SAA-001: Difference between revisions
(username removed) |
No edit summary |
||
Line 29: | Line 29: | ||
File:SAA-001 - Backside - IMG 2992.JPG|[[SAA-001]] backside - image2992 | File:SAA-001 - Backside - IMG 2992.JPG|[[SAA-001]] backside - image2992 | ||
File:SAA-001 - Backside - IMG 2993.JPG|[[SAA-001]] backside - image2993 | File:SAA-001 - Backside - IMG 2993.JPG|[[SAA-001]] backside - image2993 | ||
File:SAA-001 - Backside - IMG | File:SAA-001 - Backside - IMG 2993.JPG|[[SAA-001]] backside - image2994 | ||
File:SAA-001 - Backside - IMG 2995.JPG|[[SAA-001]] backside - image2995 | File:SAA-001 - Backside - IMG 2995.JPG|[[SAA-001]] backside - image2995 | ||
File:SAA-001 - Backside - IMG 2996.JPG|[[SAA-001]] backside - image2996 | File:SAA-001 - Backside - IMG 2996.JPG|[[SAA-001]] backside - image2996 |
Revision as of 10:47, 24 November 2020
This article is marked for rewrite/restructuring in proper wiki format. You can help PS4 Developer wiki by editing it. |
SKU differentiation
- CUH-10xx series contain SAA-001 board.
productcode: 1-889-352-11 or 1-889-352-21
Gallery
SAA-001 - backside
SAA-001 - componentside
SAA-001 - componentside
SAA-001 - backside
PS4 Motherboard SAA-001 - main component side
PS4 Motherboard SAA-001 - back side
SAA-001 componentside - wm
SAA-001 backside - wm
SAA-001 componentside - image2984
SAA-001 componentside - image2984
SAA-001 componentside - image2984
SAA-001 componentside - image2984
SAA-001 componentside - image2984
SAA-001 componentside - image2984
SAA-001 componentside - image2990
SAA-001 componentside - image2991
- SAA-001 - Backside - IMG 2992.JPG
SAA-001 backside - image2992
SAA-001 backside - image2993
SAA-001 backside - image2994
SAA-001 backside - image2995
SAA-001 backside - image2996
SAA-001 backside - image2997
SAA-001 backside - image2998
Components
Component | Package |
---|---|
APU RAM |
CXD90026G K4G41325FC-HC03 |
SouthBridge RAM |
CXD90025G K4B2G1646E-BCK0 |
Flash | MX25L25635FMI-10G |
Syscon | A01-C0L |
SATA | MB86C311B |
HDMI | MN86471A |
LAN | 88EC060-NN82 |
Bluetooth / Wi-Fi | 88W8797 |
BD-ROM | R8J32841FP1 |
USB 3.0 Hub | GL3520 |
Notes on Components
<SoC> Some extra info:
- APU to MC link is indeed PCI-e Gen2 (5Gbit/s, 4 lanes)
- APU to BD-ROM is SATA I (1.5 Gbit/s)
- DDR3 bootup speed is 400MHz (DDR3-800, that's very low because DDR chip is rated for DDR3-1600). Not sure if DDR3 would go higher on fully booted unit).
- unit denies to boot if I cut some of PCI-e lanes. Normally, x4 PCI-e interface would work on x1 lane w/o problems (with lower bandwidth), but PS4 flashes blue forever if I cut PCI-e down to 1 lane.
|