User talk:Sandungas: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
m (→‎BD3527: fixing mistakes from yesterday)
Line 172: Line 172:
! Pin !! Signal !! Description
! Pin !! Signal !! Description
|-
|-
| 1 || ? ||  
| 1 || ? || to 3 smd components to gnd, to electrolitic capacitor 2.5v 330, to 3 sinkholes with a testpoint at the other side
|-
|-
| 2 || ? ||  
| 2 || ? || tied to pin 1
|-
|-
| 3 || ? ||  
| 3 || ? || tied to pin 1
|-
|-
| 4 || ? ||  
| 4 || ? || tied to pin 1
|-
|-
| 5 || ? ||
| 5 || ? || tied to pin 1
|-
|-
| 6 || ? ||  
| 6 || ? || tied to pin 1
|-
|-
| 7 || || control pin ?
| 7 || || capacitor and 1600 ohm resistor to pin 1
|-
|-
| 8 || ? || power
| 8 || ? || diode ? to ground
|-
|-
| 9 || ? || dissapears under package
| 9 || GROUND ||  
|-
|-
| 10 || ? || dissapears under package
| 10 || GROUND ||  
|-{{cellcolors|red}}
|-{{cellcolors|red}}
| 11 || V_IN <!-- not official name --> || to D35653 0S25 pin 8, to BD3525 0938 pin 11
| 11 || V_IN <!-- not official name --> || to D35653 0S25 pin 8, to BD3525 0938 pin 11
Line 198: Line 198:
| 13 || ? || dissapears in a sinkhole (capacitor 915nf to ground in the other side)
| 13 || ? || dissapears in a sinkhole (capacitor 915nf to ground in the other side)
|-
|-
| 14 || GROUND ||  
| 14 || ? || to 3 sinkholes missing at the other side, to 4 sinkholes connected to BD3525 pins 13 up to 20
|-
|-
| 15 || GROUND ||  
| 15 || ? || tied to pin 14
|-
|-
| 16 || GROUND ||  
| 16 || ? || tied to pin 14
|-
|-
| 17 || GROUND ||  
| 17 || ? || tied to pin 14
|-
|-
| 18 || GROUND ||  
| 18 || ? || tied to pin 14
|-
|-
| 19 || GROUND ||  
| 19 || ? || tied to pin 14
|-
|-
| 20 || GROUND ||  
| 20 || ? || tied to pin 14
|-
|-
|}
|}
Line 219: Line 219:
! Pin !! Signal !! Description
! Pin !! Signal !! Description
|-
|-
| 1 || ? || 88 ohm resistor to ground, to 4 sinkholes and to the other side to electrolitic capacitor 2.5v 330 (for ram?)
| 1 || ? || 88 ohm resistor to ground, to a testpoint, to 4 sinkholes and to the other side to electrolitic capacitor 2.5v 330 (very close to a ram chip)
|-
|-
| 2 || ? || tied to pin 1
| 2 || ? || tied to pin 1

Revision as of 20:36, 3 August 2015

Wiki hardware geek

My To Do wiki pages

To fill (by me :P)... list of pages i started or i helped improving them but are not finished yet, with a temporal layout, needs a cleanup, or abandoned temporally for some reason.

PARAM.SFO

Neverending oddisey

PARAM.PFD

Dunno how

ETC...

I will make a better list when i find some time, sorry

  • About changes in CXML decompiler: yes, correct.

--Flatz (talk) 16:26, 17 November 2014 (EST)

Dev_flash\vsh\resource\sysconf\calibration

dev_flash\vsh\resource\sysconf\calibration
[edit]
Filename Version Size MD5 Remarks
01.png 01.png 3.40-4.91 46611 c08832aa1fdeecf8bf95986d22766a31
02.png 02.png 3.40-4.91 10766 35859247d2b3548c879d805e6d2b80e8
03.png 03.png 3.40-4.91 45806 9e0b454ee894bfe9052279f08e2c68c4
04.png 04.png 3.40-4.91 12972 098ee01d7a75c454349e649e954078b5
05.png 05.png 3.40-4.91 20260 0ab33e75f1bc9effdf9afbcfc0dee048
06.png 06.png 3.40-4.91 10045 d02dfdb83292014ac3a0fab819f3ef8d
07.png 07.png 3.40-4.91 21912 c7130cf54ccd5ec99c48923f60899f91
08.png 08.png 3.40-4.91 13720 b3615e8f13f1e8982508d53b07a1a4b6
09.png 09.png 3.40-4.91 21264 e536ea25f671416ba8863d7f5931c601
10.png 10.png 3.40-4.91 14383 14d88c0a31dd1247485d31885f60345b
11.png 11.png 3.40-4.91 21600 31d8666d65f21f96c47327a9ee8ecf96
Line.png line.png 3.40-4.91 12793 f8c8a41f6a1d751fb017dce627ea8383

Note: no variants


is not yet on an article page?

Dev_flash\vsh\resource\explore\user

dev_flash\vsh\resource\explore\user
[edit]
Filename Version Size MD5 Remarks
000.png 000.png 1.00-4.91 8732 782383150fe84e4860d26114bc84eac6
001.png 001.png 1.00-4.91 8692 89c5f403c53f58599c99b3fa8c09f0c5
002.png 002.png 1.00-4.91 8314 5e4d7d44fa2ac8f1467abdd01680beb5
003.png 003.png 1.00-4.91 7599 eb32cd2ec540958a809186e1dae626e8
004.png 004.png 1.00-4.91 9590 0dda6f66eb49006dda8d8b5f64721fd7
005.png 005.png 1.00-4.91 10141 a682913b618dfa18fa858e3220096189
006.png 006.png 1.00-4.91 9761 08d2e916bb6c3cf1131f5dc0db8bd873
007.png 007.png 1.00-4.91 10818 8c3fd52c7060cb9b7f1630e7a8244452
008.png 008.png 1.00-4.91 10013 ad647ab5f7a3a7654d69073d57e2df19
009.png 009.png 1.00-4.91 2297 2979b1a3f321453f8dd32b87d6af26ae
010.png 010.png 1.00-4.91 2784 97b1383a45b127f4b961a41e46725763
011.png 011.png 1.00-4.91 4138 3bbbf0ab68a1f6319a802f9c4413c3b8
012.png 012.png 1.00-4.91 3063 4c2a7f17c0ec6d5919168591a6ea6116
013.png 013.png 1.00-4.91 3489 e2a625b8e3229b4fd3d8cf98a4bd164b
014.png 014.png 1.00-4.91 3162 28ff7495ce9da4026766d88e9a9105da
015.png 015.png 1.00-4.91 3388 1cfac53ebec607ba2b559203f6d79eea
016.png 016.png 1.00-4.91 4305 3b7642247edcc4a1bc3ac999f20be729
017.png 017.png 1.00-4.91 3920 72ed5f6e7ad644fc26865dd589b71fa7
018.png 018.png 1.00-4.91 16597 267fc9f686987fb329c5494907941d8f
019.png 019.png 1.00-4.91 17617 0f9efaef8626de4baac4e850ff43e494
020.png 020.png 1.00-4.91 16912 91304828046ef81a769911417ef8de27
021.png 021.png 1.00-4.91 16595 37ca85996c2f0c3d9d4310882fb9f9bb
022.png 022.png 1.00-4.91 18742 0e801b22adc8e7e4262490c6f1a1eda4
023.png 023.png 1.00-4.91 18387 115cd081bea9622f1105210bf4857124
024.png 024.png 1.00-4.91 18016 9a2597dee82c144375ae95630c554fc3
025.png 025.png 1.00-4.91 18551 5d729a8ac9f052135393434cf5d16b70
026.png 026.png 1.00-4.91 17346 d72fd0c1a810ce6138e314010f15795b

Note: no variants


is not yet on an article page

Users suggestions, brainstormings, help, etc...

HDD regions table

ps3dd HDD region is between 8 sectors of padding, in the space leaved empty by resizing ps3da, see how: http://gitorious.ps3dev.net/ps3otheros/scripts/blobs/master/create_hdd_region.sh
The script is a facility to create a next region on free (from regions) space on HDD, with GameOS rights: same script for ALL models, it needs new drivers and new ps3sed.

ps3disk sb_03: accessible region 0 start 0 size 1250263728		//ps3da
ps3disk sb_03: accessible region 1 start 32 size 1212515008		//ps3db
ps3disk sb_03: accessible region 2 start 1212515040 size 4194296	//ps3dc
ps3disk sb_03: accessible region 3 start 1216709344 size 33554376	//ps3dd
ps3disk sb_03: ps3stor_probe_access:132: 4 accessible regions found

32 + 1212515008 = 1212515040		//ps3db end sector
1212515040 + 4194296 = 1216709336	//ps3dc end sector
1216709344 - 1216709336 = 8		//ps3dd begin pad
1216709344 + 33554376 = 1250263720	//ps3dd end sector
1250263728 - 1250263720 = 8		//ps3dd ending pad

note: no gap between GameOS regions
  • I added the padding you point of 0x8 sectors at the end of the table, and i also added some notes out of the table about the differences of padding between official layout and other methods (and maybe differences between NAND/NOR models)... is hard to know or represent in the table because there are differeces in the info people posted (included your displacement of 0x20 sectors before ps3db in your NAND console, that doesnt seems to match the total displacement of 0x18 sectors in graf NOR notes). By now for me this "small" problem with innacurate paddings in the table is fine (no idea if can be solved by modding an script of driver config), overall it looks the whole hdd is mapped so i finished with the table by now, the most important think to know about this areas out of the regions was to be sure if are padding (not other important data) --Sandungas (talk) 19:00, 1 April 2014 (EDT)

This table is copyed from: Hypervisor_Reverse_Engineering#HDD_device (i added the grey rows and usage column). The console was a NOR model (because it has vflash region) and in a firmware under 3.21 (because it has otheros region)

Region Index Start sector Number of sectors Usage
0 0x0 0x950F8B0 whole hdd
0x8 HDD Partition table
1 0x8 0x80000 vflash
0x10 Padding ? (0x80018 - 0x80000 - 0x8 = 0x10)
2 0x80018 0x7C8F898 gameos
0x8 Padding (0x7D0F8B8 - 0x7C8F898 - 0x80018 = 0x8)
3 0x7D0F8B8 0x3FFFF8 gameos cache
0x8 Padding (0x810F8B8 - 0x3FFFF8 - 0x7D0F8B8 = 0x8)
4 0x810F8B8 0x13FFFF8 otheros
5 - - -
6 - - -
7 - - -

‎HSW-001 pinout

please check this if you have a chance Zer0Tolerance, on CECH-25xx the BD controller is integrated and it seems the blue eject led is connected to it --Sandungas (talk) 15:55, 20 June 2015 (UTC)

Verifyed, pin36 @CXD5131R-1 is correct pin. Now we need to trace it on JTP-001 (@Renesas chip)

I cant check a JTP-001 at this moment, by now im assuming the CXD5131R-1 and the renesas R8J32830FPV1 has the same pinout and internally are exactly the same, actually i have a partial theory about why there are renesas BD controllers used in some PS3 models. It seems when sony is going to redesign the BD controller they uses renesas for the first prototype (though renesas chip reaches production line). Or maybe is the opposite, first sony redesigns the BD controller and then they passes the manufacturing license to renesas for building it cheaper, to reduce taxes or something like that. One way or the other it seems renesas BD controllers works exactly the same as sony BD controllers --Sandungas (talk) 15:55, 20 June 2015 (UTC)


Components

D35653 0S25

Next to NOR, on top of the board JSD-001, responsible of the NOR VCC

Pin Signal Description
1 V_OUT capacitor and 180 ohm resistor to ground... then to 4 sinkholes and at the other side NOR VCC 3.3v (testpoint)
2 GROUND
3 GROUND
4 capacitor to ground
5 Dissapears in a sinkhole and emerges near syscon, connected to SWx-x pin 50
6 GROUND
7 GROUND
8 V_IN to BD3527 0A95 pin 11, to BD3525 0938 pin 11

BD3525

Pin Signal Description
1 ? to 4 sinkholes... at the other side to electrolitic capacitor 2.5v 330
2 ? tied to pin 1
3 ? tied to pin 1
4 ? tied to pin 1
5 ? tied to pin 1
6 ? tied to pin 1
7 diode to ground, and capacitor to ground, and diode to 55.8 ohm resistor to pin 1
8 ? capacitor to ground
9 GROUND
10 GROUND
11 V_IN to D35653 0S25 pin 8, to BD3527 0A95 pin 11
12 ? 46Kohm resistor to ground, and a trace that dissapears in a sinkhole and emerges near syscon, connected to SWx-x pin 52
13 ? 0.400mf capacitor to ground
14 GROUND
15 GROUND
16 GROUND
17 GROUND
18 GROUND
19 GROUND
20 GROUND

BD3527

There are 2 BD3527 on JSD-001 motherboard, one near flash and the other near usb connectors

near flash

Pin Signal Description
1 ? to 3 smd components to gnd, to electrolitic capacitor 2.5v 330, to 3 sinkholes with a testpoint at the other side
2 ? tied to pin 1
3 ? tied to pin 1
4 ? tied to pin 1
5 ? tied to pin 1
6 ? tied to pin 1
7 capacitor and 1600 ohm resistor to pin 1
8 ? diode ? to ground
9 GROUND
10 GROUND
11 V_IN to D35653 0S25 pin 8, to BD3525 0938 pin 11
12 ? dissapears in a sinkhole (resistor 23Kohm to ground in the other side)
13 ? dissapears in a sinkhole (capacitor 915nf to ground in the other side)
14 ? to 3 sinkholes missing at the other side, to 4 sinkholes connected to BD3525 pins 13 up to 20
15 ? tied to pin 14
16 ? tied to pin 14
17 ? tied to pin 14
18 ? tied to pin 14
19 ? tied to pin 14
20 ? tied to pin 14

near usb

Pin Signal Description
1 ? 88 ohm resistor to ground, to a testpoint, to 4 sinkholes and to the other side to electrolitic capacitor 2.5v 330 (very close to a ram chip)
2 ? tied to pin 1
3 ? tied to pin 1
4 ? tied to pin 1
5 ? tied to pin 1
6 ? tied to pin 1
7 ? capacitor and 1600 ohm resistor to pin 1
8 ? diode ? to ground
9 GROUND
10 GROUND
11 V_IN to D35653 0S25 pin 8, to BD3525 0938 pin 11
12 ? 42k ohm resistor to ground, and to a sinkhole that dissapears in the other side.....................
13 ? 1000nf capacitor to ground
14 ? capacitor to ground, to 4 sinkholes missing in the other side... not found
15 ? tied to pin 14
16 ? tied to pin 14
17 ? tied to pin 14
18 ? tied to pin 14
19 ? tied to pin 14
20 ? tied to pin 14

BD9684 0906

Pin Signal Description
1 ? sealed coil... then to 8 sinkholes... to BD controller, etc...
2 ? dissapears under package
3 V_? 0.400mf capacitor to ground... then to 4 sinkholes... at the other side conneced to fuse/thermistor TH7601
4 ? to a sinkhole... at the other side 3.3K resistor to ground, then connected to pins 2 and 3 of a dual transistor (base of TR1, and collector of TR2)
5 GROUND
6 GROUND
7 dissapears under package
8 V_? 0.400mf capacitor to ground... then to the same 4 sinkholes of pin 3
9 ? dissapears under package
10 ? sealed coil... then tied to pin 11
11 ? to 6 sinkholes... at the other side to unpopulated service connector... etc...
12 ? tied to pin 13... capacitor to ground, to a 4x-sinkhole... then to BD controller
13 ? tied to pin 12... capacitor to ground, to a 4x-sinkhole... then to BD controller
14 GROUND
15 ? to a sinkhole... at the other side to BD controller
16 ? dissapears under package
17 V_? 0.400mf capacitor to ground... then to a sinkhole and tied to pin 3
18 ? towards blu ray laser connector
19 ? tied to pin 1
20 ? to a sinkhole... then to pin 6 of the same dual transistor (collector of TR1)
  • pin 5 of the dual transistor (base of TR2) is connected to a long trace that dies in a sinkhole and emerges under syscon, connected to SWx-x pin 42
  • the emitter pins of the dual transistor (1 and 4) are connected to a common ground
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=User_talk:Sandungas&oldid=38523"