SAA-001: Difference between revisions

From PS4 Developer wiki
Jump to navigation Jump to search
No edit summary
 
(11 intermediate revisions by 4 users not shown)
Line 1: Line 1:
{{Wikify}}
* Seen in [[CUH-10xx series]]
This needs a clean board image without colored boxes, annotation - if possible in highres
* Productcode: 1-889-352-11 or 1-889-352-21


== SKU differentiation ==
= Gallery =
* [[CUH-1000A]] contains [[SAA-001]] board


productcode: 1-889-352-11 or 1-889-352-21
=== Gallery ===
<gallery>
<gallery>
File:SAA-001 - componentside.jpg|SAA-001 - componentside
File:SAA001-backside.jpg|[[SAA-001]] - backside
File:SAA-001 - backside.jpg|SAA-001 - backside
File:SAA-001-componentside.jpg|[[SAA-001]] - componentside
File:PS4 Motherboard SAA-001 - lr 4.png|PS4 Motherboard SAA-001 - main component side
File:SAA-001 - componentside.jpg|[[SAA-001]] - componentside
File:PS4 Motherboard SAA-001 - lr 3.png|PS4 Motherboard SAA-01 - back side
File:SAA-001 - backside.jpg|[[SAA-001]] - backside
File:SAA-001 componentside - wm.jpg|SAA-001 componentside - wm
File:PS4 Motherboard SAA-001 - lr 4.png|PS4 Motherboard [[SAA-001]] - main component side
File:SAA-001 backside - wm.jpg|SAA-001 backside - wm
File:PS4 Motherboard SAA-001 - lr 3.png|PS4 Motherboard [[SAA-001]] - back side
File:SAA-001 componentside - wm.jpg|[[SAA-001]] componentside - wm
File:SAA-001 backside - wm.jpg|[[SAA-001]] backside - wm
</gallery>
</gallery>


Line 28: Line 26:
File:SAA-001 - Backside - IMG 2992.JPG|[[SAA-001]] backside - image2992
File:SAA-001 - Backside - IMG 2992.JPG|[[SAA-001]] backside - image2992
File:SAA-001 - Backside - IMG 2993.JPG|[[SAA-001]] backside - image2993
File:SAA-001 - Backside - IMG 2993.JPG|[[SAA-001]] backside - image2993
File:SAA-001 - Backside - IMG 2994.JPG|[[SAA-001]] backside - image2994
File:SAA-001 - Backside - IMG 2993.JPG|[[SAA-001]] backside - image2994
File:SAA-001 - Backside - IMG 2995.JPG|[[SAA-001]] backside - image2995
File:SAA-001 - Backside - IMG 2995.JPG|[[SAA-001]] backside - image2995
File:SAA-001 - Backside - IMG 2996.JPG|[[SAA-001]] backside - image2996
File:SAA-001 - Backside - IMG 2996.JPG|[[SAA-001]] backside - image2996
Line 34: Line 32:
File:SAA-001 - Backside - IMG 2998.JPG|[[SAA-001]] backside - image2998
File:SAA-001 - Backside - IMG 2998.JPG|[[SAA-001]] backside - image2998
</gallery>
</gallery>
= Components =
{| class="wikitable sortable"
|-
! Component !! Package
|-
| APU || [[CXD90026G]]
|-
| APU RAM || [[K4G41325FC-HC03]]
|-
| Southbridge || [[CXD90025G]]
|-
| Southbridge RAM || [[K4B2G1646E-BCK0]]
|-
| Serial Flash || [[MX25L25635FMI-10G]]
|-
| Syscon || [[A01-COL]]
|-
| SATA || [[MB86C311B]]
|-
| HDMI || [[MN86471A]]
|-
| LAN || [[88EC060-NN82]]
|-
| Wireless communication module || [[88W8797]]
|-
| BD-ROM || [[R8J32841FP1]]
|-
| USB 3.0 Hub || [[GL3520]]
|}
== Notes on components ==
* APU to MC link is PCI-e Gen2 (5Gbit/s, 4 lanes)
* APU to BD-ROM is SATA I (1.5 Gbit/s)
* DDR3 bootup speed is 400MHz (DDR3-800, that is very low because DDR3 chip is rated for DDR3-1600). Not sure if DDR3 would go higher on fully booted unit).
* unit denies to boot if I cut some of PCI-e lanes. Normally, x4 PCI-e interface would work on x1 lane without any problem (with lower bandwidth), but PS4 LED flashes blue forever if I cut PCI-e down to 1 lane.
= X-ray Silicon Pron =
https://siliconpr0n.org/map/sony/saa-001/x-ray/




{{Components}}
{{Components}}
<noinclude>[[Category:Main]]</noinclude>
<noinclude>[[Category:Main]]</noinclude>

Latest revision as of 11:39, 27 October 2021

Gallery[edit | edit source]

Components[edit | edit source]

Component Package
APU CXD90026G
APU RAM K4G41325FC-HC03
Southbridge CXD90025G
Southbridge RAM K4B2G1646E-BCK0
Serial Flash MX25L25635FMI-10G
Syscon A01-COL
SATA MB86C311B
HDMI MN86471A
LAN 88EC060-NN82
Wireless communication module 88W8797
BD-ROM R8J32841FP1
USB 3.0 Hub GL3520

Notes on components[edit | edit source]

  • APU to MC link is PCI-e Gen2 (5Gbit/s, 4 lanes)
  • APU to BD-ROM is SATA I (1.5 Gbit/s)
  • DDR3 bootup speed is 400MHz (DDR3-800, that is very low because DDR3 chip is rated for DDR3-1600). Not sure if DDR3 would go higher on fully booted unit).
  • unit denies to boot if I cut some of PCI-e lanes. Normally, x4 PCI-e interface would work on x1 lane without any problem (with lower bandwidth), but PS4 LED flashes blue forever if I cut PCI-e down to 1 lane.

X-ray Silicon Pron[edit | edit source]

https://siliconpr0n.org/map/sony/saa-001/x-ray/


Motherboard
Prototype
Fat
SAA-001  ·  SAB-001  ·  SAC-001
Slim
SAD-001  ·  SAD-002  ·  SAD-003  ·  SAE-001  ·  SAE-002  ·  SAE-003  ·  SAE-004  ·  SAF-003  ·  SAF-004  ·  SAF-005  ·  SAF-006
Pro
NVA-001  ·  NVB-003  ·  NVB-004  ·  NVG-001  ·  NVG-002  ·  NVG-003  ·  NVG-004
Prototype
Fat
Pro
Other
Harddrive
Hitachi
Seagate
Bluray Drive
Drive
Laser
Daughterboard
BDP-010  ·  BDP-015  ·  BDP-020  ·  BDP-025  ·  BDT-010
Power Supply
Delta (ADP)
ADP-240AR  ·  ADP-240CR (N14-240P1A)  ·  ADP-200ER  ·  ADP-160CR  ·  ADP-160ER  ·  ADP-160FR  ·  ADP-300CR  ·  ADP-300ER  ·  ADP-300FR  ·  ADP-344AR
Power connectors
Interface
Retrieved from "http://www.psdevwiki.com/ps4/index.php?title=SAA-001&oldid=283596"