Editing Talk:Service Connectors

Jump to navigation Jump to search
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 1: Line 1:
= UART Testpoints =
== SAA-001 ==
[[File:Saa001uart.jpg]]
== SAC-001 ==
[[File:Sac001uartpoints.jpg]]
== SAD-001 ==
[[File:SAD-001uart.jpg]]
== SAE-004 ==
[[File:Sae-004uart.jpg]]
== NVG-002 ==
[[File:Nvg-002.jpg]]
= Pad Info =
[[Internal#pads_3_(A01-C0L)| This pad]] is used for the same purpose as on the [http://www.psdevwiki.com/ps3/Service_Connectors PS3 System]; a ZIF connector is preset on prototype versions.
[[Internal#pads_3_(A01-C0L)| This pad]] is used for the same purpose as on the [http://www.psdevwiki.com/ps3/Service_Connectors PS3 System]; a ZIF connector is preset on prototype versions.


Line 32: Line 9:


***** You can end up dumping the syscon flash (on ps4 and possibly vita and and ps3 as well) by glitching it
***** You can end up dumping the syscon flash (on ps4 and possibly vita and and ps3 as well) by glitching it
****** Dumping and modifying is a big jump though.
******* You can also program it (the pinouts are known)
******** It would be nice to be able to modify it to skip any error checking (thus be able to boot even with hardware/software issues) - I think the syscon handles this...
=== 1st GEN Pinouts ===
<pre>
SC
syscon, rl78/g13
  1    P142       
  2    P141        VR-VRDY1
  3    P140        VR-VRDY2
  4    P120        power switch(USBHUB)
  5    P47        VR-VRHOT_ICRIT
  6    P46        power switch(BUZZER)
  7    P45        NC
  8    P44        VR-PWROK + APU-PWROK
  9    P43        APU-RESET#
10    P42        (HDR-A SPI-CS)
11    P41        power switch(PSU-7)
12    P40        TOOL0 -> HDR-A pin 22 (open circuit between pin and header)
13    RESET#      -> HDR-A pin 24
14    P124        pulldown?
15    P123        power switch(PSU-5)
16    P137        testpoint?
17    P122        -> HDR-A pin 28 (4bit input-only, port 12)
18    P121        -> HDR-A pin 29 (4bit input-only, port 12)
19    REGC        cap to GND
20    Vss        GND
21    EVss0      GND
22    Vdd        Vcc
23    EVdd0      == pin 22
24    P60        APU i2c dev 0xba
25    P61        APU i2c dev 0xba
26    P62        APU i2c dev 0x78/0x98
27    P63        APU i2c dev 0x78/0x98
28    P31        FAN-CTL
29    P64        power switch(HDMI-0 + APU-4)
30    P65        LED
31    P66        LED
32    P67        LED
33    P77        pulldown
34    P76       
35    P75        APU?
36    P74       
37    P73        power switch(USBBRIDGE + HDD)
38    P72        -> HDR-A pin 12 (HDR-A SPI-SO)
39    P71        (HDR-A SPI-SI)
40    P70        -> HDR-A pin 10 (HDR-A SPI-CLK)
41    P06        power switch(PSU-1)
42    P05       
43    EVss1      GND
44    P80        STM8-PWR pin 7 (NRST)
45    P81        NC testpoint
46    P82        LED
47    P83        power switch(PSU-4)
48    P84        pulldown?
49    P85        power switch(PSU-2)
50    P86        power switch(APU-0) + PSW-APU-3 pin 3
51    P87        VR-EN + power switch(APU-1)
52    P30        NC testpoint
53    EVdd1      Vcc
54    P50        power switch(SB-1 + SB-2 + DDR3)
55    P51        power switch(SB-0) (6pin near wifi + 8pin between SC/SB)
56    P52        testpoint?
57    P53        VR-SM_CLK
58    P54        VR-SM_DIO
59    P55        power switch(APU-2)
60    P56       
61    P57       
62    P17       
63    P16        SB-TP0 looks like SB -> SC interrupt line (INTP5)
64    P15        SB-TP1 (SPI-CLK)
65    P14        SB-TP2 (SPI-SI) + SC-P11 in a weird way? + elsewhere
66    P13        SB-TP3 (SPI-SO)
67    P12        -> HDR-A pin 15 (SC ucmd UART)
68    P11        -> HDR-A pin 16 (SC ucmd UART)
69    P10        SB-TP4 (SPI-CS)
70    P101        power switch(VR)
71    P110       
72    P111       
73    P146        NC
74    P147        power switch(HDMI-1)
75    P100        power switch(PSU-0)
76    P156        pulldown?
77    P155        pulldown?
78    P154        PSW-APU-2 pin 1 + PSW-APU-3 pin 1
79    P153        -> HDR-G pin 11
80    P152        -> HDR-G pin 15
81    P151        power switch(PSU-3)
82    P150        WIFI reset?
83    P27        NC testpoint
84    P26        STM8-PWR pin 1 + HDR-C pin 8 (POWER#) (serial clock)
85    P25        STM8-EJECT pin 1 + HDR-C pin 7 (EJECT#)
86    P24        pulldown?
87    P23        pulldown?
88    P22       
89    P21        NC testpoint
90    P20       
91    P130        power switch(PSU-6) (P130 is tied to sc-internal RESET)
92    P102       
93    P04        i2c (pcie clockgen smbus?)
94    P03        -> HDR-F pin 1 (i2c (pcie clockgen smbus?))
95    P02        -> HDR-F pin 2 (XXX did i fuckup the HDR-F mapping here?)
96    P01       
97    P00       
98    P145       
99    P144       
100    P143       
VR (IR3585, 48pin QFN)
Dual Output Digital Multi-Phase Controller
outputs:
    loop 1: VddNb
    loop 2: Vdd
pinout seems to match https://www.infineon.com/dgdl/pb-ir3565a.pdf?fileId=5546d462533600a40153568011cc28e5
  1    RCSP
  2    RCSM
  3    VRDY2              SC-P140
  4    CFP                NC
  5    VSEN                VddNb sense
  6    VRTN                VddNb sense
  7    RRES
  8    TSEN1              VddNb
  9    V18A
10    PWRGD/VRDY1        SC-P141
11    PWROK/EN_L2/INMODE  SC-P44
12    VINSEN
13    NC
14    VIDDIO/SV_ADDR
15    SVT/SV_ALERT
16    SV_CLK/VIDSEL1
17    SV_DIO/VIDSEL0
18    VRHOT_ICRIT        SC-P47
19    EN                  SC-P87 + power switch(APU-1)
20    ADDR_PROT          pulldown
21    SM_ALERT            pullup
22    SM_DIO              SC-P54
23    SM_CLK              SC-P53
24    NC
25    VGD/TSEN2/VAUXSEN  Vdd
26    PWM1                VddNb
27    PWM2                VddNb
28    PWM3                VddNb
29    PWM4                VddNb
30    PWM2_L2            Vdd
31    PWM1_L2            Vdd
32    VRTN_L2            Vdd sense
33    VSEN_L2            Vdd sense
34    VCC
35    RCSM_L2            Vdd
36    RCSP_L2            Vdd
37    ISEN1_L2            Vdd
38    IRTN1_L2            Vdd
39    ISEN2_L2            Vdd
40    IRTN2_L2            Vdd
41    ISEN4              VddNb
42    IRTN4              VddNb
43    ISEN3              VddNb
44    IRTN3              VddNb
45    ISEN2              VddNb
46    IRTN2              VddNb
47    ISEN1              VddNb
48    IRTN1              VddNb
HDR-A (bottom, 1x30 near sata edge connector)
  1    Vcc?
  2    NC
  3    == pin 1
  4   
  5   
  6    GND
  7    -> HDR-D pin 2
  8   
  9    GND
10    SC-P70
11   
12    SC-P72
13   
14    GND
15    SC-P12
16    SC-P11
17    SC-P51
18    GND
19    -> SB?
20    -> SB?
21    -> SB?
22    SC-P40 (TOOL0) open circuit
23    GND
24    SC-RESET#
25    GND
26    UNK-26
27    UNK-27
28    SC-P122
29    SC-P121
30    NC
HDR-B (bottom, 1x20 between HDR-A and SB)
  1    Vcc?
  2    GND
  3   
  4    GND
  5   
  6   
  7   
  8   
  9   
10   
11    GND
12    SB-20/S (SDIO?) probably for eMMC
13    GND
14    SB-19/R (SDIO?)
15    SB SDIO?
16    SB SDIO?
17    SB SDIO?
18    SB SDIO?
19    GND
20    NC
HDR-C (bottom, 2x5 on edge near BD sata connector)
numbering in U-shape
  1    Vcc?
  2    STM8-PWR pin 7 (NRST)
  3    STM8-PWR pin 27 (BEEP)
  4    GND
  5    GND
  6    NC
  7    STM8-PWR pin 1 + SC-P25 (open circuit)
  8    STM8-EJECT pin 1 + SC-P26 (goes thru HDR-G pin 10) (open circuit)
  9    NC
10    GND
HDR-D (bottom, 2x4 underneath battery)
numbering in U-shape
  1    -> HDR-A pin 8
  2    -> HDR-A pin 7
  3    NC
  4    GND
  5    Vcc?
  6    == pin 5
  7    == pin 5
  8    == pin 5
HDR-E (bottom, 1x14 SB/eth phy related?)
  1    GND
  2    GND
  3   
  4    GND
  5   
  6    GND
  7   
  8    GND
  9   
10   
11    Vcc?
12    == pin 11
13    == pin 11
14    == pin 11
HDR-F (top, near WIFI antennas)
IDT6V41265 smbus
numbering in U-shape
  1    -> IDT6V41265 pin 23 + SC-P03 (DAT)
  2    -> IDT6V41265 pin 22 + SC-P02 (CLK @ 100khz)
  3    NC
  4    GND
  5    Vcc? (connected to some IDT6V41265 voltage pins)
  6    == pin 5
  7    GND
  8    == pin 5
IDT6V41265
clk3 used by SB during ROM (directly out of reset)
clk4 used by SB in late boot
SC (or SB?) writes to smbus while SB ROM is reading IPL
  1    GND
  2    vref?
  3    clk0_0
  4    clk0_1
  5    vref?
  6    GND
  7    vref?
  8    vref?
  9    GND
10    clk1_0
11    clk1_1
12    vref?
13    vref?
14    clk2_0
15    clk2_1
16    GND
17    vref?
18    vref?
19    NC (testpoint)
20    NC (testpoint)
21    GND
22    smbus CLK 100khz
23    smbus DAT
24    reset# (-> SB?)
25    GND
26    25mhz xtal
27    25mhz xtal
28    vref?
29    vref?
30    GND
31    clk3_0  100mhz SS
32    clk3_1
33    vref?
34    vref?
35    clk4    100mhz
36    GND
37    -> eth phy (clk?)
38    vref?
39    vref?
40    NC (testpoint)
41   
42    GND
43   
44   
45    -> hdmi (clk?)
46    vref?
47    vref?
48    GND
HDR-G (top, 1x24 connector to BD)
  1    GND
  2    SATA
  3    SATA
  4    GND
  5    GND
  6    SATA
  7    SATA
  8    GND
  9    GND
10    -> HDR-C pin 8
11    SC-P153
12   
13    STM8-PWR pin 7 (NRST)
14    GND
15    SC-P152
16    hard to track, SB?
17   
18   
19   
20    GND
21    STM8-PWR pin 3 (SPI MOSI)
22    STM8-PWR pin 2 (SPI MISO)
23    testpoint -> BD?
24    cap to Vcc?
</pre>
* Thx F0F
Please note that all contributions to PS4 Developer wiki are considered to be released under the GNU Free Documentation License 1.2 (see PS4 Developer wiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To protect the wiki against automated edit spam, we kindly ask you to solve the following hCaptcha:

Cancel Editing help (opens in new window)
Retrieved from "http://www.psdevwiki.com/ps4/Talk:Service_Connectors"