Template:Toshiba T6UN6EFG Pinout: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
mNo edit summary
mNo edit summary
Line 27: Line 27:
| 12 || {{cellcolors|#000000|#ffffff}} GND || || To ground
| 12 || {{cellcolors|#000000|#ffffff}} GND || || To ground
|-
|-
| 13 || POWER_CTRL ? || || Texas Instruments SN89062, pin 4 in VX4 boards
| 13 || BT_POWER_CTRL ? || || Texas Instruments SN89062, pin 4 in VX4 boards
|-
|-
| 14 || {{cellcolors|#ffddcc}} BT_UART_SELECT ? || || To BT module (ALPS 413A pin 8 in VX4 boards) through <abbr title="33ohm in VX4 boards">resistor</abbr>
| 14 || {{cellcolors|#ffddcc}} BT_UART_SELECT ? || || To BT module (ALPS 413A pin 8 in VX4 boards) through <abbr title="33ohm in VX4 boards">resistor</abbr>
Line 37: Line 37:
| 17 || {{cellcolors|#ffddcc}} BT_UART_UNK ? || || To BT module (ALPS 413A pin 7 in VX4 boards)
| 17 || {{cellcolors|#ffddcc}} BT_UART_UNK ? || || To BT module (ALPS 413A pin 7 in VX4 boards)
|-
|-
| 18 || || || To BT module (ALPS 413A pin 14 in VX4 boards)
| 18 || BT_UNK_1 || || To BT module (ALPS 413A pin 14 in VX4 boards)
|-
|-
| 19 || || || To BT module (ALPS 413A pin 28 in VX4 boards)
| 19 || BT_UNK_2 || || To BT module (ALPS 413A pin 28 in VX4 boards)
|-
|-
| 20 || {{cellcolors|#000000|#ffffff}} GND || || To ground
| 20 || {{cellcolors|#000000|#ffffff}} GND || || To ground
Line 73: Line 73:
| 35 || {{cellcolors|#d699ff}} EEPROM_<abbr title="Master-In Slave-Out">SPI_MISO</abbr> || || EEPROM, pin 2 in VX4 boards
| 35 || {{cellcolors|#d699ff}} EEPROM_<abbr title="Master-In Slave-Out">SPI_MISO</abbr> || || EEPROM, pin 2 in VX4 boards
|-
|-
| 36 || POWER_UNK_1 || || Texas Instruments SN89062, pin 17 in VX4 boards
| 36 || STICKS_POWER_CTRL ? || || Texas Instruments SN89062, pin 17 in VX4 boards
|-
|-
| 37 || {{cellcolors|#b6a091}} LX_V ? || || <abbr title="46.6K located next to Toshiba T6UN6EFG pin 40 corner">resistor network</abbr>, and then <abbr title="located close to Toshiba T6UN6EFG pin 41 corner">capacitor network</abbr> to ground, and to Texas Instruments SN84001 pin 21 in VX4 boards
| 37 || {{cellcolors|#b6a091}} LX_V ? || || <abbr title="46.6K located next to Toshiba T6UN6EFG pin 40 corner">resistor network</abbr>, and then <abbr title="located close to Toshiba T6UN6EFG pin 41 corner">capacitor network</abbr> to ground, and to Texas Instruments SN84001 pin 21 in VX4 boards

Revision as of 13:44, 18 September 2017

Toshiba T6UN6EFG Pinout
[edit]
Pin # Name Port Description
1 GND To ground
2 V_STBY 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, Dualshock PS button, and LED's
3 GND To ground
4 V_BATT Capacitor network to ground, and resistor to battery and Texas Instruments SN89062 pin 16 in VX4 boards
5 V_STBY 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, Dualshock PS button, and LED's
6 ACCL_X To acccelerometer X axis through resistor
7 ACCL_Y To acccelerometer Y axis through resistor
8 ACCL_Z To acccelerometer Z axis through resistor
9 GYRO To gyroscope through resistor
10 V_STBY 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, Dualshock PS button, and LED's
11 SLAVES_RESET Texas Instruments SN84001 pin 2, and ALPS 413A pin 5 through resistor network in VX4 boards
12 GND To ground
13 BT_POWER_CTRL ? Texas Instruments SN89062, pin 4 in VX4 boards
14 BT_UART_SELECT ? To BT module (ALPS 413A pin 8 in VX4 boards) through resistor
15 BT_UART_RX ? To BT module (ALPS 413A pin 6 in VX4 boards) through resistor network
16 BT_UART_TX ? To BT module (ALPS 413A pin 9 in VX4 boards) through resistor network
17 BT_UART_UNK ? To BT module (ALPS 413A pin 7 in VX4 boards)
18 BT_UNK_1 To BT module (ALPS 413A pin 14 in VX4 boards)
19 BT_UNK_2 To BT module (ALPS 413A pin 28 in VX4 boards)
20 GND To ground
21 V_STBY 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, Dualshock PS button, and LED's
22 GND To ground
23 LED_1 To led 1 cathode through resistor network
24 LED_2 To led 2 cathode through resistor network
25 LED_3 To led 3 cathode through resistor network
26 LED_4 To led 4 cathode through resistor network
27 Not connected ? (for the PS button backlight led in prototypes ?)
28 SM Small Motor + (rumble)
29 BM Big Motor + (rumble)
30 EEPROM_SPI_CLOCK EEPROM, pin 6 in VX4 boards
31 EEPROM_SELECT EEPROM, pin 1 in VX4 boards
32 GND To ground
33 V_STBY 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, Dualshock PS button, and LED's
34 EEPROM_SPI_MOSI EEPROM, pin 5 in VX4 boards
35 EEPROM_SPI_MISO EEPROM, pin 2 in VX4 boards
36 STICKS_POWER_CTRL ? Texas Instruments SN89062, pin 17 in VX4 boards
37 LX_V ? resistor network, and then capacitor network to ground, and to Texas Instruments SN84001 pin 21 in VX4 boards
38 LY_V ? resistor network, and then capacitor network to ground, and to Texas Instruments SN84001 pin 20 in VX4 boards
39 RX_V ? resistor network, and then capacitor network to ground, and to Texas Instruments SN84001 pin 19 in VX4 boards
40 RY_V ? resistor network, and then capacitor network to ground, and to Texas Instruments SN84001 pin 18 in VX4 boards
41 BATT_CHARGE_SETPOINT Texas Instruments SN89062, pin 21 in VX4 boards
42 BATT_USB_POWER_GOOD ? Texas Instruments SN89062, pin 5 in VX4 boards
43 BATT_CHARGE_START ? Texas Instruments SN89062, pin 2 in VX4 boards
44 BATT_STATUS_1 ? Texas Instruments SN89062, pin 10 in VX4 boards (and TP8 in VX4 boards)
45 BATT_STATUS_2 ? Texas Instruments SN89062, pin 12 in VX4 boards (and TP9 in VX4 boards)
46 COM_3 COM 3 (Common Line for Digital Dualshock L3 button Dualshock select button Dualshock start button Dualshock R3 button))
47 DU D-Pad UP Button
48 DR D-Pad RIGHT Button
49 DD D-Pad DOWN Button
50 DL D-Pad LEFT Button
51 V_STBY 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, Dualshock PS button, and LED's
52 GND To ground
53 L2 Dualshock L2 button
54 L1 Dualshock L1 button
55 Not connected ? (connected to something in PP1 prototype)
56 R2 Dualshock R2 button
57 R1 Dualshock R1 button
58 TRIANGLE Dualshock triangle button
59 CIRCLE Dualshock circle button
60 CROSS Dualshock cross button
61 SQUARE Dualshock square button
62 Not connected ? (connected to something in PP1 prototype)
63 Not connected ? (connected to something in PP1 prototype)
64 SELECT Dualshock select button
65 L3 Dualshock L3 button
66 R3 Dualshock R3 button
67 START Dualshock start button
68 PS Dualshock PS button
69 To a testpoint (TP23 in VX4 boards), and 8.45K resistor to NTC 8K thermistor to standby rail (TP11 in VX4 boards)
70 GND To ground
71 GND
72 GND
73 V_STBY 2.8V Standby. Power for Toshiba T6UN6EFG, EEPROM, Dualshock PS button, and LED's
74 Capacitor network to ground, and NTC 8K thermistor to standby rail
75 COM_1 Capacitor network to ground, and to ribbon circuit board COM 1 pin (Common Line for Analog D-Pad LEFT Button D-Pad DOWN Button D-Pad RIGHT Button D-Pad UP Button Dualshock L1 button Dualshock L2 button)
76 COM_2 Capacitor network to ground, and to ribbon circuit board COM 2 pin (Common Line for Analog Dualshock square button Dualshock cross button Dualshock circle button Dualshock triangle button Dualshock R1 button Dualshock R2 button)
77 LX Left Stick, X axis Capacitor network to ground, and to Texas Instruments SN84001 pin 25 in VX4 boards
78 LY Left Stick, Y axis Capacitor network to ground, and to Texas Instruments SN84001 pin 24 in VX4 boards
79 RX Right Stick, X axis Capacitor network to ground, and to Texas Instruments SN84001 pin 23 in VX4 boards
80 RY Right Stick, Y axis Capacitor network to ground, and to Texas Instruments SN84001 pin 22 in VX4 boards
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Template:Toshiba_T6UN6EFG_Pinout&oldid=46341"