Talk:Teensy++ 2.0

From PS3 Developer wiki
Revision as of 19:48, 15 October 2015 by Sandungas (talk | contribs) (moved from front page)
Jump to navigation Jump to search

Teensy talk

https://forum.pjrc.com/threads/23601-Official-Distributors

Where to buy?

NANDway

  • Solder 3.3V regulator on Teensy (and cut 5V pad)
  • Flash the HEX to the Teensy
  • Solder all control + I/O wires + Ground
  • Crash it (it will beep and blink red led), press power button to have a solid red led
  • Make sure to use the right nand id for nandway.py
  • Dump it

Onboard Regulator alternatives

On PJRC they recommend/sell the MCP1825, a SOT223 package lowdrop regulator of 500mA with fixated 3.3V output. If for some reason you want another fixated SOT223, but with a bit more current (ofcourse maximum power is limited by the bus used for feeding, e.g. one USB 2.0 port is normally limited to 2.5W), you might consider these:

  • 3.3V / 1000mA
    • MCP1826S-3302E/DB or MCP1826T-3302E/DC
    • MIC37100-3.3WS

External Powering Notes

<judges> nand powered with 3.3v by atx doesnt work
<judges> nand powered by teensy requires huge delays to work kind of reliable
<judges> teensy powered by usb, nand powered by external psu with 2v works like a charm..
<judges> thats why nandway worked for me.. it's slow. my own version is almost twice as fast and only worked on my first nand. second one always gave errors..
<judges> powered by teensy seems to be right on the edge of whats still working
<judges> but only with 10ms delays between page reads..
<judges> current power draw is 1.13amps at 2v
<judges> nand control lines are pulled high by starship and teensy isnt able to pull them low
<judges> 2v-2.5v works fine
<judges> stops working at 2.8v

<judges> it seems to be kind of variable.. <@eussNL> 1.5Amps at 2.5V is more than enough, right judges ?
<judges> using my version of nandway you'll need [email protected]
<judges> using the original one you'll need [email protected]
<judges> my version drives i/o lines differently
<judges> also original doesnt even work at 2.5V
<judges> 1.7V still works fine for both versions and only takes max 1.2A
<judges> as i said, original version doesnt work at 2.5v
<judges> 2.2v max

1.65V / 1.8V / 2.5V - 1.5A regulators

NORway Mac OS-X patch

if you are on Mac OS-X and having problems with timeouts: 

<MikeM64> hahaha, it's a dirty fix, but it seems to work XD
<MikeM64> lemme compile diffs, I got perfect writes happening on my mac now
<MikeM64> 10 writes and 2 timeouts; not bad. better than 20 timeouts / write
<MikeM64> http://pastie.org/8570558 if anyone needs it

to wikify

http://www.ps3hax.net/showpost.php?p=573027&postcount=820

http://www.ps3hax.net/showpost.php?p=576130&postcount=843

http://www.ps3hax.net/showthread.php?t=25408

http://www.psx-place.com/forum/downgrading/trick-teensy-2-0-nor-flashing-norway-write-perfirmware-data-2476.html#post19255

Panel mount USB connectors and cables

http://pinouts.ru/Slots/usb_pinout.shtml

http://pinouts.ru/PortableDevices/mini-USB_pinout.shtml

  • Mini USB B male to USB B female panel mount
    • PROS - Easy to find, very cheap, "USB B female" is the one used in the first USB printers
    • CONS - "USB B female" is a bit bulky
  • Mini USB B male to Mini USB B female panel mount
    • PROS - Small size
    • CONS - Very hard to find
  • Mini USB B female conector, bayonet type panel mount
    • PROS - perfect look of the work made in the PS3 case, looks like factory
    • CONS - very expensive, hard to find, you need to solder your own cables in it
  • Mini USB B Male to Mini USB B Female extension cable
    • PROS - Easy to find, very cheap
    • CONS - Is not for panel mounting, but you can make your own guetto adapter for mounting it in a panel
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Talk:Teensy%2B%2B_2.0&oldid=39387"