Talk:Hardware flashing

Testreport table

Board	Flash	Dumping	Writing	Remarks
COK-001	2x Samsung K9F1G08U0A-PIB0
COK-002	2x Samsung K9F1G08U0A-PIB0
SEM-001	2x Samsung K9F1G08UOB-PIB0
SEM-001	2x Samsung K9F1G08UOB-PIB0	Yes	No	sel99 : CECHG / SEM-001 - 1-875-384-31 - can dump both NANDs fine, have trouble writing. both with Infectus and Progskeet. Boards below CECHG / SEM-001 flash fine.
SEM-001	2x Samsung K9F1G08UOB-PIB0	Yes	No	delsol : SEM-001 - 1-875-384-31 - dump both NANDs fine, still not able to reflash the nands correctly. there are always differences. Tried with Infectus.
DIA-001	1x Spansion S29GL128N90TFIR2
DIA-001	1x Spansion S29GL128N90TFIR2	Yes	No	delsol : flasher still freeze at sector0 (A&B) dumping seems to works (A&B). Same result with and without resistors. Tried on winxp-sp2 and win7. // The best results i got was using the 9k & 100k resistors. the flash is unuseable but ProgSkeet_110819 doesen´t freeze anymore. // I have tried Teensy and NORway0.3: dumping of nor works fine, but everytime when i tried to flash, the pc loose usb-connection to Teensy
DIA-002	1x Spansion S29GL128N90TFIR2
VER-001	1x Spansion S29GL128P90TFIR2
VER-001	1x Samsung K8Q2815UQB-PI4B
VER-001	1x Samsung K8Q2815UQB-PI4B	Yes	No	Ryd3R : I'm currently working on editing NORWay script to make it support writing using (4k/4096) .
VER-001	1x Spansion S29GL128P90TFIR2	Yes	No	toxie : tried 128k/128 , 4k/4096. writing without alt. all FF, with alt some random patterns with 00 and FF when writing all 00. Trying A/B trick, still at Programming Sector 0
VER-001	1x Spansion S29GL128P90TFIR2	Yes	No	ares : tried 128k/128 , 4k/4096. With normal method a lot ff and same byte match. With alternate method 00 and ff and some byte match. Without resistor trick programmer freeze programming sector 0. with 100k and 9k resistor i can write but with errors (programmer completes the write, but the dump is all 00 ff, only few byte match, this with alternatemethod). with a/b tick's programmer (version A and B ) it freeze on programming sector 0 (both with or without resistors)
DYN-001	1x Samsung K8Q2815UQB-PI4B
DYN-001	1x Macronix MX29GL128ELT2I-90G
JTP-001	1x Spansion S29GL128P90TFIR2
JTP-001	1x Spansion S29GL128P90TFIR2	Yes	Yes	drako_ : success downgrading from 3.70 to 3.55 with wiring according to JSD-001 diagram, with 5 grounds and settings 128K/128 (progskeet).
JSD-001	1x Spansion S29GL128P90TFIR2
JSD-001	1x Spansion S29GL128P90TFIR2	Yes	Yes	Ryd3R : NORway 0.3 fully support R/W on Spansion S29GL128P90TFIR2 .
JSD-001	1x Spansion S29GL128P90TFIR2	Yes	Yes	kado : Downgrading 3.70 to 3.55 success with progskeet (differ ON, alter ON) NOTE: THIS BOARD HAS different lengt normally (lenght is E990)
KTE-001	1x Spansion S29GL128P90TFIR2
KTE-001	1x Macronix MX29GL128ELT2I-90G
EXA-MPLE	1x dummy	Yes	No	example : Tried 128/128 and 4K/4096, resistor and A/B trick, always freezes on first sector

Users With NORway (teensy++) who maybe could do pretesting :

Ryd3R

Users with Injectus who maybe could do some pretesting :

ares
damox
delsol

NAND

NAND (256MB, old FAT models, needs 32 wires, 15 per NAND + GND + VCC)
2 chips: Samsung K9F1G08U0A-PIB0

http://www.uchobby.com/index.php/2007/05/05/read-embedded-flash-chips/

NAND_Dumper_Extractor.rar (1.55 MB)

FlowRebuilder v.4.1.0.0

NOR

NOR 16MB, newer FAT models + Slims
needs 44 I/O wires: 23 address lines:A0-A22 + 16 Data lines:D0-D15 + 5 control lines: CE#,OE#,WE#,RESET#,TRISTATE (optional:#RY-BY) + GND + VCC
(NB: RY/BY is optional only for Teensy, Progskeet NEED ALL controllines!)

1 chip: Spansion S29GL128N90TFIR2 or Samsung K8Q2815UQB-P14B

NOR uses 1024 byte sector, just as NAND.