Template talk:Syscon pinout LQFP 100 pins: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
(Created page with "== Legends == === NEC Renesas names === * ANIxx: Analog input * ANOxx: Analog output * ASTB: Address strobe * AVREFx: Analog reference voltage * AVSS: Analog ground * CLKOUT:...")
 
No edit summary
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
== Legends ==
== Legends ==
=== NEC Renesas names ===
=== NEC Renesas names ===
''Control''
* FLMD0: Flash programming mode
* RESET: Reset
* TOOL0: Data input/output for tool
* TOOL1: Clock output for tool
''Data''
* ANIxx: Analog input
* ANIxx: Analog input
* ANOxx: Analog output
* ANOxx: Analog output
* ASTB: Address strobe
* AVREFx: Analog reference voltage
* AVSS: Analog ground
* CLKOUT: Clock output
* EVDDx: Power supply for port
* EVSSx: Ground for port
* EXxx: External extension bus
* EXCLK: External clock input(main system clock)
* EXLVI: External potential input for low-voltage detector
* FLMD0: Flash programming mode
* INTPxx: External interrupt input
* INTPxx: External interrupt input
* KRx: Key return
* KRx: Key return
* RxDx: Receive data
* SCKxx: Serial clock input/output
* SCLxx: Serial clock input/output
* SDAxx: Serial data input/output
* SIxx: Serial data input
* SOxx: Serial data output
* TIxx: Timer input
* TOxx: Timer output
* TxDx: Transmit data
''Ports''
* P00-P06: Port 0
* P00-P06: Port 0
* P10-P17: Port 1
* P10-P17: Port 1
Line 29: Line 37:
* P140-P145: Port 14
* P140-P145: Port 14
* P150-P157: Port 15
* P150-P157: Port 15
''Power''
* AVREFx: Analog reference voltage
* AVSS: Analog ground
* EVDDx: Power supply for port
* EVSSx: Ground for port
* EXCLK: External clock input(main system clock)
* EXLVI: External potential input for low-voltage detector
* REGC: Regulator capacitance
* VDD: Power supply
* VSS: Ground
''Others''
* PCLBUZx: Programmable clock output/buzzer output
* PCLBUZx: Programmable clock output/buzzer output
* RD: Read strobe
* REGC: Regulator capacitance
* RESET: Reset
* RTC1HZ: Real-time counter correction clock (1 Hz) output
* RTC1HZ: Real-time counter correction clock (1 Hz) output
* RTCCL: Real-time counter clock (32 kHz original oscillation) output
* RTCCL: Real-time counter clock (32 kHz original oscillation) output
* RTCDIV: Real-time counter clock (32 kHz divided frequency) output
* RTCDIV: Real-time counter clock (32 kHz divided frequency) output
* RxDx: Receive data
* X1, X2: Crystal oscillator (main system clock)
* SCKxx: Serial clock input/output
* XT1, XT2: Crystal oscillator (subsystem clock)
* SCLxx: Serial clock input/output
 
* SDAxx: Serial data input/output
''EXTERNAL Memory BUS INTERFACE pin function names (optional, it seems syscon doesnt uses it)''
* SIxx: Serial data input
* EX0-EX31: External extension bus
* SOxx: Serial data output
* RD: Read strobe
* TIxx: Timer input
* TOxx: Timer output
* TOOL0: Data input/output for tool
* TOOL1: Clock output for tool
* TxDx: Transmit data
* VDD: Power supply
* VSS: Ground
* WAIT: Wait
* WR0: Lower byte write strobe
* WR0: Lower byte write strobe
* WR1: Upper byte write strobe
* WR1: Upper byte write strobe
* X1, X2: Crystal oscillator (main system clock)
* CLKOUT: Clock output
* XT1, XT2: Crystal oscillator (subsystem clock)
* WAIT: Wait
* ASTB: Address strobe

Latest revision as of 08:00, 5 June 2022

Legends[edit source]

NEC Renesas names[edit source]

Control

  • FLMD0: Flash programming mode
  • RESET: Reset
  • TOOL0: Data input/output for tool
  • TOOL1: Clock output for tool

Data

  • ANIxx: Analog input
  • ANOxx: Analog output
  • INTPxx: External interrupt input
  • KRx: Key return
  • RxDx: Receive data
  • SCKxx: Serial clock input/output
  • SCLxx: Serial clock input/output
  • SDAxx: Serial data input/output
  • SIxx: Serial data input
  • SOxx: Serial data output
  • TIxx: Timer input
  • TOxx: Timer output
  • TxDx: Transmit data

Ports

  • P00-P06: Port 0
  • P10-P17: Port 1
  • P20-P27: Port 2
  • P30-P31: Port 3
  • P40-P47: Port 4
  • P50-P57: Port 5
  • P60-P67: Port 6
  • P70-P77: Port 7
  • P80-P87: Port 8
  • P110-P111: Port 11
  • P120-P124: Port 12
  • P130-P131: Port 13
  • P140-P145: Port 14
  • P150-P157: Port 15

Power

  • AVREFx: Analog reference voltage
  • AVSS: Analog ground
  • EVDDx: Power supply for port
  • EVSSx: Ground for port
  • EXCLK: External clock input(main system clock)
  • EXLVI: External potential input for low-voltage detector
  • REGC: Regulator capacitance
  • VDD: Power supply
  • VSS: Ground

Others

  • PCLBUZx: Programmable clock output/buzzer output
  • RTC1HZ: Real-time counter correction clock (1 Hz) output
  • RTCCL: Real-time counter clock (32 kHz original oscillation) output
  • RTCDIV: Real-time counter clock (32 kHz divided frequency) output
  • X1, X2: Crystal oscillator (main system clock)
  • XT1, XT2: Crystal oscillator (subsystem clock)

EXTERNAL Memory BUS INTERFACE pin function names (optional, it seems syscon doesnt uses it)

  • EX0-EX31: External extension bus
  • RD: Read strobe
  • WR0: Lower byte write strobe
  • WR1: Upper byte write strobe
  • CLKOUT: Clock output
  • WAIT: Wait
  • ASTB: Address strobe
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Template_talk:Syscon_pinout_LQFP_100_pins&oldid=66890"