Talk:Hardware flashing

Testreport table

Board	Flash	Dumping	Writing	Remarks
COK-001	2x Samsung K9F1G08U0A-PIB0
COK-002	2x Samsung K9F1G08U0A-PIB0
SEM-001	2x Samsung K9F1G08UOB-PIB0
DIA-001	1x Spansion S29GL128N90TFIR2
DIA-002	1x Spansion S29GL128N90TFIR2
VER-001	1x Spansion S29GL128P90TFIR2
VER-001	1x Samsung K8Q2815UQB-PI4B
DYN-001	1x Samsung K8Q2815UQB-PI4B
DYN-001	1x Macronix MX29GL128ELT2I-90G
JTP-001	1x Spansion S29GL128P90TFIR2
JSD-001
KTE-001	1x Spansion S29GL128P90TFIR2
KTE-001	1x Macronix MX29GL128ELT2I-90G
EXA-MPLE	1x dummy	Yes	No	Tried 128/128 and 4K/4096, resistor and A/B trick, always freezes on first sector

NAND

NAND (256MB, old FAT models, needs 32 wires, 15 per NAND + GND + VCC)
2 chips: Samsung K9F1G08U0A-PIB0

• http://www.uchobby.com/index.php/2007/05/05/read-embedded-flash-chips/

• NAND_Dumper_Extractor.rar (1.55 MB)

FlowRebuilder v.4.1.0.0

---

NOR

NOR 16MB, newer FAT models + Slims
needs 44 I/O wires: 23 address lines:A0-A22 + 16 Data lines:D0-D15 + 5 control lines: CE#,OE#,WE#,RESET#,TRISTATE (optional:#RY-BY) + GND + VCC
(NB: RY/BY is optional only for Teensy, Progskeet NEED ALL controllines!)

1 chip: Spansion S29GL128N90TFIR2 or Samsung K8Q2815UQB-P14B

NOR uses 1024 byte sector, just as NAND.

• noralizer.rar (9.95 MB) incl. 2 different FAT models (CECHL04-jestero + CECH?-Phiren) pads labeled

• joohan USBbitbanger on AVR for NOR flashing.rar (1.17 MB) (original topic @psx-scene)

• spansion programmer (PIC based)

• NORway for Teensy++ 2.0
  • NORway Teensy / NORway_v0.1.zip

---

• http://git-hacks.com/atnorflash/atnorflash

• http://hotfile.com/dl/118618929/f6914e0/ps3flasher.tgz.html (note: older version)

---

Alternatives for Infectus2 and Teensy 2.0++:

• Progskeet (UF6667) : http://twitpic.com/5pk6dz // http://fronttowardsgamer.com/2011/07/15/exclusive-hacker-talks-progskeet-geohot-and-why-he-doesnt-give-a-sht-about-sony/
  • quad NAND with Progskeet: http://subirimg.com/images/img2065.jpg

---

Atmel AT90USB1286 datasheet