Editing Template:HSW-001 pinout

{| class="wikitable"
|+HSW-001 Pinout {{ed right|HSW-001 pinout}}
! rowspan="2" | Pin !! colspan="2" | Signal/Connected to !! rowspan="2" | Description
|-
! On Motherboard<!--// <BR />(Syscon [[SW2-30x]] pins)  //-->  !! On Switch board
|-{{cellcolors|grey|#ffffff}}
| 1 || pin12 @ Syscon [[SW2-30x]] || 4x CONTOUR LEDs || On Switch board is connected to a transistor driving 2 LEDs with currentlimitor resistors of 3K {{ohm}} (red led at left-top) and 820 {{ohm}} (blue led at left-bottom)
|-{{cellcolors|#cc3333|#ffffff}}
| 2 || pin1 @ CN101 [[Power Supply]] || VCC || +5V Standby line from power supply connector CN101, the pin named 5V_EVER on motherboard and 5VSB on power supply
|-
| 3 || pin11 @ Syscon [[SW2-30x]] || 4x WHITE LEDs, ground pins || Inner light for power and eject switches, power LEDs with a currentlimitor resistor of 1K {{ohm}}, and eject LEDs with a currentlimitor resistor of 910 {{ohm}}
|-{{cellcolors|#333333|#ffffff}}
| 4 || GND || GND || Ground
|-
| 5 || pin111 @ Syscon [[SW2-30x]] || EJECT switch || Sink to ground to activate
|-
| 6 || pin110 @ Syscon [[SW2-30x]] || POWER switch || Sink to ground to activate
|-
| 7 || pin5 @ Syscon [[SW2-30x]] || GREEN led, ground pin || Connects to left-bottom corner pin (green gnd) of dual red/green LED over power switch, with a currentlimitor resistor of 1K {{ohm}}
|-
| 8 || pin6 @ Syscon [[SW2-30x]] || RED led, ground pin || Connects to left-top corner pin (red gnd) of dual red/green LED over power switch, with a currentlimitor resistor of 1K2 {{ohm}}
|-
| 9 || pin 36 @ BD controller [[CXD5131R-1]] || BLUE led, ground pin || Connects to blue LED over eject switch, with a currentlimitor resistor of 560 {{ohm}}
|-{{cellcolors|#333333|#ffffff}}
| 10 || GND || GND || Ground
|-
|}
<noinclude>[[Category:Templates]]</noinclude>