Template:Syscon pinout LQFP 100 pins: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
No edit summary
(Some new colors, inherited from Template:Syscon_pinout_LQFP_128_pins)
Line 22: Line 22:
| 5 || 4 || P47/INTP2 ||  || ←I/O→ || BT_WAKEON ??? Connected to Wifi/BT module ??? (BT_WAKEON ? or BT_RESET ?) ||  
| 5 || 4 || P47/INTP2 ||  || ←I/O→ || BT_WAKEON ??? Connected to Wifi/BT module ??? (BT_WAKEON ? or BT_RESET ?) ||  
|-
|-
| 6 || 4 || P46/INTP1/TI05/TO05 || BUZZER || ←I/O→ || Connected to the Buzzer through a transistor || 3.3V Running
| 6 || 4 || {{cellcolors|#246|#fff}} TO05 || BUZZER || {{pino}} || Connected to the Buzzer through a transistor ||  
|-
|-
| 7 || 4 || P45/SO01 ||  || ←I/O→ || Connected to South Bridge CXD9963GB ? (SB_SPI_DO) || 3.3V Running
| 7 || 4 || P45/SO01 ||  || ←I/O→ || Connected to South Bridge CXD9963GB ? (SB_SPI_DO) || 3.3V Running
Line 32: Line 32:
| 10 || 4 || P42/TI04/TO04 ||  || ←I/O→ || Connected to South Bridge CXD9963GB ? (SB_SPI_CS) || 3.3V Running
| 10 || 4 || P42/TI04/TO04 ||  || ←I/O→ || Connected to South Bridge CXD9963GB ? (SB_SPI_CS) || 3.3V Running
|-
|-
| 11 || 4 || {{cellcolors|#aa7744}} TOOL1 || TOOL_CLK || ←I/O→ || Connected to Service Connector 3rd Gen. pin 13 (Tool clock) through a missing resistor ? || 3.3V Running
| 11 || 4 || {{cellcolors|#a74}} TOOL1 || TOOL_CLK || ? || Connected to Service Connector 3rd Gen. pin 13 (Tool clock) through a missing resistor ? || 3.3V Running
|-
|-
| 12 || 4 || {{cellcolors|#aa7744}} TOOL0 || TOOL_DAT || ←I/O→ || Connected to Service Connector 3rd Gen. pin 7 (Tool Data) through a missing resistor ? || 3.3V Running
| 12 || 4 || {{cellcolors|#a74}} TOOL0 || TOOL_DAT || {{pinio}} || Connected to Service Connector 3rd Gen. pin 7 (Tool Data) through a missing resistor ? || 3.3V Running
|-
|-
| 13 || data-sort-value="17"| || {{cellcolors|#aa7744}} <span style="text-decoration: overline;">RESET</span> || RESET || ←I ||  || 3.3V Running
| 13 || data-sort-value="17"| || {{cellcolors|#a74}} <span style="text-decoration: overline;">RESET</span> || RESET || {{pini}} ||  || 3.3V Running
|-
|-
| 14 || 12 || {{cellcolors|#ff77bb}} XT2 || OSCOUT || ←I || Subsystem clock. Connected to a big black crystal. Amplitude (32.768Khz?) || 1.2V Standby 1.2V Running
| 14 || 12 || {{cellcolors|#555|#fff}} XT2 || OSCOUT || {{pino}} || Subsystem clock. Connected to a big black crystal. Amplitude (32.768Khz?) || 1.2V Standby 1.2V Running
|-
|-
| 15 || 12 || {{cellcolors|#ff77bb}} XT1 || OSCIN || ←I || Subsystem clock. Connected to a big black crystal. Amplitude (32.768Khz?) || 0.80V Running
| 15 || 12 || {{cellcolors|#555|#fff}} XT1 || OSCIN || {{pini}} || Subsystem clock. Connected to a big black crystal. Amplitude (32.768Khz?) || 0.80V Running
|-
|-
| 16 || data-sort-value="17"| || {{cellcolors|#aa7744}} FLMD0 || FLASH_MODE || - ||  || 3.3V Standby 3.3V Running
| 16 || data-sort-value="17"| || {{cellcolors|#a74}} FLMD0 || FLASH_MODE || {{pini}} ||  || 3.3V Standby 3.3V Running
|-  
|-  
| 17 || 12 || {{cellcolors|#ff77bb}} X2 || XTAL || ←I || Main system clock. Connected to a white ceramic crystal marked "ED" or "EU" ||  
| 17 || 12 || {{cellcolors|#555|#fff}} X2 || XTAL || {{pino}} || Main system clock. Connected to a white ceramic crystal marked "ED" or "EU" ||  
|-
|-
| 18 || 12 || {{cellcolors|#ff77bb}} X1 || EXTAL || ←I || Main system clock. Connected to a white ceramic crystal marked "ED" or "EU" ||  
| 18 || 12 || {{cellcolors|#555|#fff}} X1 || EXTAL || {{pini}} || Main system clock. Connected to a white ceramic crystal marked "ED" or "EU" ||  
|-
|-
| 19 || data-sort-value="18"| || {{cellcolors|#ff9933}} REGC || VREG_CAP || - ||  || 2.5V Running
| 19 || data-sort-value="18"| || {{cellcolors|#f93}} REGC || VREG_CAP || {{pin}} ||  || 2.5V Running
|-
|-
| 20 || data-sort-value="20"| || {{cellcolors|#333333|#ffffff}} V<span style="font-size:60%;">SS</span> || GND || - ||  ||  
| 20 || data-sort-value="20"| || {{cellcolors|#333|#fff}} V<span style="font-size:60%;">SS</span> || GND || {{pin}} ||  ||  
|-
|-
| 21 || data-sort-value="20"| || {{cellcolors|#333333|#ffffff}} EV<span style="font-size:60%;">SS0</span> || GND || - ||  ||  
| 21 || data-sort-value="20"| || {{cellcolors|#333|#fff}} EV<span style="font-size:60%;">SS0</span> || GND || {{pin}} ||  ||  
|-
|-
| 22 || data-sort-value="19"| || {{cellcolors|#ff3333|#ffffff}} V<span style="font-size:60%;">DD</span> || 3.3_EVER_B || - ||  || 3.3V Standby 3.3V Running
| 22 || data-sort-value="19"| || {{cellcolors|#f33|#fff}} V<span style="font-size:60%;">DD</span> || 3.3_EVER_B || {{pin}} ||  || 3.3V Standby 3.3V Running
|-
|-
| 23 || data-sort-value="19"| || {{cellcolors|#ff3333|#ffffff}} EV<span style="font-size:60%;">DD0</span> || 3.3_EVER_B || - ||  || 3.3V Standby 3.3V Running
| 23 || data-sort-value="19"| || {{cellcolors|#f33|#fff}} EV<span style="font-size:60%;">DD0</span> || 3.3_EVER_B || {{pin}} ||  || 3.3V Standby 3.3V Running
|-
|-
| 24 || 6 || P60/SCL0 || MK_I2C_SCL ? || ←I/O→ || Connected to Texas Instruments-SCEI Clock Generator CDC972 pin 37 ??? ||  
| 24 || 6 || P60/SCL0 || MK_I2C_SCL ? || ←I/O→ || Connected to Texas Instruments-SCEI Clock Generator CDC972 pin 37 ??? ||  
Line 106: Line 106:
| 42 || 0 || P05/CLKOUT ||  || ←I/O→ || 45K resistor to GND ? || 3.3V Running
| 42 || 0 || P05/CLKOUT ||  || ←I/O→ || 45K resistor to GND ? || 3.3V Running
|-
|-
| 43 || data-sort-value="20"| || {{cellcolors|#333333|#ffffff}} EV<span style="font-size:60%;">SS1</span> || GND || - ||  ||  
| 43 || data-sort-value="20"| || {{cellcolors|#333|#fff}} EV<span style="font-size:60%;">SS1</span> || GND || {{pin}} ||  ||  
|-
|-
| 44 || 8 || P80/EX0 ||  || ←I/O→ ||  ||  
| 44 || 8 || P80/EX0 ||  || ←I/O→ ||  ||  
Line 136: Line 136:
| 52 || 3 || P30/INTP3/RTC1HZ ||  || ←I/O→ ||  || 3.3V Running
| 52 || 3 || P30/INTP3/RTC1HZ ||  || ←I/O→ ||  || 3.3V Running
|-
|-
| 53 || data-sort-value="19"| || {{cellcolors|#ff3333|#ffffff}} EV<span style="font-size:60%;">DD1</span> || 3.3_EVER_B || - ||  || 3.3V Standby 3.3V Running
| 53 || data-sort-value="19"| || {{cellcolors|#f33|#fff}} EV<span style="font-size:60%;">DD1</span> || 3.3_EVER_B || {{pin}} ||  || 3.3V Standby 3.3V Running
|-
|-
| 54 || 5 || P50/EX8 ||  || ←I/O→ ||  || 3.3V Running
| 54 || 5 || P50/EX8 ||  || ←I/O→ ||  || 3.3V Running
Line 142: Line 142:
| 55 || 5 || P51/EX9 ||  || ←I/O→ ||  ||  
| 55 || 5 || P51/EX9 ||  || ←I/O→ ||  ||  
|-
|-
| 56 || 5 || {{cellcolors|#408040|#ffffff}} P52/EX10 || WIFI_CTRL || ←I/O→ || 10k resistor to GND, and to wifi/BT module. See: [[Media:KTE-001_wifitraces.jpg|wifi/BT 10x7 pinout]] or [[Media:REX-001_wifitraces.jpg|wifi/BT 9x7 pinout]] || Variable V Standby 3.3V Running
| 56 || 5 || {{cellcolors|#d9f|#fff}} P52/EX10 || WIFI_CTRL || ←I/O→ || 10k resistor to GND, and to wifi/BT module. See: [[Media:KTE-001_wifitraces.jpg|wifi/BT 10x7 pinout]] or [[Media:REX-001_wifitraces.jpg|wifi/BT 9x7 pinout]] || Variable V Standby 3.3V Running
|-
|-
| 57 || 5 || {{cellcolors|#aa7744}} P53/EX11 || SC_RX || ←I/O→ || Syscon UART. Connected to service connector ? ||  
| 57 || 5 || {{cellcolors|#a74}} P53 || UART0_RxD || {{pini}} || Syscon UART. Connected to service connector ? ||  
|-
|-
| 58 || 5 || {{cellcolors|#aa7744}} P54/EX12 || SC_TX || ←I/O→ || Syscon UART. Connected to service connector ? || Variable V Standby 3.3V Running
| 58 || 5 || {{cellcolors|#a74}} P54 || UART0_TxD || {{pino}} || Syscon UART. Connected to service connector ? || Variable V Standby 3.3V Running
|-
|-
| 59 || 5 || P55/EX13 ||  || ←I/O→ ||  || 3.3V Running
| 59 || 5 || P55/EX13 ||  || ←I/O→ ||  || 3.3V Running
Line 170: Line 170:
| 69 || 1 || {{cellcolors|#33f|#fff}} <span style="text-decoration: overline;">SCK00</span> || RSX_SPI_CLK || {{pino}} || Connected to [[RSX]] pad BA6 ([[Template:RSX pad layout 41x41|RSX layout 41x41]]), or pad <abbr title="Unknown>UNK</abbr> ([[Template:RSX_pad_layout_34x34|RSX layout 34x34]]) ||  
| 69 || 1 || {{cellcolors|#33f|#fff}} <span style="text-decoration: overline;">SCK00</span> || RSX_SPI_CLK || {{pino}} || Connected to [[RSX]] pad BA6 ([[Template:RSX pad layout 41x41|RSX layout 41x41]]), or pad <abbr title="Unknown>UNK</abbr> ([[Template:RSX_pad_layout_34x34|RSX layout 34x34]]) ||  
|-
|-
| 70 || data-sort-value="19"| || {{cellcolors|#ff3333|#ffffff}} AV<span style="font-size:60%;">REF1</span> ||  || - ||  || 1.5V Running
| 70 || data-sort-value="19"| || {{cellcolors|#f33|#fff}} AV<span style="font-size:60%;">REF1</span> ||  || {{pin}} ||  || 1.5V Running
|-
|-
| 71 || 11 || P110/ANO0 ||  || ←I/O→ || Connected to a testpad ||  
| 71 || 11 || P110/ANO0 ||  || ←I/O→ || Connected to a testpad ||  
Line 176: Line 176:
| 72 || 11 || {{cellcolors|#33f|#e77}} P111/ANO1 || RSX_INT || {{pini}} || Connected to [[RSX]] pad AY7 ([[Template:RSX pad layout 41x41|RSX layout 41x41]]), or pad <abbr title="Unknown>UNK</abbr> ([[Template:RSX_pad_layout_34x34|RSX layout 34x34]]) || 1.5V Running
| 72 || 11 || {{cellcolors|#33f|#e77}} P111/ANO1 || RSX_INT || {{pini}} || Connected to [[RSX]] pad AY7 ([[Template:RSX pad layout 41x41|RSX layout 41x41]]), or pad <abbr title="Unknown>UNK</abbr> ([[Template:RSX_pad_layout_34x34|RSX layout 34x34]]) || 1.5V Running
|-
|-
| 73 || data-sort-value="19"| || {{cellcolors|#ff3333|#ffffff}} AV<span style="font-size:60%;">REF0</span> ||  || - ||  || 1.20V Running
| 73 || data-sort-value="19"| || {{cellcolors|#f33|#fff}} AV<span style="font-size:60%;">REF0</span> ||  || {{pin}} ||  || 1.20V Running
|-
|-
| 74 || data-sort-value="20"| || {{cellcolors|#333333|#ffffff}} AV<span style="font-size:60%;">SS</span> || GND || - ||  ||  
| 74 || data-sort-value="20"| || {{cellcolors|#333|#fff}} AV<span style="font-size:60%;">SS</span> || GND || {{pin}} ||  ||  
|-
|-
| 75 || 15 || P157 || BE_POWGOOD  || ←I/O→ ||  || 1.20V Running
| 75 || 15 || P157 || BE_POWGOOD  || ←I/O→ ||  || 1.20V Running
Line 208: Line 208:
| 84 || 2 || P26/ANI6 ||  || ←I/O→ || EJECT_SW ??? Connected to Switch board eject switch ???. To a testpad ||  
| 84 || 2 || P26/ANI6 ||  || ←I/O→ || EJECT_SW ??? Connected to Switch board eject switch ???. To a testpad ||  
|-
|-
| 85 || 2 || {{cellcolors|#408040|#ffffff}} P25/ANI5 || WIFI_DATA_1 || ←I/O→ || 10K resistor to GND, to testpad, and to 100ohms resistor to Wifi/BT module. See: [[Media:KTE-001_wifitraces.jpg|wifi/BT 10x7 pinout]] or [[Media:REX-001_wifitraces.jpg|wifi/BT 9x7 pinout]] ||  
| 85 || 2 || {{cellcolors|#d9f|#fff}} P25/ANI5 || WIFI_DATA_1 || ←I/O→ || 10K resistor to GND, to testpad, and to 100ohms resistor to Wifi/BT module. See: [[Media:KTE-001_wifitraces.jpg|wifi/BT 10x7 pinout]] or [[Media:REX-001_wifitraces.jpg|wifi/BT 9x7 pinout]] ||  
|-
|-
| 86 || 2 || {{cellcolors|#408040|#ffffff}} P24/ANI4 || WIFI_DATA_2 || ←I/O→ || 10K resistor to GND, to testpad, and to 100ohms resistor to Wifi/BT module. See: [[Media:KTE-001_wifitraces.jpg|wifi/BT 10x7 pinout]] or [[Media:REX-001_wifitraces.jpg|wifi/BT 9x7 pinout]] ||  
| 86 || 2 || {{cellcolors|#d9f|#fff}} P24/ANI4 || WIFI_DATA_2 || ←I/O→ || 10K resistor to GND, to testpad, and to 100ohms resistor to Wifi/BT module. See: [[Media:KTE-001_wifitraces.jpg|wifi/BT 10x7 pinout]] or [[Media:REX-001_wifitraces.jpg|wifi/BT 9x7 pinout]] ||  
|-
|-
| 87 || 2 || P23/ANI3 ||  || ←I/O→ ||  || 3.3V Running
| 87 || 2 || P23/ANI3 ||  || ←I/O→ ||  || 3.3V Running
Line 234: Line 234:
| 97 || 0 || P00/TI00 ||  || ←I/O→ ||  ||  
| 97 || 0 || P00/TI00 ||  || ←I/O→ ||  ||  
|-
|-
| 98 || {{cellcolors|#246|#fff}} TO07 || FANPWM0 || {{pino}} || Connected to the [[Cooling|FAN]] grey wire (PWM duty) || 0
| 98 || 14 || {{cellcolors|#246|#fff}} TO07 || FANPWM0 || {{pino}} || Connected to the [[Cooling|FAN]] grey wire (PWM duty) || 0
|-
|-
| 99 || 14 || P144/SO20/TxD2 ||  || ←I/O→ ||  || 3.3V Running
| 99 || 14 || P144/SO20/TxD2 ||  || ←I/O→ ||  || 3.3V Running

Revision as of 10:19, 4 June 2022


Pinout

Syscon pinout LQFP 100 pins
NEC/Renesas 78K0R/KG3 Optional pin configurations

Syscon SW3-304
CECH-42xx with PQX-001 motherboard
[ View ], [ Discuss ] or [ Edit ]
Syscon pinout LQFP 100 pins
[ View ], [ Discuss ] or [ Edit ]
Pin Port Name Type Description STBY Voltages
NEC/Renesas Sony/Custom
1 14 SCL20 HDMI_I2C_SCL
Out
 Connected to HDMI controller MN8647091 pin 27 0
2 14 P141/PCLBUZ1/INTP7 SB_INT/SYSCSINT ? ←I/O→
3 14 P140/PCLBUZ0/INTP6 ←I/O→
4 12 P120/INTP0/EXLVI ←I/O→ External potential input for low-voltage detector ? 1.5V Running
5 4 P47/INTP2 ←I/O→ BT_WAKEON ??? Connected to Wifi/BT module ??? (BT_WAKEON ? or BT_RESET ?)
6 4 TO05 BUZZER
Out
 Connected to the Buzzer through a transistor
7 4 P45/SO01 ←I/O→ Connected to South Bridge CXD9963GB ? (SB_SPI_DO) 3.3V Running
8 4 P44/SI01 ←I/O→ Connected to South Bridge CXD9963GB ? (SB_SPI_DI) 3.3V Standby 3.3V Running
9 4 P43/SCK01 ←I/O→ Connected to South Bridge CXD9963GB ? (SB_SPI_CLK) 3.3V Standby 3.3V Running
10 4 P42/TI04/TO04 ←I/O→ Connected to South Bridge CXD9963GB ? (SB_SPI_CS) 3.3V Running
11 4 TOOL1 TOOL_CLK ? Connected to Service Connector 3rd Gen. pin 13 (Tool clock) through a missing resistor ? 3.3V Running
12 4 TOOL0 TOOL_DAT
In/Out
 Connected to Service Connector 3rd Gen. pin 7 (Tool Data) through a missing resistor ? 3.3V Running
13 RESET RESET
In
 3.3V Running
14 12 XT2 OSCOUT
Out
 Subsystem clock. Connected to a big black crystal. Amplitude (32.768Khz?) 1.2V Standby 1.2V Running
15 12 XT1 OSCIN
In
 Subsystem clock. Connected to a big black crystal. Amplitude (32.768Khz?) 0.80V Running
16 FLMD0 FLASH_MODE
In
 3.3V Standby 3.3V Running
17 12 X2 XTAL
Out
 Main system clock. Connected to a white ceramic crystal marked "ED" or "EU"
18 12 X1 EXTAL
In
 Main system clock. Connected to a white ceramic crystal marked "ED" or "EU"
19 REGC VREG_CAP
Others
 2.5V Running
20 VSS GND
Others
21 EVSS0 GND
Others
22 VDD 3.3_EVER_B
Others
 3.3V Standby 3.3V Running
23 EVDD0 3.3_EVER_B
Others
 3.3V Standby 3.3V Running
24 6 P60/SCL0 MK_I2C_SCL ? ←I/O→ Connected to Texas Instruments-SCEI Clock Generator CDC972 pin 37 ???
25 6 P61/SDA0 MK_I2C_SDA ? ←I/O→ Connected to Texas Instruments-SCEI Clock Generator CDC972 pin 38 ???
26 6 P62 ←I/O→ 2.5V Running
27 6 P63 ←I/O→ 10K resistor to GND ? 3.3V Standby
28 3 P31/TI03/TO03/INTP4 ACIN_DET ? ←I/O→
29 6 P64/RD ←I/O→ Connected (indirectly) to a voltage regulator ? (to enable something ?) 3.3V Running
30 6 P65/WR0 ←I/O→ Connected to the service connector ? 3.3V Running
31 6 P66/WR1 ←I/O→ 3.3V Running
32 6 P67/ASTB NOT_CONNECTED ? ←I/O→ 3.3V Running
33 7 P77/EX23/KR7/INTP11 ←I/O→ 3.3V Running
34 7 P76/EX22/KR6/INTP10 ←I/O→ 3.3V Running
35 7 P75/EX21/KR5/INTP9 ←I/O→ 3.3V Running
36 7 P74/EX20/KR4/INTP8 ←I/O→ 10K resistor to GND ? 3.3V Running
37 7 P73/EX19/KR3 ←I/O→ Connected to the service connector ? 3.3V Running
38 7 P72/EX18/KR2 ←I/O→ 3.3V Running
39 7 P71/EX17/KR1 ←I/O→ Connected to a voltage regulator ? (to enable something ?) 3.3V Running
40 7 P70/EX16/KR0 ←I/O→ 3.3V Running
41 0 P06/WAIT ←I/O→ 45K resistor to GND ?
42 0 P05/CLKOUT ←I/O→ 45K resistor to GND ? 3.3V Running
43 EVSS1 GND
Others
44 8 P80/EX0 ←I/O→
45 8 P81/EX1 ←I/O→ 1 ohm resistor to ground
46 8 P82/EX2 ←I/O→ 3.3V Running
47 8 P83/EX3 ←I/O→ 1 ohm resistor to ground
48 8 P84/EX4 ←I/O→ 3.3V Running
49 8 P85/EX5 ←I/O→ 3.3V Running
50 8 P86/EX6 ←I/O→ 3.3V Running
51 8 P87/EX7 ←I/O→ 3.3V Running
52 3 P30/INTP3/RTC1HZ ←I/O→ 3.3V Running
53 EVDD1 3.3_EVER_B
Others
 3.3V Standby 3.3V Running
54 5 P50/EX8 ←I/O→ 3.3V Running
55 5 P51/EX9 ←I/O→
56 5 P52/EX10 WIFI_CTRL ←I/O→ 10k resistor to GND, and to wifi/BT module. See: wifi/BT 10x7 pinout or wifi/BT 9x7 pinout Variable V Standby 3.3V Running
57 5 P53 UART0_RxD
In
 Syscon UART. Connected to service connector ?
58 5 P54 UART0_TxD
Out
 Syscon UART. Connected to service connector ? Variable V Standby 3.3V Running
59 5 P55/EX13 ←I/O→ 3.3V Running
60 5 P56/EX14 ←I/O→ 3.3V Running
61 5 P57/EX15 ←I/O→ 3.3V Running
62 1 P17/EX31/TI02/TO02 VD_VINT0/RSX_VINTE0
In
 Connected to RSX pad AR22 (RSX layout 41x41), or pad UNK (RSX layout 34x34) through a 10k resistor 1.5V Running
63 1 P16/EX30/TI01/TO01/INTP5
Not Connected
 NOT_CONNECTED ? 0.8V Running
64 1 P15/EX29/RTCDIV/RTCCL VD_VINT1/RSX_VINTE1
In
 Connected to RSX pad AL38 (RSX layout 41x41), or pad UNK (RSX layout 34x34) 1.5V Running
65 1 P14/EX28 RSX_RESET
Out
 Connected to RSX pad AW5 (RSX layout 41x41), or pad UNK (RSX layout 34x34) 1.5V Running
66 1 P13 RSX_SPI_CS
Out
 Connected to RSX pad AW8 (RSX layout 41x41), or pad UNK (RSX layout 34x34) 1.5V Running
67 1 SO00 RSX_SPI_DO
Out
 Connected to RSX pad AY8 (RSX layout 41x41), or pad UNK (RSX layout 34x34) 1.5V Running
68 1 SI00 RSX_SPI_DI
In
 Connected to RSX pad BA7 (RSX layout 41x41), or pad UNK (RSX layout 34x34)
69 1 SCK00 RSX_SPI_CLK
Out
 Connected to RSX pad BA6 (RSX layout 41x41), or pad UNK (RSX layout 34x34)
70 AVREF1
Others
 1.5V Running
71 11 P110/ANO0 ←I/O→ Connected to a testpad
72 11 P111/ANO1 RSX_INT
In
 Connected to RSX pad AY7 (RSX layout 41x41), or pad UNK (RSX layout 34x34) 1.5V Running
73 AVREF0
Others
 1.20V Running
74 AVSS GND
Others
75 15 P157 BE_POWGOOD ←I/O→ 1.20V Running
76 15 P156 BE_RESET_AND ←I/O→ Resistor to GND ? 1.20V Running
77 15 P155 BE_SPI_DO
Out
 Connected to CELL pad. (MOSI) Serial Output from Syscon Master to Cell Slave 0
78 15 P154 BE_SPI_DI
In
 Connected to CELL pad. (MISO) Serial Input from Cell Slave to Syscon Master 1.2
79 15 P153 BE_SPI_CLK
Out
 Connected to CELL pad. 2.5 Mhz SPI Clock
80 15 P152 BE_SPI_CS
Out
 Connected to CELL pad. Chip Select 2.0
81 15 P151 BE_INT/ATTENTION
In
 Connected to CELL pad BA17 through a NPN transistor (CELL switches the transistor to connect this pin to GND) 3V @ standby (3.15V)
82 15 P150 THERMAL_OVERLOAD ←I/O→ To a testpad Variable V Standby
83 2 P27/ANI7 ←I/O→ POW_SW ??? Connected to Switch board power switch ??? 3.3V Standby 3.3V Running
84 2 P26/ANI6 ←I/O→ EJECT_SW ??? Connected to Switch board eject switch ???. To a testpad
85 2 P25/ANI5 WIFI_DATA_1 ←I/O→ 10K resistor to GND, to testpad, and to 100ohms resistor to Wifi/BT module. See: wifi/BT 10x7 pinout or wifi/BT 9x7 pinout
86 2 P24/ANI4 WIFI_DATA_2 ←I/O→ 10K resistor to GND, to testpad, and to 100ohms resistor to Wifi/BT module. See: wifi/BT 10x7 pinout or wifi/BT 9x7 pinout
87 2 P23/ANI3 ←I/O→ 3.3V Running
88 2 P22/ANI2 ←I/O→ Connected to Bluray Drive through 100ohm resistor array ???. See: pins 115,116,117 (port 2)
89 2 P21/ANI1 ←I/O→ Connected to Bluray Drive through 100ohm resistor array ???. See: pins 115,116,117 (port 2) 3.3V Running
90 2 P20/ANI0 ←I/O→ Connected to Bluray Drive through 100ohm resistor array ???. See: pins 115,116,117 (port 2) 3.3V Standby 3.3V Running
91 13 P130 ACDC_STBY ? O→ Connected to standby voltage regulator 348A, pins 2 and 7 EN_HDMI ? 3.3V Running
92 13 P131/TI06/TO06 ←I/O→ Connected to a voltage regulator ? 3.3V Running
93 0 P04/SCK10/SCL10 ←I/O→ DVE_I2C_SCL ???. Connected to Digital Video Encoder CXM4027R pin 35 ??? 3.3V Running
94 0 P03/SI10/RxD1/SDA10 ←I/O→ DVE_I2C_SDA ???. Connected to Digital Video Encoder CXM4027R pin 36 ??? 3.3V Running
95 0 P02/SO10/TxD1 ←I/O→ 3.3V Running
96 0 P01/TO00 ←I/O→ Connected to HDMI controller MN8647091 pin 93 ??? 1.5V Running
97 0 P00/TI00 ←I/O→
98 14 TO07 FANPWM0
Out
 Connected to the FAN grey wire (PWM duty) 0
99 14 P144/SO20/TxD2 ←I/O→ 3.3V Running
100 14 SDA20 HDMI_I2C_SDA
In/Out
 Connected to HDMI controller MN8647091 pin 29 0
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Template:Syscon_pinout_LQFP_100_pins&oldid=66843"