Revision as of 22:42, 3 March 2021

Gallery

Component	Package
APU	CXD90026G
APU RAM	K4G41325FC-HC03
Southbridge	CXD90025G
Southbridge RAM	K4B2G1646E-BCK0
Serial Flash	MX25L25635FMI-10G
Syscon	A01-C0L
SATA	MB86C311B
HDMI	MN86471A
LAN	88EC060-NN82
Wireless communication module	88W8797
BD-ROM	R8J32841FP1
USB 3.0 Hub	GL3520

APU to MC link is PCI-e Gen2 (5Gbit/s, 4 lanes)
APU to BD-ROM is SATA I (1.5 Gbit/s)
DDR3 bootup speed is 400MHz (DDR3-800, that is very low because DDR3 chip is rated for DDR3-1600). Not sure if DDR3 would go higher on fully booted unit).
unit denies to boot if I cut some of PCI-e lanes. Normally, x4 PCI-e interface would work on x1 lane without any problem (with lower bandwidth), but PS4 LED flashes blue forever if I cut PCI-e down to 1 lane.

@@ Line 1: / Line 1: @@
-{{Wikify}}
+* Seen in [[CUH-10xx series]]
-== SKU differentiation ==
-* [[CUH-10xx series]] contain [[SAA-001]] board.
 * Productcode: 1-889-352-11 or 1-889-352-21
-=== Gallery ===
+= Gallery =
 <gallery>
@@ Line 37: / Line 33: @@
 </gallery>
-== Components ==
+= Components =
 {| class="wikitable sortable"
@@ Line 68: / Line 64: @@
 |}
-=== Notes on components ===
+== Notes on components ==
-<SoC> Some extra info:
+* APU to MC link is PCI-e Gen2 (5Gbit/s, 4 lanes)
-* APU to MC link is indeed PCI-e Gen2 (5Gbit/s, 4 lanes)
 * APU to BD-ROM is SATA I (1.5 Gbit/s)
-* DDR3 bootup speed is 400MHz (DDR3-800, that's very low because DDR chip is rated for DDR3-1600). Not sure if DDR3 would go higher on fully booted unit).
+* DDR3 bootup speed is 400MHz (DDR3-800, that is very low because DDR3 chip is rated for DDR3-1600). Not sure if DDR3 would go higher on fully booted unit).
-* unit denies to boot if I cut some of PCI-e lanes. Normally, x4 PCI-e interface would work on x1 lane w/o problems (with lower bandwidth), but PS4 flashes blue forever if I cut PCI-e down to 1 lane.
+* unit denies to boot if I cut some of PCI-e lanes. Normally, x4 PCI-e interface would work on x1 lane without any problem (with lower bandwidth), but PS4 LED flashes blue forever if I cut PCI-e down to 1 lane.
 {{Components}}
 <noinclude>[[Category:Main]]</noinclude>