Talk:Hardware flashing: Difference between revisions
Line 107: | Line 107: | ||
See it all here: http://www.youtube.com/watch?v=-FJsuc_uAjc | See it all here: http://www.youtube.com/watch?v=-FJsuc_uAjc | ||
Maximum harddrive 2.5TB according to E3 website (currently down) | Maximum harddrive 2.5TB according to E3 website (currently down) | ||
Dual Boot 3.7OFW and 3.55CFW on same PS3 | |||
Downgrade 3.7 to 3.55 in 5min | |||
16M NOR FLASH ON board | |||
3 save MODE, can save data in TF, NOR FLASH on board and PC HD | |||
1 KEY operation, simple is best | |||
Upgradable from TF card or PC USB | |||
Compatiable all device like PS3/WII/XBOX360/MP3/DVD/BD/MP4/Table PC which has NAND or NOR flash memory. | |||
Integrated lots of interface, perfectly extension, will have more function with future new E3 accessory. | |||
E3 flasher Limited version includes 8 accessory, suggested retail price $88 USD, total production run only 3000 units! | |||
== Problematic Samsung related == | == Problematic Samsung related == |
Revision as of 18:01, 7 September 2011
Testreport table
Board | Flash | Dumping | Writing | Remarks |
---|---|---|---|---|
COK-001 | 2x Samsung K9F1G08U0A-PIB0 | |||
COK-002 | 2x Samsung K9F1G08U0A-PIB0 | |||
SEM-001 | 2x Samsung K9F1G08UOB-PIB0 | |||
SEM-001 | 2x Samsung K9F1G08UOB-PIB0 | Yes | No | sel99 : CECHG / SEM-001 - 1-875-384-31 - can dump both NANDs fine, have trouble writing. both with Infectus and Progskeet. Boards below CECHG / SEM-001 flash fine. |
SEM-001 | 2x Samsung K9F1G08UOB-PIB0 | Yes | No | delsol : SEM-001 - 1-875-384-31 - dump both NANDs fine, still not able to reflash the nands correctly. there are always differences. Tried with Infectus. |
DIA-001 | 1x Spansion S29GL128N90TFIR2 | |||
DIA-001 | 1x Spansion S29GL128N90TFIR2 | Yes | No | delsol : flasher still freeze at sector0 (A&B) dumping seems to works (A&B). Same result with and without resistors. Tried on winxp-sp2 and win7. // The best results i got was using the 9k & 100k resistors. the flash is unuseable but ProgSkeet_110819 doesen´t freeze anymore. // I have tried Teensy and NORway0.3: dumping of nor works fine, but everytime when i tried to flash, the pc loose usb-connection to Teensy |
DIA-002 | 1x Spansion S29GL128N90TFIR2 | |||
VER-001 | 1x Spansion S29GL128P90TFIR2 | Yes | Yes | kado : Downgrading 3.70 to 3.55 success with progskeet (differ ON, No special trick) |
VER-001 | 1x Samsung K8Q2815UQB-PI4B | |||
VER-001 | 1x Samsung K8Q2815UQB-PI4B | Yes | Yes | Ir0nmanNB : Used all gnds listed on the diagram. I probe progskeet_rdy with my multimeter - I get 3.3V when writing and 0.9V when frozen. When giving progskeet_rdy direct 3.3v it no longer freezes. Writing succesfull when diffential flash is checked. |
VER-001 | 1x Samsung K8Q2815UQB-PI4B | Yes | No | Ryd3R : I'm currently working on editing NORWay script to make it support writing using (4k/4096) . |
VER-001 | 1x Spansion S29GL128P90TFIR2 | Yes | No | toxie : tried 128k/128 , 4k/4096. writing without alt. all FF, with alt some random patterns with 00 and FF when writing all 00. Trying A/B trick, still at Programming Sector 0 |
VER-001 | 1x Spansion S29GL128P90TFIR2 | Yes | No | ares : tried 128k/128 , 4k/4096. With normal method a lot ff and same byte match. With alternate method 00 and ff and some byte match. Without resistor trick programmer freeze programming sector 0. with 100k and 9k resistor i can write but with errors (programmer completes the write, but the dump is all 00 ff, only few byte match, this with alternatemethod). with a/b tick's programmer (version A and B ) it freeze on programming sector 0 (both with or without resistors) |
DYN-001 | 1x Samsung K8Q2815UQB-PI4B | |||
DYN-001 | 1x Macronix MX29GL128ELT2I-90G | Yes | Yes | Ryd3R : NORway 0.3 fully support R/W on Macronix MX29GL128ELT2I-90G. |
SUR-001 | - | |||
JTP-001 | 1x Spansion S29GL128P90TFIR2 | |||
JTP-001 | 1x Spansion S29GL128P90TFIR2 | Yes | Yes | drako_ : success downgrading from 3.70 to 3.55 with wiring according to JSD-001 diagram, with 5 grounds and settings 128K/128 (progskeet). |
JTP-001 | 1x Spansion S29GL128P90TFIR2 | Yes | Yes | Ryd3R : success downgrading from 3.70 to 3.55 with wiring according to JSD-001 diagram NORway v0.3 . |
JSD-001 | 1x Spansion S29GL128P90TFIR2 | |||
JSD-001 | 1x Samsung K8P2716UZC-QI4D | |||
JSD-001 | 1x Samsung K8P2716UZC-QI4D | Yes | Yes | Ryd3R : NORway 0.3 fully support R/W on Samsung K8P2716UZC-QI4D. |
JSD-001 | 1x Spansion S29GL128P90TFIR2 | Yes | Yes |
kado : Downgrading 3.70 to 3.55 success with progskeet (differ ON, alter ON) NOTE: THIS BOARD HAS different lengt normally (lenght is E990) |
KTE-001 | 1x Spansion S29GL128P90TFIR2 | |||
KTE-001 | 1x Macronix MX29GL128ELT2I-90G | |||
EXA-MPLE | 1x dummy | Yes | No | example : Tried 128/128 and 4K/4096, resistor and A/B trick, always freezes on first sector |
Pretesters
Users With NORway (teensy++) who maybe could do pretesting :
Ryd3R
Users with Injectus who maybe could do some pretesting :
ares damox delsol
http://imageshack.us/f/221/coverboardfronts.jpg/
Front of E3:
- microSD slot
- Start button
- Stop button
- LED: flash fun?
- LED:PS1 mode
- Switch?
- LED: CFW
- LED: OFW
- Switch?
- LED: Backup
- LED: Prog
- Switch?
- marking: Backup
- LED: OB Flash
- MicroSD
- Switch?
- LED: ON Flash
- LED: PS3Flash
- Switch?
- marking: Prog
- LED: Unlock
- LED: Lock
- ESATA Plug
- microUSB Plug
See it all here: http://www.youtube.com/watch?v=-FJsuc_uAjc
Maximum harddrive 2.5TB according to E3 website (currently down)
Dual Boot 3.7OFW and 3.55CFW on same PS3 Downgrade 3.7 to 3.55 in 5min 16M NOR FLASH ON board 3 save MODE, can save data in TF, NOR FLASH on board and PC HD 1 KEY operation, simple is best Upgradable from TF card or PC USB Compatiable all device like PS3/WII/XBOX360/MP3/DVD/BD/MP4/Table PC which has NAND or NOR flash memory. Integrated lots of interface, perfectly extension, will have more function with future new E3 accessory. E3 flasher Limited version includes 8 accessory, suggested retail price $88 USD, total production run only 3000 units!
<jevin> nikitis, want to work tonight on getting samsung support working w/ teesny? <jevin> ive got a hack to get around the different block sizes throughout the chip: just chip erase the whole thing <jevin> and that chip erase is actually 2 chip erases, one with a22 low and one with a22 high (internally there are 2 8MB nor dies) <jevin> then when flashing you cant use the write buffer command (there is no buffer) <jevin> and have to instead use slower unlocked programming <jevin> nikitis, ive had my teensy soldered up for nearly a week in the hopefully new, emi-proof location but havent hacked up the mobo shield to make it actually fit. i should try it tonight to see if it works
<kado> i want to confirm about RSOD <kado> my english is bad, but i want you can tell to evryone <kado> there is 2 types of RSOD <kado> 1.come from CFW 2.from OFW <kado> if coused by CFW we should patch the cVTRM <kado> and if coused by OFW we should patch the core_OS. and use the last official Core_OS <kado> btw, i have fix this 2pcs off RSOD today
Old reference
(don't remove, not all is on mainpage)
NAND
NAND (256MB, old FAT models, needs 32 wires, 15 per NAND + GND + VCC)
2 chips: Samsung K9F1G08U0A-PIB0
NOR
NOR 16MB, newer FAT models + Slims
needs 44 I/O wires: 23 address lines:A0-A22 + 16 Data lines:D0-D15 + 5 control lines:
CE#,OE#,WE#,RESET#,TRISTATE (optional:#RY-BY) + GND + VCC
(NB: RY/BY is optional only for Teensy, Progskeet NEED ALL controllines!)
1 chip: Spansion S29GL128N90TFIR2 or Samsung K8Q2815UQB-P14B
NOR uses 1024 byte sector, just as NAND.
- noralizer.rar (9.95 MB) incl. 2 different FAT models (CECHL04-jestero + CECH?-Phiren) pads labeled
- http://hotfile.com/dl/118618929/f6914e0/ps3flasher.tgz.html (note: older version)
Alternatives for Infectus2 and Teensy 2.0++:
- Progskeet (UF6667) : http://twitpic.com/5pk6dz // http://fronttowardsgamer.com/2011/07/15/exclusive-hacker-talks-progskeet-geohot-and-why-he-doesnt-give-a-sht-about-sony/
- quad NAND with Progskeet: http://subirimg.com/images/img2065.jpg