Template:HSW-001 pinout: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
mNo edit summary
mNo edit summary
Line 5: Line 5:
! On Motherboard !! On Switch board
! On Motherboard !! On Switch board
|-{{cellcolors|grey|#ffffff}}
|-{{cellcolors|grey|#ffffff}}
| 1 || pin12 @ Syscon [[SW2-30x]] || 4x CONTOUR LEDs, transistor base pin || The transistor is located in the switch board and drives 2 LEDs with currentlimitor resistors of 3K {{ohm}} (red led at left-top) and 820 {{ohm}} (blue led at left-bottom)<br>The circuit has unpopulated pads to add another transistor and another 2 LEDs for a total of 4 LEDs driven by <abbr title="the line is inactive in all known working modes, the leds never emits light because syscon never sends the signal">a misterious syscon pin</abbr>
| 1 || Syscon [[SW2-30x]], pin 12 || 4x CONTOUR LEDs, transistor base pin || The transistor is located in the switch board and drives 2 LEDs with currentlimitor resistors of 3K {{ohm}} (red led at left-top) and 820 {{ohm}} (blue led at left-bottom)<br>The circuit has unpopulated pads to add another transistor and another 2 LEDs for a total of 4 LEDs driven by <abbr title="the line is inactive in all known working modes, the leds never emits light because syscon never sends the signal">a misterious syscon pin</abbr>
|-{{cellcolors|#cc3333|#ffffff}}
|-{{cellcolors|#cc3333|#ffffff}}
| 2 || pin1 @ CN101 [[Power Supply]] || VCC || +5V Standby line from power supply connector CN101, the pin named 5V_EVER on motherboard and 5VSB on power supply
| 2 || CN101 [[Power Supply]], pin1 || VCC || +5V Standby line from power supply connector CN101, the pin named 5V_EVER on motherboard and 5VSB on power supply
|-
|-
| rowspan="2" | 3 || rowspan="2" | pin11 @ Syscon [[SW2-30x]] || 2x WHITE LEDs, ground pins || Inner LEDs for EJECT button backlight, with a currentlimitor resistor of 910 {{ohm}}
| rowspan="2" | 3 || rowspan="2" | Syscon [[SW2-30x]], pin 11 || 2x WHITE LEDs, ground pins || Inner LEDs for EJECT button backlight, with a currentlimitor resistor of 910 {{ohm}}
|-
|-
| 2x WHITE LEDs, ground pins || Inner LEDs for POWER button backlight, with a currentlimitor resistor of 1K {{ohm}}
| 2x WHITE LEDs, ground pins || Inner LEDs for POWER button backlight, with a currentlimitor resistor of 1K {{ohm}}
Line 15: Line 15:
| 4 || GND || GND || Ground
| 4 || GND || GND || Ground
|-
|-
| 5 || pin111 @ Syscon [[SW2-30x]] || EJECT switch {{buttoneject}} || Sink to ground to activate
| 5 || Syscon [[SW2-30x]], pin 111 || EJECT switch {{buttoneject}} || Sink to ground to activate
|-
|-
| 6 || pin110 @ Syscon [[SW2-30x]] || POWER switch {{buttonpower}} || Sink to ground to activate
| 6 || Syscon [[SW2-30x]], pin 110 || POWER switch {{buttonpower}} || Sink to ground to activate
|-
|-
| 7 || pin5 @ Syscon [[SW2-30x]] || GREEN LED, ground pin || Connects to left-bottom corner pin (green gnd) of dual red/green LED located next to the power switch, with a currentlimitor resistor of 1K {{ohm}}
| 7 || Syscon [[SW2-30x]], pin 5 || GREEN LED, ground pin || Connects to left-bottom corner pin (green gnd) of dual red/green LED located next to the power switch, with a currentlimitor resistor of 1K {{ohm}}
|-
|-
| 8 || pin6 @ Syscon [[SW2-30x]] || RED LED, ground pin || Connects to left-top corner pin (red gnd) of dual red/green LED located next to the power switch, with a currentlimitor resistor of 1K2 {{ohm}}
| 8 || Syscon [[SW2-30x]], pin 6 || RED LED, ground pin || Connects to left-top corner pin (red gnd) of dual red/green LED located next to the power switch, with a currentlimitor resistor of 1K2 {{ohm}}
|-
|-
| 9 || pin 36 @ BD controller [[CXD5131R-1]] || BLUE LED, ground pin || Connects to blue LED located next to the eject switch, with a currentlimitor resistor of 560 {{ohm}}
| 9 || BD controller [[CXD5131R-1]], pin 36 || BLUE LED, ground pin || Connects to blue LED located next to the eject switch, with a currentlimitor resistor of 560 {{ohm}}
|-{{cellcolors|#333333|#ffffff}}
|-{{cellcolors|#333333|#ffffff}}
| 10 || GND || GND || Ground
| 10 || GND || GND || Ground

Revision as of 22:37, 18 July 2017

HSW-001 Pinout
[edit]
Pin Signal/Connected to Description
On Motherboard On Switch board
1 Syscon SW2-30x, pin 12 4x CONTOUR LEDs, transistor base pin The transistor is located in the switch board and drives 2 LEDs with currentlimitor resistors of 3K Ω (red led at left-top) and 820 Ω (blue led at left-bottom)
The circuit has unpopulated pads to add another transistor and another 2 LEDs for a total of 4 LEDs driven by a misterious syscon pin
2 CN101 Power Supply, pin1 VCC +5V Standby line from power supply connector CN101, the pin named 5V_EVER on motherboard and 5VSB on power supply
3 Syscon SW2-30x, pin 11 2x WHITE LEDs, ground pins Inner LEDs for EJECT button backlight, with a currentlimitor resistor of 910 Ω
2x WHITE LEDs, ground pins Inner LEDs for POWER button backlight, with a currentlimitor resistor of 1K Ω
4 GND GND Ground
5 Syscon SW2-30x, pin 111 EJECT switch PS3 eject button Sink to ground to activate
6 Syscon SW2-30x, pin 110 POWER switch PS3 power button Sink to ground to activate
7 Syscon SW2-30x, pin 5 GREEN LED, ground pin Connects to left-bottom corner pin (green gnd) of dual red/green LED located next to the power switch, with a currentlimitor resistor of 1K Ω
8 Syscon SW2-30x, pin 6 RED LED, ground pin Connects to left-top corner pin (red gnd) of dual red/green LED located next to the power switch, with a currentlimitor resistor of 1K2 Ω
9 BD controller CXD5131R-1, pin 36 BLUE LED, ground pin Connects to blue LED located next to the eject switch, with a currentlimitor resistor of 560 Ω
10 GND GND Ground
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Template:HSW-001_pinout&oldid=45108"