ←I/O→ || CELL BE related? || 0
|-
| 10 || P32 ||  || ←I/O→ ||  || 0
|-
| 11 || <s>P163/TI13/</s>TO13 || BACK_LEDS || O→ || Connected to Backlit LEDs on [[switch boards | switch board]] || 0
|-
| 12 || <s>P162/TI12/</s>TO12 || CONTOUR_LEDS || O→ || Connected to CONTOUR LEDs on [[switch boards | switch board]] || 0
|-
| 13 || P161/TI11/TO11 ||  || ←I/O→ || Absent element between this line and GND. Nothing else.   || 0
|-
| 14 || P160/TI10/TO10 ||  || ←I/O→ || || 0
|-
| 15 || P47/INTP2 ||  || ←I/O→ ||  || 0
|-
| 16 || <s>P46/INTP1/TI05/</s>TO05 || BUZZER || O→ ||  || 0
|-
| 17 || P45/SO01 ||  || ←I/O→ ||  || 0
|-
| 18 || P44/SI01 ||  || ←I/O→ ||  || 3v @ standby
|-
| 19 || P43/<span style="text-decoration: overline;">SCK01</span> ||  || ←I/O→ ||  || 0
|-
| 20 || P42/TI04/TO04 ||  || ←I/O→ ||  || 0
|-
| 21 || P41/TOOL1 || Debugger Pin? || ←I/O→ || Connected to Pin 13 @ Service Connector through a missing SMD component resistor/diode || 3.0
|-
| 22 || P40/TOOL0 || Debugger Pin? || ←I/O→ || Connected to Pin 7 @ Service Connector through a missing SMD component resistor/diode || 0
|-
| 23 || P127/SO21 ||  || ←I/O→ ||  || 0
|-
| 24 || <s>P126/SI21/</s>SDA21 || THR_I2C_SDA || ←I/O→ || Connected to pin 7 of CELL/RSX [[Thermal | temperature monitor IC's]] (SMbus I2C shared data line) || 3v @ standby (3.15)
|-
| 25 || <s>P125/SCK21/</s>SCL21 || THR_I2C_SCL || O→ || Connected to pin 8 of CELL/RSX [[Thermal | temperature monitor IC's]] (SMbus I2C shared clock line) || 3v @ standby (3.15)
|-
| 26 || <span style="text-decoration: overline;">RESET</span> || Debugger Pin? || ←I || Connected to Pin 9 @ Service Connector through a missing SMD component resistor/diode. And to standby voltage regulator [[Talk:Regulators | 463A]], pin 3 || 
|-
| 27 || <s>P124/</s>XT2 || XTL_MAIN ? || ←I || Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?) || 
|-
| 28 || <s>P123/</s>XT1 || XTL_MAIN ? || ←I || Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?)  || 
|-
| 29 || FLMD0 || Debugger Pin? || - || Connected to pin 8 @ Service Connector through a missing SMD component resistor/diode || 3.33
|-
| 30 || <s>P122/</s>X2<s>/EXCLK</s> || XTL_SECOND ? || ←I || Connected to a small external oscilator 2 ? || 0.8v @ standby (1.1)
|-
| 31 || <s>P121/</s>X1 || XTL_SECOND ? || ←I || Connected to a small external oscilator 2 ? || 2.2v @ standby (2.4)
|-
| 32 || REGC ||  || ←I/O→ ||  || 
|-
| 33 || V<span style="font-size:60%;">SS0</span> || GND || - ||  || 0
|-
| 34 || EV<span style="font-size:60%;">SS0</span> || GND || - ||  || 0
|-
| 35 || V<span style="font-size:60%;">DD</span> || 3.3_EVER_B || - || Connected to voltage regulator [[Talk:Regulators | 463A]], pin 2 || 3v @ standby (3.3)
|-
| 36 || EV<span style="font-size:60%;">DD0</span> || 3.3_EVER_B || - || Connected to voltage regulator [[Talk:Regulators | 463A]], pin 2 || 3v @ standby (3.3)
|-
| 37 || P60/SCL0 ||  || ←I/O→ ||  || 0.2v @ standby
|-
| 38 || P61/SDA0 ||  || ←I/O→ ||  || 0.2v @ standby
|-
! colspan="6" | 
|-
| 39 || P62 ||  || ←I/O→ ||  || 0
|-
| 40 || P63 ||  || ←I/O→ ||  || 0
|-
| 41 || P31/TI03/TO03/INTP4 || ACIN_DET || ←I || Connected to pin 4 of the [[Power Supply|PSU]] control connector. See: [[Media:SYSCON_SWx_JTP-001_JSD-001_HSW-001_CN101.jpg|CECH-25xx/SW2/SwitchBoard/PSU schematic]] || 3v @ standby (3.3)
|-
| 42 || P64/<span style="text-decoration: overline;">RD</span> ||  || ←I/O→ || Connected (indirectly) to voltage regulator [[Talk:Regulators | BD9684 0906]], pin 4 (enable something) || 0
|-
| 43 || P65/<span style="text-decoration: overline;">WR0</span> ||  || ←I/O→ || Connected to Pin 12 @ Service Connector through a missing SMD component resistor/diode  || 3.0
|-
| 44 || P66/<span style="text-decoration: overline;">WR1</span> ||  || ←I/O→ ||  || 0
|-
| 45 || P67/ASTB ||  || ←I/O→ ||  || 0
|-
| 46 || P77/EX23/KR7/INTP11 ||  || ←I/O→ ||  || 0
|-
| 47 || P76/EX22/KR6/INTP10 ||  || ←I/O→ ||  || 3v @ standby (3.15)
|-
| 48 || P75/EX21/KR5/INTP9 ||  || ←I/O→ ||  || 3v @ standby (3.15)
|-
| 49 || P74/EX20/KR4/INTP8 ||  || ←I/O→ ||  || 0
|-
| 50 || P73/EX19/KR3 ||  || ←I/O→ || Connected to pin 3 @ Service Connector. And to voltage regulator [[Talk:Regulators | D35653 0S25]] (FLASH_ENABLE ?) || 0
|-
| 51 || P72/EX18/KR2 ||  || ←I/O→ ||  || 0
|-
| 52 || P71/EX17/KR1 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators | BD3525]],  pin 12 (enable something) || 0
|-
| 53 || P70/EX16/KR0 ||  || ←I/O→ ||  || 0
|-
| 54 || P06/<span style="text-decoration: overline;">WAIT</span> ||  || ←I/O→ ||  || 0
|-
| 55 || P05/CLKOUT ||  || ←I/O→ ||  || 0
|-
| 56 || EV<span style="font-size:60%;">SS1</span> || GND || - ||  || 0
|-
| 57 || EV<span style="font-size:60%;">DD1</span> || 3.3_EVER_B || - || Connected to voltage regulator [[Talk:Regulators | 463A]], pin 2 || 3v @ standby (3.3)
|- 
| 58 || P80/EX0 ||  || ←I/O→ ||  || 0
|-
| 59 || P81/EX1 ||  || ←I/O→ ||  || 0
|-
| 60 || P82/EX2 ||  || ←I/O→ ||  || 0
|-
| 61 || P83/EX3 ||  || ←I/O→ ||  || 0
|-
| 62 || P84/EX4 ||  || ←I/O→ ||  || 0
|-
| 63 || P85/EX5 ||  || ←I/O→ ||  || 0
|-
| 64 || P86/EX6 ||  || ←I/O→ ||  || 0
|-
! colspan="6" | 
|-
| 65 || P87/EX7 ||  || ←I/O→ ||  || 0
|-
| 66 || P30/INTP3/RTC1HZ ||  || ←I/O→ || || 0
|-
| 67 || P50/EX8 ||  || ←I/O→ ||  || 0
|-
| 68 || P51/EX9 ||  || ←I/O→ ||  || 0
|-
| 69 || P52/EX10 ||  || ←I/O→ ||  || 0
|-
| 70 || P53/EX11 ||  || ←I/O→ ||  || 0
|-
| 71 || P54/EX12 ||  || ←I/O→ ||  || 0
|-
| 72 || P55/EX13 ||  || ←I/O→ ||  || 0
|-
| 73 || P56/EX14 ||  || ←I/O→ ||  || 0
|-
| 74 || P57/EX15 ||  || ←I/O→ ||  || 0
|-
| 75 || P17/EX31/TI02/TO02 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators | Mitsumi 040 810X]],  pin 5 || 0
|-
| 76 || P16/EX30/TI01/TO01/INTP5 ||  || ←I/O→ ||  || 3v @ standby (3.15)
|-
| 77 || P15/EX29/RTCDIV/RTCCL ||  || ←I/O→ ||  || 3v @ standby (3.3)
|-
| 78 || <s>P14/EX28/</s>RxD3 || SC_RxD || ←I || SC_RxD UART (terminal).Connected to Pin 11 @ Service Connector through a missing SMD component resistor/diode, and to pin 6 @ [[PCI]] Connector || 0
|-
| 79 || <s>P13/EX27/</s>TxD3 || SC_TxD || O→ || SC_TxD UART (terminal).Connected to Pin 10 @ Service Connector through a missing SMD component resistor/diode, and to pin 4 @ [[PCI]] Connector || 3.3
|-
| 80 || <s>P12/EX26/</s>SO00<s>/TxD0</s> || BE_SPI_DO || O→ || SO from Cell Slave to Syscon Master || 0
|-
| 81 || <s>P11/EX25/</s>SI00<s>/RxD0</s> || BE_SPI_DI || ←I || SI from Syscon Master to Cell Slave || 1.2
|-
| 82 || <s>P10/EX24/</s><span style="text-decoration: overline;">SCK00</span> || BE_SPI_CLK ? || ←I/O→ || Serial Clock || 0
|-
| 83 || P90/EX32 || BE_SPI_CS ? || ←I/O→ || Chip Select || 2.0
|-
| 84 || P91/EX33 ||  || ←I/O→ ||  || 3v @ standby
|-
| 85 || P92/EX34 ||  || ←I/O→ ||  || 0
|-
| 86 || P93/EX35 ||  || ←I/O→ ||  || 0
|-
| 87 || P94 ||  || ←I/O→ ||  || 0
|-
| 88 || P95/<span style="text-decoration: overline;">SCK11</span>/SCL11 ||  || ←I/O→ || RSX_SPI_CLK ? || 0
|-
| 89 || P96/SI11/SDA11 ||  || ←I/O→ || RSX_SPI_DI ? || 0
|-
| 90 || P97/SO11 ||  || ←I/O→ || RSX_SPI_DO ? || 0
|-
| 91 || P112 ||  || ←I/O→ ||  || 0
|-
| 92 || P113 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators | BD3527 (near FLASH)]],  pin 12 || 0
|-
| 93 || P114 ||  || ←I/O→ ||  || 0
|-
| 94 || P115 ||  || ←I/O→ ||  || 0
|-
| 95 || P116 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators | BD3527 (near USB)]],  pin 12 || 0
|-
| 96 || P117 ||  || ←I/O→ ||  || 0
|-
| 97 || AV<span style="font-size:60%;">REF1</span> || 3.3_EVER_B || - || Connected to voltage regulator [[Talk:Regulators | 463A]], pin 2 || 3v @ standby (3.3)
|-
| 98 || P110/ANO0 ||  || ←I/O→ ||  || 0
|-
| 99 || P111/ANO1 ||  || ←I/O→ ||  || 0
|-
| 100 || AV<span style="font-size:60%;">REF0</span> || 3.3_EVER_B || - || Connected to voltage regulator [[Talk:Regulators | 463A]], pin 2 || 3v @ standby (3.3)
|-
| 101 || AV<span style="font-size:60%;">SS0</span> || GND || - ||  || 0
|-
| 102 || P157/ANI15 ||  || ←I/O→ ||  || 0
|-
! colspan="6" | 
|-
| 103 || P156/ANI14 ||  || ←I/O→ ||  || 0
|-
| 104 || P155/ANI13 ||  || ←I/O→ ||  || 0
|-
| 105 || P154/ANI12 ||  || ←I/O→ ||  || 0
|-
| 106 || P153/ANI11 ||  || ←I/O→ ||  || 0
|-
| 107 || P152/ANI10 ||  || ←I/O→ ||  || 0
|-
| 108 || P151/ANI9 ||  || ←I/O→ ||  || 0
|-
| 109 || P150/ANI8 ||  || ←I/O→ ||  || 3v @ standby
|-
| 110 || P27/ANI7 || POW_SW_DET || ←I || Power switch detect. Connected to [[switch boards | switch board]] || 3v @ standby (3.3) 3.3
|-
| 111 || P26/ANI6 || EJECT_SW_DET || ←I || Eject switch detect. Connected to [[switch boards | switch board]] || 3v @ standby (3.3) 3.3
|-
| 112 || P25/ANI5 ||  || ←I/O→ ||  || 0
|-
| 113 || P24/ANI4 ||  || ←I/O→ ||  || 0
|-
| 114 || P23/ANI3 ||  || ←I/O→ ||  || 0
|-
| 115 || P22/ANI2 ||  || ←I/O→ ||  || 0
|-
| 116 || P21/ANI1 ||  || ←I/O→ ||  || 0
|-
| 117 || P20/ANI0 ||  || ←I/O→ ||  || (0V?)
|-
| 118 || P130 || ACDC_STBY || O→ || Connected to pin 3 of the [[Power Supply|PSU]] control connector. See: [[Media:SYSCON_SWx_JTP-001_JSD-001_HSW-001_CN101.jpg|CECH-25xx/SW2/SwitchBoard/PSU schematic]] || 3v @ standby (3.3)
|-
| 119 || P131/TI06/TO06 ||  || ←I/O→ || Connected to voltage regulator [[Talk:Regulators|348A]], pins 2 and 7 (EN_HDMI & EN_AV together ?... in other words, enable video output) || 3v @ standby (3.3)
|-
| 120 || P07 ||  || ←I/O→ ||  || 0
|-
| 121 || P04/<span style="text-decoration: overline;">SCK10</span>/SCL10 ||  || ←I/O→ || SB_SPI_CLK ? || 0
|-
| 122 || P03/SI10/RxD1/SDA10 ||  || ←I/O→ || SB_SPI_DI ? || 0
|-
| 123 || P02/SO10/TxD1 ||  || ←I/O→ || SB_SPI_DO ? || 0
|-
| 124 || P01/TO00 ||  || ←I/O→ || Connected to pin93 @Panasonic [[MN8647091]] || 0
|-
| 125 || P00/TI00 ||  || ←I/O→ ||  || 0
|-
| 126 || <s>P145/TI07/</s>TO07 || FAN_PWM || O→ || PWM Control for the Fan. || 0
|-
| 127 || P144/SO20/TxD2 ||  || ←I/O→ || (HDMI controller CEC data channel related with pins 1 and 128 ?) || 0
|-
| 128 || P143/SI20/RxD2/SDA20 ||  || ←I/O→ || Connected to pin29 @Panasonic [[MN8647091]] (HDMI controller CEC data channel related with pins 1 and 127 ?) || 0
|}<noinclude>[[Category:Templates]]</noinclude>