Iso module: Difference between revisions
Jump to navigation
Jump to search
m (→sc_iso.self: More error codes) |
m (→sc_iso.self: Fixed *B* errors) |
||
| Line 77: | Line 77: | ||
| 0x81010A07 || Bad parameters for set_region_data (0x8) | | 0x81010A07 || Bad parameters for set_region_data (0x8) | ||
|- | |- | ||
| 0x81010B01 || Read mngblk failed for | | 0x81010B01 || Read mngblk failed for Init For Updater (0xE) | ||
|- | |- | ||
| 0x81010B07 || Bad parameter for | | 0x81010B07 || Bad parameter for Init For Updater (0xE) | ||
|- | |- | ||
| 0x81011E07 || Bad parameter for encrypt (0x1) / decrypt (0x2) | | 0x81011E07 || Bad parameter for encrypt (0x1) / decrypt (0x2) | ||
|- | |- | ||
|} | |} | ||
Revision as of 15:43, 2 May 2012
Explaination
Isolated modules are used for de-/encryption, rehashing etc.
Commonly found in CoreOS, dev_flash, embedded sony selfs and service packages like Remarry Bluray Drive.
They are SPU .self binaries which can be called whenever needed: e.g. decrypting and hashcheck EID0 for Target ID inside IDPS when called upon by lv1 (HyperVisor) to set up restrictions for Retail/CEX or Debug/DEX etc.
Known isolated modules
| Module | Usage | Location | Remarks |
|---|---|---|---|
| AacsModule.spu.isoself | EID3 and theoretically OCRL | /dev_flash/bdplayer | |
| aim_spu_module.self | EID0 (section 0x00 and 0x0A) | CoreOS | |
| CprmModule.spu.isoself | EID3 | /dev_flash/bdplayer | |
| CssModule.spu.isoself | /dev_flash/bdplayer | ||
| fdm_spu_module | EID2, Remarry Bluray Drive | [2.43 JIG PUP] | |
| manu_info_spu_module.self | CoreOS (since FW 3.50) | ||
| mc_iso_spu_module.self | PS2 | CoreOS | |
| me_iso_for_ps2emu.self | PS2 | CoreOS (since FW 3.60) | |
| me_iso_spu_module.self | PS2 | CoreOS | |
| SacModule.spu.isoself | /dev_flash/vsh/module | ||
| sb_iso_spu_module.self | South Bridge | CoreOS | |
| sc_iso.self | syscon | CoreOS | |
| sc_iso_factory.self | syscon | [2.43 JIG PUP] | |
| spu_handler.isoself | PSP | self inside /dev_flash/pspemu/release/emulator_drm.sprx mself (since FW 3.15) | |
| spu_mode_auth.self | [2.43 JIG PUP] | ||
| spu_pkg_rvk_verifier.self | CoreOS | ||
| spu_token_processor.self | systemtokens, QA Flagging | CoreOS | |
| spu_utoken_processor.self | usertokens | CoreOS (since FW 2.40) | |
| ss_sc_init.self | [2.43 JIG PUP] | ||
| sv_iso_for_ps2emu.self | PS2 | CoreOS (since FW 3.60) | |
| sv_iso_spu_module.self | EID4, PS2, bluray | CoreOS |
sc_iso.self
sc_iso.self is used by the system to handle communications to/from syscon. Once debug printing is enabled after you load it, you can see some of the internal workings including error codes for when you are trying to use the module on your own.
| Error Value | Meaning |
|---|---|
| 0x81010101 | sc_iso command failed |
| 0x81010106 | Bad input command value |
| 0x81010607 | Bad parameter for Get SRH (0x4) |
| 0x81010801 | Init for VTRM (0x6) write mngblk failed |
| 0x81010807 | Bad parameters for Init for VTRM (0x6) |
| 0x81010907 | Bad parameters for get_region_data (0x7) |
| 0x81010A07 | Bad parameters for set_region_data (0x8) |
| 0x81010B01 | Read mngblk failed for Init For Updater (0xE) |
| 0x81010B07 | Bad parameter for Init For Updater (0xE) |
| 0x81011E07 | Bad parameter for encrypt (0x1) / decrypt (0x2) |