Move Navigation Controller
(Redirected from CECH-ZCS1)
Jump to navigation
Jump to search
[edit | edit source]
CECH-ZCS1 (CECH-ZCS1U, CECH-ZCS1E, CECH-ZCS1J, CECH-ZCS1H, CECH-ZCS1M)
FCC ID: AK8CECHZCS1
MIC listing: 007WWCUL0492 April 5, 2010 (CECH-ZCS1J)
Anatel: 2064106223 30/07/2014 (CECH-ZCS1M)
Toshiba T6UN6EFG[edit | edit source]
| Pin # | Name | Port | Description |
|---|---|---|---|
| 1 | GND | To ground | |
| 2 | V_STBY | 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM,  , and LED's
| |
| 3 | GND | To ground | |
| 4 | V_BATT | 2x Capacitor network to ground, and resistor to battery and Texas Instruments SN89062 pin 16 in VX4 boards | |
| 5 | V_STBY | 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, , and LED's
| |
| 6 | SENSOR_ACCL_X | To acccelerometer X axis through resistor | |
| 7 | SENSOR_ACCL_Y | To acccelerometer Y axis through resistor | |
| 8 | SENSOR_ACCL_Z | To acccelerometer Z axis through resistor | |
| 9 | SENSOR_GYRO | To gyroscope through resistor | |
| 10 | V_STBY | 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, , and LED's
| |
| 11 | SLAVES_RESET | Texas Instruments SN84001 pin 2, and ALPS 413A pin 5 through resistor network in VX4 boards | |
| 12 | GND | To ground | |
| 13 | BT_POWER_CTRL ? | Texas Instruments SN89062, pin 4 in VX4 boards | |
| 14 | BT_UART_1 ? | To BT module (ALPS 413A pin 8 in VX4 boards) through resistor | |
| 15 | BT_UART_2 ? | To BT module (ALPS 413A pin 6 in VX4 boards) through 4x resistor network | |
| 16 | BT_UART_3 ? | To BT module (ALPS 413A pin 9 in VX4 boards) through 4x resistor network | |
| 17 | BT_UART_4 ? | To BT module (ALPS 413A pin 7 in VX4 boards) | |
| 18 | BT_UNK_1 | To BT module (ALPS 413A pin 14 in VX4 boards) | |
| 19 | BT_UNK_2 | To BT module (ALPS 413A pin 28 in VX4 boards) | |
| 20 | GND | To ground | |
| 21 | V_STBY | 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, , and LED's
| |
| 22 | GND | To ground | |
| 23 | LED_1 | To led 1 cathode through 4x resistor network (RN3 in VX4 boards) | |
| 24 | LED_2 | To led 2 cathode through 4x resistor network (RN3 in VX4 boards) | |
| 25 | LED_3 | To led 3 cathode through 4x resistor network (RN3 in VX4 boards) | |
| 26 | LED_4 | To led 4 cathode through 4x resistor network (RN3 in VX4 boards) | |
| 27 | Not connected ? (for the PS button backlight led in prototypes ?) | ||
| 28 | MOTOR_SMALL | Small Motor + (rumble) | |
| 29 | MOTOR_BIG | Big Motor + (rumble) | |
| 30 | EEPROM_SPI_CLOCK | EEPROM, pin 6 in VX4 boards | |
| 31 | EEPROM_SELECT | EEPROM, pin 1 in VX4 boards | |
| 32 | GND | To ground | |
| 33 | V_STBY | 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, , and LED's
| |
| 34 | EEPROM_SPI_MOSI | EEPROM, pin 5 in VX4 boards | |
| 35 | EEPROM_SPI_MISO | EEPROM, pin 2 in VX4 boards | |
| 36 | STICKS_POWER_CTRL ? | Texas Instruments SN89062, pin 17 in VX4 boards | |
| 37 | LX_V ? | 4x Resistor network (RN8 in VX4 boards), and then 2x Capacitor network to ground (CN9 in VX4 boards), and to Texas Instruments SN84001 pin 21 in VX4 boards | |
| 38 | LY_V ? | 4x Resistor network (RN8 in VX4 boards), and then 2x Capacitor network to ground (CN9 in VX4 boards), and to Texas Instruments SN84001 pin 20 in VX4 boards | |
| 39 | RX_V ? | 4x Resistor network (RN8 in VX4 boards), and then 2x Capacitor network to ground (CN10 in VX4 boards), and to Texas Instruments SN84001 pin 19 in VX4 boards | |
| 40 | RY_V ? | 4x Resistor network (RN8 in VX4 boards), and then 2x Capacitor network to ground (CN10 in VX4 boards), and to Texas Instruments SN84001 pin 18 in VX4 boards | |
| 41 | BATT_CHARGE_SETPOINT | Texas Instruments SN89062, pin 21 in VX4 boards | |
| 42 | BATT_USB_POWER_GOOD ? | Texas Instruments SN89062, pin 5 in VX4 boards | |
| 43 | BATT_CHARGE_START ? | Texas Instruments SN89062, pin 2 in VX4 boards | |
| 44 | BATT_STATUS_1 ? | Texas Instruments SN89062, pin 10 in VX4 boards (and TP8 in VX4 boards) | |
| 45 | BATT_STATUS_2 ? | Texas Instruments SN89062, pin 12 in VX4 boards (and TP9 in VX4 boards) | |
| 46 | COM_3 | COM 3 (Common Line for Digital     ))
| |
| 47 | BUTTON_ANALOG_UP | 
| |
| 48 | BUTTON_ANALOG_RIGHT | 
| |
| 49 | BUTTON_ANALOG_DOWN | 
| |
| 50 | BUTTON_ANALOG_LEFT | 
| |
| 51 | V_STBY | 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, , and LED's
| |
| 52 | GND | To ground | |
| 53 | BUTTON_ANALOG_L2 | 
| |
| 54 | BUTTON_ANALOG_L1 | 
| |
| 55 | Not connected ? (connected to something in PP1 and PP4 boards) | ||
| 56 | BUTTON_ANALOG_R2 | 
| |
| 57 | BUTTON_ANALOG_R1 | 
| |
| 58 | BUTTON_ANALOG_TRIANGLE | 
| |
| 59 | BUTTON_ANALOG_CIRCLE | 
| |
| 60 | BUTTON_ANALOG_CROSS | 
| |
| 61 | BUTTON_ANALOG_SQUARE | 
| |
| 62 | Not connected ? (connected to something in PP1 and PP4 boards) | ||
| 63 | Not connected ? (connected to something in PP1 and PP4 boards) | ||
| 64 | BUTTON_DIGITAL_SELECT |
| |
| 65 | BUTTON_DIGITAL_L3 |
| |
| 66 | BUTTON_DIGITAL_R3 |
| |
| 67 | BUTTON_DIGITAL_START |
| |
| 68 | BUTTON_DIGITAL_PLAYSTATION |
| |
| 69 | To a testpoint (TP23 in VX4 boards), and 8.45K resistor to pin 74 | ||
| 70 | GND | To ground. It seems these pins were repurposed at some point | |
| 71 | GND | ||
| 72 | GND | ||
| 73 | V_STBY | 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, , and LED's
| |
| 74 | 2x Capacitor network to ground, and NTC thermistor to standby power rail, and 8.45K resistor to pin 69 | ||
| 75 | COM_1 | 2x Capacitor network to ground, and to ribbon circuit board COM 1 pin (Common Line for Analog )
| |
| 76 | COM_2 | 2x Capacitor network to ground, and to ribbon circuit board COM 2 pin (Common Line for Analog )
| |
| 77 | LX |  2x Capacitor network to ground, and to Texas Instruments SN84001 pin 25 in VX4 boards
| |
| 78 | LY |  2x Capacitor network to ground, and to Texas Instruments SN84001 pin 24 in VX4 boards
| |
| 79 | RX |  2x Capacitor network to ground, and to Texas Instruments SN84001 pin 23 in VX4 boards
| |
| 80 | RY |  2x Capacitor network to ground, and to Texas Instruments SN84001 pin 22 in VX4 boards
|
ALPS 413A (Bluetooth)[edit | edit source]
Texas Instruments B029A (Li-Ion charge controller? / regulator?)[edit | edit source]
B029A 06T G4 AGH0
alt.no.: 8029A 04TC4 C6CK?
20pin
VHC 20 E0 23[edit | edit source]
alt.no.: VKC 20 4021?
14pin
Mackie (MCU)[edit | edit source]
80pin MCU
? (EEPROM ?)[edit | edit source]
8pin
Li-Ion (Accupack)[edit | edit source]
3.7V
| |||||||||||||
