Template talk:Syscon pinout LQFP 100 pins: Difference between revisions
Jump to navigation
Jump to search
(Created page with "== Legends == === NEC Renesas names === * ANIxx: Analog input * ANOxx: Analog output * ASTB: Address strobe * AVREFx: Analog reference voltage * AVSS: Analog ground * CLKOUT:...") |
No edit summary |
||
| Line 3: | Line 3: | ||
* ANIxx: Analog input | * ANIxx: Analog input | ||
* ANOxx: Analog output | * ANOxx: Analog output | ||
* AVREFx: Analog reference voltage | * AVREFx: Analog reference voltage | ||
* AVSS: Analog ground | * AVSS: Analog ground | ||
* EVDDx: Power supply for port | * EVDDx: Power supply for port | ||
* EVSSx: Ground for port | * EVSSx: Ground for port | ||
* EXCLK: External clock input(main system clock) | * EXCLK: External clock input(main system clock) | ||
* EXLVI: External potential input for low-voltage detector | * EXLVI: External potential input for low-voltage detector | ||
| Line 30: | Line 27: | ||
* P150-P157: Port 15 | * P150-P157: Port 15 | ||
* PCLBUZx: Programmable clock output/buzzer output | * PCLBUZx: Programmable clock output/buzzer output | ||
* REGC: Regulator capacitance | * REGC: Regulator capacitance | ||
* RESET: Reset | * RESET: Reset | ||
| Line 49: | Line 45: | ||
* VDD: Power supply | * VDD: Power supply | ||
* VSS: Ground | * VSS: Ground | ||
* | * X1, X2: Crystal oscillator (main system clock) | ||
* XT1, XT2: Crystal oscillator (subsystem clock) | |||
''External Memory BUS INTERFACE pin function names (optional, it seems syscon doesnt uses it)'' | |||
* EXxx: External extension bus | |||
* RD: Read strobe | |||
* WR0: Lower byte write strobe | * WR0: Lower byte write strobe | ||
* WR1: Upper byte write strobe | * WR1: Upper byte write strobe | ||
* | * CLKOUT: Clock output | ||
* | * WAIT: Wait | ||
* ASTB: Address strobe | |||
Revision as of 07:47, 5 June 2022
Legends
NEC Renesas names
- ANIxx: Analog input
- ANOxx: Analog output
- AVREFx: Analog reference voltage
- AVSS: Analog ground
- EVDDx: Power supply for port
- EVSSx: Ground for port
- EXCLK: External clock input(main system clock)
- EXLVI: External potential input for low-voltage detector
- FLMD0: Flash programming mode
- INTPxx: External interrupt input
- KRx: Key return
- P00-P06: Port 0
- P10-P17: Port 1
- P20-P27: Port 2
- P30-P31: Port 3
- P40-P47: Port 4
- P50-P57: Port 5
- P60-P67: Port 6
- P70-P77: Port 7
- P80-P87: Port 8
- P110-P111: Port 11
- P120-P124: Port 12
- P130-P131: Port 13
- P140-P145: Port 14
- P150-P157: Port 15
- PCLBUZx: Programmable clock output/buzzer output
- REGC: Regulator capacitance
- RESET: Reset
- RTC1HZ: Real-time counter correction clock (1 Hz) output
- RTCCL: Real-time counter clock (32 kHz original oscillation) output
- RTCDIV: Real-time counter clock (32 kHz divided frequency) output
- RxDx: Receive data
- SCKxx: Serial clock input/output
- SCLxx: Serial clock input/output
- SDAxx: Serial data input/output
- SIxx: Serial data input
- SOxx: Serial data output
- TIxx: Timer input
- TOxx: Timer output
- TOOL0: Data input/output for tool
- TOOL1: Clock output for tool
- TxDx: Transmit data
- VDD: Power supply
- VSS: Ground
- X1, X2: Crystal oscillator (main system clock)
- XT1, XT2: Crystal oscillator (subsystem clock)
External Memory BUS INTERFACE pin function names (optional, it seems syscon doesnt uses it)
- EXxx: External extension bus
- RD: Read strobe
- WR0: Lower byte write strobe
- WR1: Upper byte write strobe
- CLKOUT: Clock output
- WAIT: Wait
- ASTB: Address strobe