Template:Toshiba T6UN6EFG Pinout

From PS3 Developer wiki
Revision as of 17:48, 20 September 2017 by Sandungas (talk | contribs) (repurposing colors... now blue tones = bluetooth)
Jump to navigation Jump to search
Toshiba T6UN6EFG Pinout
[edit]
Pin # Name Port Description
1 GND To ground
2 V_STBY 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, Dualshock PS button, and LED's
3 GND To ground
4 V_BATT Capacitor network to ground, and resistor to battery and Texas Instruments SN89062 pin 16 in VX4 boards
5 V_STBY 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, Dualshock PS button, and LED's
6 SENSOR_ACCL_X To acccelerometer X axis through resistor
7 SENSOR_ACCL_Y To acccelerometer Y axis through resistor
8 SENSOR_ACCL_Z To acccelerometer Z axis through resistor
9 SENSOR_GYRO To gyroscope through resistor
10 V_STBY 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, Dualshock PS button, and LED's
11 SLAVES_RESET Texas Instruments SN84001 pin 2, and ALPS 413A pin 5 through resistor network in VX4 boards
12 GND To ground
13 BT_POWER_CTRL ? Texas Instruments SN89062, pin 4 in VX4 boards
14 BT_UART_SELECT ? To BT module (ALPS 413A pin 8 in VX4 boards) through resistor
15 BT_UART_RX ? To BT module (ALPS 413A pin 6 in VX4 boards) through resistor network
16 BT_UART_TX ? To BT module (ALPS 413A pin 9 in VX4 boards) through resistor network
17 BT_UART_UNK ? To BT module (ALPS 413A pin 7 in VX4 boards)
18 BT_UNK_1 To BT module (ALPS 413A pin 14 in VX4 boards)
19 BT_UNK_2 To BT module (ALPS 413A pin 28 in VX4 boards)
20 GND To ground
21 V_STBY 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, Dualshock PS button, and LED's
22 GND To ground
23 LED_1 To led 1 cathode through resistor network
24 LED_2 To led 2 cathode through resistor network
25 LED_3 To led 3 cathode through resistor network
26 LED_4 To led 4 cathode through resistor network
27 Not connected ? (for the PS button backlight led in prototypes ?)
28 MOTOR_SMALL Small Motor + (rumble)
29 MOTOR_BIG Big Motor + (rumble)
30 EEPROM_SPI_CLOCK EEPROM, pin 6 in VX4 boards
31 EEPROM_SELECT EEPROM, pin 1 in VX4 boards
32 GND To ground
33 V_STBY 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, Dualshock PS button, and LED's
34 EEPROM_SPI_MOSI EEPROM, pin 5 in VX4 boards
35 EEPROM_SPI_MISO EEPROM, pin 2 in VX4 boards
36 STICKS_POWER_CTRL ? Texas Instruments SN89062, pin 17 in VX4 boards
37 LX_V ? resistor network, and then capacitor network to ground, and to Texas Instruments SN84001 pin 21 in VX4 boards
38 LY_V ? resistor network, and then capacitor network to ground, and to Texas Instruments SN84001 pin 20 in VX4 boards
39 RX_V ? resistor network, and then capacitor network to ground, and to Texas Instruments SN84001 pin 19 in VX4 boards
40 RY_V ? resistor network, and then capacitor network to ground, and to Texas Instruments SN84001 pin 18 in VX4 boards
41 BATT_CHARGE_SETPOINT Texas Instruments SN89062, pin 21 in VX4 boards
42 BATT_USB_POWER_GOOD ? Texas Instruments SN89062, pin 5 in VX4 boards
43 BATT_CHARGE_START ? Texas Instruments SN89062, pin 2 in VX4 boards
44 BATT_STATUS_1 ? Texas Instruments SN89062, pin 10 in VX4 boards (and TP8 in VX4 boards)
45 BATT_STATUS_2 ? Texas Instruments SN89062, pin 12 in VX4 boards (and TP9 in VX4 boards)
46 COM_3 COM 3 (Common Line for Digital Dualshock L3 button Dualshock select button Dualshock start button Dualshock R3 button))
47 BUTTON_ANALOG_UP D-Pad UP Button
48 BUTTON_ANALOG_RIGHT D-Pad RIGHT Button
49 BUTTON_ANALOG_DOWN D-Pad DOWN Button
50 BUTTON_ANALOG_LEFT D-Pad LEFT Button
51 V_STBY 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, Dualshock PS button, and LED's
52 GND To ground
53 BUTTON_ANALOG_L2 Dualshock L2 button
54 BUTTON_ANALOG_L1 Dualshock L1 button
55 Not connected ? (connected to something in PP1 prototype)
56 BUTTON_ANALOG_R2 Dualshock R2 button
57 BUTTON_ANALOG_R1 Dualshock R1 button
58 BUTTON_ANALOG_TRIANGLE Dualshock triangle button
59 BUTTON_ANALOG_CIRCLE Dualshock circle button
60 BUTTON_ANALOG_CROSS Dualshock cross button
61 BUTTON_ANALOG_SQUARE Dualshock square button
62 Not connected ? (connected to something in PP1 prototype)
63 Not connected ? (connected to something in PP1 prototype)
64 BUTTON_DIGITAL_SELECT Dualshock select button
65 BUTTON_DIGITAL_L3 Dualshock L3 button
66 BUTTON_DIGITAL_R3 Dualshock R3 button
67 BUTTON_DIGITAL_START Dualshock start button
68 BUTTON_DIGITAL_PLAYSTATION Dualshock PS button
69 To a testpoint (TP23 in VX4 boards), and 8.45K resistor to NTC 8K thermistor to standby rail (TP11 in VX4 boards)
70 GND To ground
71 GND
72 GND
73 V_STBY 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, Dualshock PS button, and LED's
74 Capacitor network to ground, and NTC 8K thermistor to standby rail
75 COM_1 Capacitor network to ground, and to ribbon circuit board COM 1 pin (Common Line for Analog D-Pad LEFT Button D-Pad DOWN Button D-Pad RIGHT Button D-Pad UP Button Dualshock L1 button Dualshock L2 button)
76 COM_2 Capacitor network to ground, and to ribbon circuit board COM 2 pin (Common Line for Analog Dualshock square button Dualshock cross button Dualshock circle button Dualshock triangle button Dualshock R1 button Dualshock R2 button)
77 LX Left Stick, X axis Capacitor network to ground, and to Texas Instruments SN84001 pin 25 in VX4 boards
78 LY Left Stick, Y axis Capacitor network to ground, and to Texas Instruments SN84001 pin 24 in VX4 boards
79 RX Right Stick, X axis Capacitor network to ground, and to Texas Instruments SN84001 pin 23 in VX4 boards
80 RY Right Stick, Y axis Capacitor network to ground, and to Texas Instruments SN84001 pin 22 in VX4 boards
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Template:Toshiba_T6UN6EFG_Pinout&oldid=46389"