Syscon Hardware: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 162: | Line 162: | ||
[[File:SYSCON_GEN1.JPG|thumb|Syscon 1st Generation (BGA Packaging)]] | [[File:SYSCON_GEN1.JPG|thumb|Syscon 1st Generation (BGA Packaging)]] | ||
== | == Generation 2 == | ||
[[File:SYSCON_GEN2.JPG|thumb|Syscon 2nd Generation (QFP Packaging)]] | [[File:SYSCON_GEN2.JPG|thumb|Syscon 2nd Generation (QFP Packaging)]] | ||
QFP : 128 pins | |||
Revision as of 01:38, 8 April 2011
All these pinouts were Taken from a CECHG02
Topside Pinout
| Pin # | Name | Description |
|---|---|---|
| B3 | SW_10 | Unknown |
| A6 | MC_RESERVED2 | Unknown |
| E10 | MUL_CHKSTP_OUT | Unknown |
| C15 | VSS | Power Ground |
| B16 | OSCOUT | Goes to unpopulated crystal |
| C16 | OSCIN | From unpupulated crystal |
| B15 | POW_FAIL | Power Failure Signal |
| H1 | PN5 | Unknown |
| H2 | PN6 | Unknown |
| R1 | PM7 | Unknown |
| R2 | PM6 | Unknown |
| M4 | SW9 | Unknown |
| M10 | XDR_FET_SCK | Unknown |
Bottomside Pinout
| Pin # | Name | Description |
|---|---|---|
| R5 | VDD | +3.3v |
| R7 | DVDD | +1.8v |
| C15 | VSS | Power Ground |
| N16 | DIAG_MODE | Unknown |
| N15 | BACKUP_MODE | Unknown |
| P16 | UART0_TxD | Serial |
| P15 | UART0_RxD | Serial |
| R9 | PQ1 | Unknown |
| B12 | POW_SW | Power Switch |
| A12 | EJECT_SW | Eject Switch |
| L7 | JNTAST | JTAG |
| L8 | JRTCK | JTAG |
| L9 | JTMS | JTAG |
| K7 | JTDI | JTAG |
| K8 | JTCK | JTAG |
| K9 | JTDO | JTAG |
| M6 | SW_7_B | Unknown |
| M8 | FANPWM1 | Unknown |
| E5 | GX_VSRT | Unknown |
| B5 | DVE_RST | Unknown |
| G4 | HDMI_RST1 | Unknown |
| D4 | XDR_FET_RST | Unknown |
Generation 1
Generation 2
QFP : 128 pins