Editing Template:Syscon pinout LQFP 128 pins

<includeonly><br style="clear: both;" />
<span style="font-size:175%; font-family:Times New Roman;">Pinout</span>
----
</includeonly><div style="float:right">[[File:Syscon pinout LQFP 128 pins.png|300px|thumbnail|right|Syscon pinout LQFP 128 pins<br>NEC/Renesas 78K0R/KH3 Optional pin configurations]]<br>[[File:Syscon SW2-303 Unsoldered.JPG|300px|thumbnail|right|Syscon [[SW2-303]] unsoldered<br>[[CECH-25xx]] with [[JTP-001]] or [[JSD-001]] motherboard]]<br>[[File:Syscon_SW2-303.jpg|300px|thumbnail|right|Syscon [[SW2-303]]<br>[[CECH-25xx]] with [[JTP-001]] or [[JSD-001]] motherboard]]<br>[[File:SYSCON GEN2.JPG|300px|thumbnail|right|Syscon [[SW-301]]<br>[[CECHLxx]] with [[VER-001]] motherboard]]</div>

<div style="overflow:auto; <includeonly>height:1400px;</includeonly>">
{|class="wikitable sortable" style="width:100%; line-height:1em; font-size:0.9em"
|+{{captionlinks|Syscon pinout LQFP 128 pins}}
! Pin !! style="padding:1px" | Port !! colspan="2" | Name !! style="padding:1px" | Type !! Description !! Voltages
|-
! style="border-top:hidden; background-position:50%" | !! style="border-top:hidden; background-position:50%" | !! style="padding-right:0px" | <abbr title="NEC/Renesas optional pin configuration">NEC/Renesas</abbr> !! style="padding-right:0px" | Sony/Custom !! style="border-top:hidden; background-position:50%" | !! style="border-top:hidden; background-position:50%" | !! class="unsortable" style="border-top:hidden" | 
|-
| 1 || 14 || {{cellcolors|#77f|#ff0}} SCL20  || HDMI_I2C_SCL  || {{pino}} || Connected to [[HDMI]] controller [[MN8647091]] pin 27 || 0
|-
| 2 || 14 || {{cellcolors|#33f|#e77}} INTP7 || SB_INT/SYSCSINT || {{pini}} || Connected to [[South Bridge]] [[CXD9963GB]] pad W22 through a resistor || ~1V @ standby (0 V?)
|-
| 3 || 14 || {{cellcolors|#33f|#e77}} INTP6 || BE_INT/ATTENTION || {{pini}} || Connected to [[CELL BE|CELL]] pad BA17 (1342 pads layout), or pad <abbr title="Unknown">UNK</abbr> (1308 pads layout) through a <abbr title="CELL switches the transistor to connect this syscon pin to GND">NPN transistor</abbr> || 3V @ standby (3.15V)
|-
| 4 || 12 || {{cellcolors|#f93}} EXLVI ||  || {{pin}} || Connected to +12V_MAIN through a resistor and divider (EXLVI config = External potential input for low-voltage detector ?) || 0
|-
| 5 || 3 || {{cellcolors|#ff8}} P37 || POW_LED || {{pino}} || Connected to [[switch boards|Switch board]] dual led (Green) through a dual digital NPN transistor EMH1(SOT-563) || 0
|-
| 6 || 3 || {{cellcolors|#ff8}} P36 || STBY_LED || {{pino}} || Connected to [[switch boards|Switch board]] dual led (Red) through a dual digital NPN transistor EMH1(SOT-563) || 3v @ standby (3.3V)
|-
| 7 || 3 || P35 ||  || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad AA18 (SB_RESET ?, or SB_CGRST ?), see [[Template_talk:Syscon_pinout_LQFP_128_pins|talk page]] || 0
|-
| 8 || 3 || P34 ||  || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad AA17 (SB_RESET ?, or SB_CGRST ?), see [[Template_talk:Syscon_pinout_LQFP_128_pins|talk page]] || 0
|-
| 9 || 3 || {{cellcolors|#33f|#e77}} P33 ||  || {{pino}} || Connected to [[CELL BE|CELL]] pad AW18 ? (1342 pads layout), or pad <abbr title="Unknown">UNK</abbr> ? (1308 pads layout) (BE_RESET ?) || 0
|-
| 10 || 3 || P32 ||  || ? ||  || 0
|-
| 11 || 16 || {{cellcolors|#ff8}} TO13 || BACK_LEDS || {{pino}} || Connected to [[switch boards|Switch board]] backlit LEDs through a transistor || 0
|-
| 12 || 16 || {{cellcolors|#ff8}} TO12 || SW_PWM ? || {{pino}} || Connected to [[switch boards|Switch board]] contour LEDs through a transistor || 0
|- {{cellcolors|#eee}}
| 13 || 16 || <s>P161/TI11/TO11</s> ||  || {{pinnc}} || NOT_CONNECTED. <abbr title="The board circuit is designed to connect this pin to GND through a missing component>Floating</abbr> through a missing SMD component. See: [[Media:Syscon_SW2-303_Unsoldered.JPG|NOWHERE]] || 0
|- {{cellcolors|#eee}}
| 14 || 16 || <s>P160/TI10/TO10</s> ||  || {{pinnc}} || NOT_CONNECTED. <abbr title="The board circuit is designed to connect this pin to GND through a missing component>Floating</abbr> through a missing SMD component at the other side of the board. See: [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] || 0
|-
| 15 || 4 || P47/INTP2 ||  || {{pino}} || Connected to [[HDMI]] controller [[MN8647091]] pin 94 || 0
|-
| 16 || 4 || {{cellcolors|#246|#fff}} TO05 || BUZZER || {{pino}} || Connected to the Buzzer through a transistor || 0
|-
| 17 || 4 || {{cellcolors|#33f|#fff}} SO01 ||  || {{pino}} || Connected to [[South Bridge]] [[CXD9963GB]] pad <abbr title="Unknown">UNK</abbr> ? (SB_SPI_DO ?) / [[CELL BE|CELL]] pad AV13 (1308 pads layout, BE_SPI_DO) || 0
|-
| 18 || 4 || {{cellcolors|#33f|#fff}} SI01 ||  || {{pini}} || Connected to [[South Bridge]] [[CXD9963GB]] pad <abbr title="Unknown">UNK</abbr> ? (SB_SPI_DI ?) / [[CELL BE|CELL]] pad BA13 (1308 pads layout, BE_SPI_DI) || 3v @ standby
|-
| 19 || 4 || {{cellcolors|#33f|#fff}} <span style="text-decoration: overline;">SCK01</span> ||  || {{pino}} || Connected to [[South Bridge]] [[CXD9963GB]] pad <abbr title="Unknown">UNK</abbr> ? (SB_SPI_CLK ?) / [[CELL BE|CELL]] pad AY13 (1308 pads layout, BE_SPI_CLK) || 0
|-
| 20 || 4 || {{cellcolors|#33f|#fff}} P42 ||  || {{pino}} || Connected to [[South Bridge]] [[CXD9963GB]] pad <abbr title="Unknown">UNK</abbr> ? (SB_SPI_CS ?) / [[CELL BE|CELL]] pad AW13 (1308 pads layout, BE_SPI_CS)|| 0
|-
| 21 || 4 || {{cellcolors|#a74}} TOOL1 || TOOL_CLK || {{pino}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 13 (Tool clock) through a missing resistor || 3.0
|-
| 22 || 4 || {{cellcolors|#a74}} TOOL0 || TOOL_DAT || {{pinio}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 7 (Tool Data) through a missing resistor || 0
|-
| 23 || 12 || P127 ||  || ? ||  || 0
|-
| 24 || 12 || {{cellcolors|#77f|#ff0}} SDA21 || THR_I2C_SDA || {{pinio}} || Connected to [[Thermal#Temperature_Monitors|Temperature Monitors]] pin 7 (SMBus data) || 3v @ standby (3.15)
|-
| 25 || 12 || {{cellcolors|#77f|#ff0}} SCL21 || THR_I2C_SCL || {{pino}} || Connected to [[Thermal#Temperature_Monitors|Temperature Monitors]] pin 8 (SMBus clock) || 3v @ standby (3.15)
|-
| 26 || data-sort-value="17"| || {{cellcolors|#a74}} <span style="text-decoration: overline;">RESET</span> || RST || {{pini}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 9 through a missing resistor<br>Connected to standby voltage regulator [[Talk:Regulators|Mitsumi 463A]] pin 3 || 
|-
| 27 || 12 || {{cellcolors|#555|#fff}} XT2 || OSCOUT || {{pini}} || Connected to a crystal (Subsystem clock). CLK -> 1-2V Amplitude (32.768Khz) || 
|-
| 28 || 12 || {{cellcolors|#555|#fff}} XT1 || OSCIN || {{pini}} || Connected to a crystal (Subsystem clock). CLK -> 1-2V Amplitude (32.768Khz)  || 
|-
| 29 || data-sort-value="17"| || {{cellcolors|#a74}} FLMD0 || FLASH_MODE || {{pini}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 8 (Flash programming mode) through a missing resistor || 3.33
|-
| 30 || 12 || {{cellcolors|#555|#fff}} X2 || XTAL || {{pini}} || Connected to a crystal (Main system clock) marked "EX" (16.9344Mhz?) || 0.8v @ standby (1.1)
|-
| 31 || 12 || {{cellcolors|#555|#fff}} X1 || EXTAL || {{pini}} || Connected to a crystal (Main system clock) marked "EX" (16.9344Mhz?) || 2.2v @ standby (2.4)
|-
| 32 || data-sort-value="18"| || {{cellcolors|#f93}} REGC || VDDbat || {{pin}} || Connected to battery+ through 2 diodes<br>Connected to a capacitor (<abbr title="The user manual suggest 0.47 up to 1uF. Meassured onboard results in 1.28uF">internal voltage regulator, around 1uF</abbr>) at the other side of the board. See: [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] || 
|-
| 33 || data-sort-value="20"| || {{cellcolors|#333|#fff}} V<span style="font-size:60%;">SS0</span> || GND || {{pin}} ||  || 0
|-
| 34 || data-sort-value="20"| || {{cellcolors|#333|#fff}} EV<span style="font-size:60%;">SS0</span> || GND || {{pin}} ||  || 0
|-
| 35 || data-sort-value="19"| || {{cellcolors|#f33|#fff}} V<span style="font-size:60%;">DD</span> || 3.3_EVER_B || {{pin}} || Connected to standby voltage regulator [[Talk:Regulators|Mitsumi 463A]] pin 2 || 3v @ standby (3.3)
|-
| 36 || data-sort-value="19"| || {{cellcolors|#f33|#fff}} EV<span style="font-size:60%;">DD0</span> || 3.3_EVER_B || {{pin}} || Connected to standby voltage regulator [[Talk:Regulators|Mitsumi 463A]] pin 2 || 3v @ standby (3.3)
|-
| 37 || 6 || {{cellcolors|#77f|#ff0}} SCL0 || MK_I2C_SCL || {{pino}} || Connected to Texas Instruments-SCEI Clock Generator [[CDC972]] pin 37 || 0.2v @ standby
|-
| 38 || 6 || {{cellcolors|#77f|#ff0}} SDA0 || MK_I2C_SDA || {{pinio}} || Connected to Texas Instruments-SCEI Clock Generator [[CDC972]] pin 38 || 0.2v @ standby
|-
! style="padding:0px" data-sort-value="38.5"| || style="padding:0px" data-sort-value="0.5"| || style="padding:0px" colspan="5" |
|-
! style="padding:0px" data-sort-value="38.5"| || style="padding:0px" data-sort-value="1.5"| || style="padding:0px" colspan="5" |
|-
! style="padding:0px" data-sort-value="38.5"| || style="padding:0px" data-sort-value="2.5"| || style="padding:0px" colspan="5" |
|-
! style="padding:0px" data-sort-value="38.5"| || style="padding:0px" data-sort-value="3.5"| || style="padding:0px" colspan="5" |
|-
! style="padding:0px" data-sort-value="38.5"| || style="padding:0px" data-sort-value="4.5"| || style="padding:0px" colspan="5" |
|-
| 39 || 6 || P62 ||  || ? ||  || 0
|-
| 40 || 6 || {{cellcolors|#ccc}} P63 || P63_DOWN || {{pin}} || 10K resistor to GND || 0
|-
| 41 || 3 || {{cellcolors|#f93}} INTP4 || ACIN_DET || {{pini}} || Connected to [[Power Supply]] control connector pin 4 through a transistor. See: [[Media:SYSCON_SWx_JTP-001_JSD-001_HSW-001_CN101.jpg|schematic]] || 3v @ standby (3.3)
|-
| 42 || 6 || {{cellcolors|#3c3|#fff}} P64/<span style="text-decoration: overline;">RD</span> ||  || {{pino}} || Connected to voltage regulator [[Talk:Regulators | BD9684 0906]] pin 4 (enable something) through some undocumented components || 0
|-
| 43 || 6 || {{cellcolors|#a74}} <span style="text-decoration: overline;">WR0</span> ||  || ? || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 12 through a missing resistor  || 3.0
|-
| 44 || 6 || P66/<span style="text-decoration: overline;">WR1</span> ||  || ? ||  || 0
|- {{cellcolors|#eee}}
| 45 || 6 || <s>P67/ASTB</s> ||  || {{pinnc}} || NOT_CONNECTED.  || 0
|-
| 46 || 7 || {{cellcolors|#33f|#e77}} P77/EX23/KR7/INTP11 ||  || {{pino}} || Connected to [[CELL BE|CELL]] pad BA19 ? (1342 pads layout), or pad <abbr title="Unknown">UNK</abbr> (1308 pads layout) through a transistor (labeled 26 and located near the CELL temperature monitor)<br>(inverted direction than the signal from pin 109) BE_POWGOOD ? || 0
|-
| 47 || 7 || P76/EX22/KR6/INTP10 ||  || ? ||  || 3v @ standby (3.15)
|-
| 48 || 7 || {{cellcolors|#33f|#e77}} INTP9 || VD_VINT0/RSX_VINTE0 || {{pini}} || Connected to [[RSX]] pad AR22 ([[Template:RSX pad layout 41x41|41x41 layout]]) through a <abbr title="labeled ND and located near the RSX temperature monitor">transistor</abbr> || 3v @ standby (3.15)
|-
| 49 || 7 || {{cellcolors|#ccc}} P74<s>/EX20/KR4/INTP8</s> || P74_DOWN || {{pin}} || 10K resistor to GND || 0
|-
| 50 || 7 || {{cellcolors|#a74}} KR3 ||  || ? || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 3<br>Connected to voltage regulator [[Talk:Regulators | D35653 0S25]] (FLASH_ENABLE ?) || 0
|-
| 51 || 7 || P72/EX18/KR2 ||  || ? || Connected to xxxxxxxxxxxxxx through <abbr title="Labeled 98 KC, located at the opposite side of the clock generator texas-instrument CDC972">transistor</abbr> || 0
|-
| 52 || 7 || {{cellcolors|#3c3|#fff}} P71/EX17/KR1 ||  || {{pino}} || Connected to voltage regulator [[Talk:Regulators|Rohm BD3525]] pin 12 (enable something) || 0
|-
| 53 || 7 || P70/EX16/KR0 ||  || ? ||  || 0
|-
| 54 || 0 || {{cellcolors|#ccc}} P06<s>/<span style="text-decoration: overline;">WAIT</span></s> || P06_DOWN || {{pin}} || 45K resistor array to GND || 0
|-
| 55 || 0 || {{cellcolors|#ccc}} P05<s>/CLKOUT</s> || P05_DOWN || {{pin}} || 45K resistor array to GND || 0
|-
| 56 || data-sort-value="20"| || {{cellcolors|#333|#fff}} EV<span style="font-size:60%;">SS1</span> || GND || {{pin}} ||  || 0
|-
| 57 || data-sort-value="19"| || {{cellcolors|#f33|#fff}} EV<span style="font-size:60%;">DD1</span> || 3.3_EVER_B || {{pin}} || Connected to standby voltage regulator [[Talk:Regulators|Mitsumi 463A]] pin 2 || 3v @ standby (3.3)
|- 
| 58 || 8 || P80/EX0 ||  || ? || 47k resistor tied to vcc || 0
|-
| 59 || 8 || P81/EX1 ||  || ? || 47k resistor tied to vcc || 0
|-
| 60 || 8 || P82/EX2 ||  || ? || 47k resistor tied to vcc || 0
|-
| 61 || 8 || P83/EX3 ||  || ? || 47k resistor tied to vcc || 0
|-
| 62 || 8 || P84/EX4 ||  || ? || 47k resistor tied to vcc || 0
|-
| 63 || 8 || P85/EX5 ||  || ? || 47k resistor tied to vcc || 0
|-
| 64 || 8 || P86/EX6 ||  || ? || 47k resistor tied to vcc || 0
|-
! style="padding:0px" data-sort-value="64.5"| || style="padding:0px" data-sort-value="5.5"| || style="padding:0px" colspan="5" |
|-
! style="padding:0px" data-sort-value="64.5"| || style="padding:0px" data-sort-value="6.5"| || style="padding:0px" colspan="5" |
|-
! style="padding:0px" data-sort-value="64.5"| || style="padding:0px" data-sort-value="7.5"| || style="padding:0px" colspan="5" |
|-
! style="padding:0px" data-sort-value="64.5"| || style="padding:0px" data-sort-value="8.5"| || style="padding:0px" colspan="5" |
|-
! style="padding:0px" data-sort-value="64.5"| || style="padding:0px" data-sort-value="10.5"| || style="padding:0px" colspan="5" |
|-
| 65 || 8 || P87/EX7 ||  || ? || tied to a resistor of 10k || 0
|-
| 66 || 3 || P30/INTP3/RTC1HZ || ||  ?  || goes to isl 6325 pin 9 || 0 <!-- pinout candidate ? https://www.renesas.com/us/en/document/dst/isl6327-datasheet -->
|-
| 67 || 5 || P50/EX8 || ||  ?  || goes to isl 6325 pin 8   || 0
|-
| 68 || 5 || P51/EX9 || ||  ?  || goes to isl 6325 pin 7   || 0
|-
| 69 || 5 || P52/EX10 || ||  ?  || goes to isl 6325 pin 6  || 0
|-
| 70 || 5 || P53/EX11 || ||  ?  || goes to isl 6325 pin 5  || 0
|-
| 71 || 5 || P54/EX12 || ||  ?  || goes to isl 6325 pin 4  || 0
|-
| 72 || 5 || P55/EX13 || ||  ?  || goes to isl 6325 pin 3  || 0
|-
| 73 || 5 || P56/EX14 || ||  ?  || goes to isl 6325 pin 2  || 0
|-
| 74 || 5 || P57/EX15 || ||  ?  || goes to isl 6325 pin 20 || 0
|-
| 75 || 1 || {{cellcolors|#3c3|#fff}} <s>P17/EX31/TI02/</s>TO02 || RSX_VDDR_EN || {{pino}} || Connected to [[RSX]] through voltage regulator [[Talk:Regulators | Mitsumi 810X]] pin 5 || 0
|-
| 76 || 1 || {{cellcolors|#33f|#e77}} INTP5 || RSX_INT || {{pini}} || Connected to [[RSX]] pad AY7 ([[Template:RSX pad layout 41x41|41x41 layout]]) through a <abbr title="labeled ND and located near the RSX temperature monitor">transistor</abbr> || 3v @ standby (3.15)
|-
| 77 || 1 || P15/EX29/RTCDIV/RTCCL ||  || ? ||  || 3v @ standby (3.3)
|-
| 78 || 1 || {{cellcolors|#a74}} RxD3 || UART0_RxD || {{pini}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 11 (UART-TTL terminal Receive) through a missing resistor<br>Connected to [[PCI]] Connector pin 6 || 0
|-
| 79 || 1 || {{cellcolors|#a74}} TxD3 || UART0_TxD || {{pino}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 10 (UART-TTL terminal Transmit) through a missing resistor<br>Connected to [[PCI]] Connector pin 4 || 3.3
|-
| 80 || 1 || {{cellcolors|#33f|#fff}} SO00 || BE_SPI_DO / SB_SPI_DO || {{pino}} || Connected to [[CELL BE|CELL]] pad AV13 (1342 pads layout) / [[South Bridge]] pad V19 [[CXD9963GB]]. Serial Output from Syscon Master to Cell/SB Slave (MOSI)  || 0
|-
| 81 || 1 || {{cellcolors|#33f|#fff}} SI00 || BE_SPI_DI / SB_SPI_DI || {{pini}} || Connected to [[CELL BE|CELL]] pad BA13 (1342 pads layout) / [[South Bridge]] pad V22 [[CXD9963GB]]. Serial Input from Cell/SB Slave to Syscon Master (MISO) || 1.2
|-
| 82 || 1 || {{cellcolors|#33f|#fff}} <span style="text-decoration: overline;">SCK00</span> || BE_SPI_CLK / SB_SPI_CLK || {{pino}} || Connected to [[CELL BE|CELL]] pad AY13 (1342 pads layout) / [[South Bridge]] pad U18 [[CXD9963GB]]. 2.5 Mhz SPI Clock ||
|-
| 83 || 9 || {{cellcolors|#33f|#fff}} P90 || BE_SPI_CS / SB_SPI_CS|| {{pino}} || Connected to [[CELL BE|CELL]] pad AW13 (1342 pads layout) / [[South Bridge]] pad U19 [[CXD9963GB]]. Chip Select || 2.0
|-
| 84 || 9 || P91/EX33 ||  || ? ||  || 3v @ standby
|-
| 85 || 9 || P92/EX34 ||  || ? ||  || 0
|-
| 86 || 9 || P93/EX35 ||  || ? ||  || 0
|-
| 87 || 9 || {{cellcolors|#33f|#fff}} P94 ||  || {{pino}} || Connected to [[RSX]] pad AW8 ? ([[Template:RSX pad layout 41x41|41x41 layout]]) (RSX_SPI_CS ?) || 0
|-
| 88 || 9 || {{cellcolors|#33f|#fff}} <span style="text-decoration: overline;">SCK11</span> ||  || {{pino}} || Connected to [[RSX]] pad AY8 ? ([[Template:RSX pad layout 41x41|41x41 layout]]) (RSX_SPI_CLK ?) || 0
|-
| 89 || 9 || {{cellcolors|#33f|#fff}} SI11 ||  || {{pini}} || Connected to [[RSX]] pad BA7 ? ([[Template:RSX pad layout 41x41|41x41 layout]]) (RSX_SPI_DI ?) || 0
|-
| 90 || 9 || {{cellcolors|#33f|#fff}} SO11 ||  || {{pino}} || Connected to [[RSX]] pad BA6 ? ([[Template:RSX pad layout 41x41|41x41 layout]]) (RSX_SPI_DO ?) || 0
|-
| 91 || 11 || P112 ||  || ? ||  || 0
|-
| 92 || 11 || {{cellcolors|#3c3|#fff}} P113 ||  || {{pino}} || Connected to voltage regulator [[Talk:Regulators | BD3527]] pin 12 (located near FLASH) || 0
|-
| 93 || 11 || P114 ||  || ? || goes to BD352 ic pin 12 || 0
|-
| 94 || 11 || P115 ||  || ? || Connected to xxxxxxxxxxxxxx through <abbr title="Labeled 33N AE6, located at the opposite side of the clock generator texas-instrument CDC972">transistor</abbr> / BD949 pin 5 || 0
|-
| 95 || 11 || {{cellcolors|#3c3|#fff}} P116 ||  || {{pino}} || Connected to voltage regulator [[Talk:Regulators | BD3527]] pin 12 (located near USB) || 0
|-
| 96 || 11 || {{cellcolors|#393|#fff}} P117 || AV_EN || {{pino}} ||  Connected to [[MultiAV]] [[Connectors#AV_Multi_Out_pinout_-_CN2401_12P|connector]] pin 3 (+5V output) through a <abbr title="Labeled 5A KC">transistor</abbr> || 0
|-
| 97 || data-sort-value="19"| || {{cellcolors|#f33|#fff}} AV<span style="font-size:60%;">REF1</span> || 3.3_EVER_B || {{pin}} || Connected to standby voltage regulator [[Talk:Regulators|Mitsumi 463A]] pin 2 || 3v @ standby (3.3)
|- {{cellcolors|#eee}}
| 98 || 11 || <s>P110/ANO0</s> ||  || {{pinnc}} || NOT_CONNECTED.  || 0
|- {{cellcolors|#eee}}
| 99 || 11 || <s>P111/ANO1</s> ||  || {{pinnc}} || NOT_CONNECTED.  || 0
|-
| 100 || data-sort-value="19"| || {{cellcolors|#f33|#fff}} AV<span style="font-size:60%;">REF0</span> || 3.3_EVER_B || {{pin}} || Connected to standby voltage regulator [[Talk:Regulators|Mitsumi 463A]] pin 2 || 3v @ standby (3.3)
|-
| 101 || data-sort-value="20"| || {{cellcolors|#333|#fff}} AV<span style="font-size:60%;">SS0</span> || GND || {{pin}} ||  || 0
|-
| 102 || 15 || {{cellcolors|#ccc}} P157<s>/ANI15</s> || P157_DOWN || {{pin}} || 100k resistor to GND. And to a missing SMD component to [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to pin 8 of voltage regulator [[Talk:Regulators|Mitsumi 463A]] (3.3_EVER_A) <!-- Interesting, the circuit is designed to pull this pin up or down, is down by default but im wondering what does the pullup o0--> || 0
|-
! style="padding:0px" data-sort-value="102.5"| || style="padding:0px" data-sort-value="11.5"| || style="padding:0px" colspan="5" |
|-
! style="padding:0px" data-sort-value="102.5"| || style="padding:0px" data-sort-value="12.5"| || style="padding:0px" colspan="5" |
|-
! style="padding:0px" data-sort-value="102.5"| || style="padding:0px" data-sort-value="13.5"| || style="padding:0px" colspan="5" |
|-
! style="padding:0px" data-sort-value="102.5"| || style="padding:0px" data-sort-value="14.5"| || style="padding:0px" colspan="5" |
|-
! style="padding:0px" data-sort-value="102.5"| || style="padding:0px" data-sort-value="15.5"| || style="padding:0px" colspan="5" |
|-
! style="padding:0px" data-sort-value="102.5"| || style="padding:0px" data-sort-value="16.5"| || style="padding:0px" colspan="5" |
|-
| 103 || 15 || {{cellcolors|#ccc}} <s>P156/</s>ANI14 || ANI14_UP || {{pin}} || [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to 100k resistor to pin 8 of voltage regulator [[Talk:Regulators|Mitsumi 463A]] (3.3_EVER_A) || 0
|-
| 104 || 15 || {{cellcolors|#ccc}} <s>P155/</s>ANI13 || ANI13_DOWN || {{pin}} || [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to 100k resistor to GND || 0
|- {{cellcolors|#eee}}
| 105 || 15 || <s>P154/ANI12</s> ||  || {{pinnc}} || 100k resistor to GND  || 0
|- {{cellcolors|#eee}}
| 106 || 15 || <s>P153/ANI11</s> ||  || {{pinnc}} || 100k resistor to GND  || 0
|- {{cellcolors|#eee}}
| 107 || 15 || <s>P152/ANI10</s> ||  || {{pinnc}} || on cell front transistor  || 0
|- {{cellcolors|#eee}}
| 108 || 15 || <s>P151/ANI9</s> ||  || {{pinnc}} || pass on 100 ohms resistance then to power front panel  || 0
|-
| 109 || 15 || {{cellcolors|#33f|#e77}} <s>P150/</s>ANI8 || THERMAL_OVERLOAD ? || {{pini}} || Connected to [[CELL BE|CELL]] pad AV23 ? (1342 pads layout), or pad <abbr title="Unknown">UNK</abbr> (1308 pads layout) through a transistor (labeled ND and located near the CELL temperature monitor)<br>(inverted direction than the signal from pin 46) SYS_THR_ALRT ?<br>And to 10k resistor to [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to pin 8 of voltage regulator [[Talk:Regulators|Mitsumi 463A]] (3.3_EVER_A) || 3v @ standby
|-
| 110 || 2 || {{cellcolors|#ff8}} <s>P27/</s>ANI7 || POW_SW || {{pini}} || Connected to [[switch boards|Switch board]] power switch || 3v @ standby (3.3) 3.3
|-
| 111 || 2 || {{cellcolors|#ff8}} <s>P26/</s>ANI6 || EJECT_SW || {{pini}} || Connected to [[switch boards|Switch board]] eject switch || 3v @ standby (3.3) 3.3
|-
| 112 || 2 || {{cellcolors|#d9f|#fff}} P25/ANI5 ||  || ? || Connected to [[Wifi|Wifi/BT]] module (BT_WAKEON/BT_WAKE ? (input), BT_RESET ? (output), or WLAN_RESET/11G_RESET ? (output)) || 0
|-
| 113 || 2 || {{cellcolors|#d9f|#fff}} P24/ANI4 ||  || ? || Connected to [[Wifi|Wifi/BT]] module (BT_WAKEON/BT_WAKE ? (input), BT_RESET ? (output), or WLAN_RESET/11G_RESET ? (output)) || 0
|-
| 114 || 2 || P23/ANI3 ||  || ? || to resistance 55 ohms to bdrom pin 11 || 0
|-
| 115 || 2 || {{cellcolors|#ff8}} <s>P22/</s>ANI2 ||  || {{pini}} || Connected to [[Bluray Drive]] [[Media:BD-460_boards_connectors.jpg|8-pins connector]] pin 8 through 100ohm resistor (DISC_CHUCK or DISC_OUT8_SW or DISC_OUT12_SW or <strike>DISC_IN or DISC_PHOT_LED</strike>), and to a testpad, see [[Template_talk:Syscon_pinout_LQFP_128_pins|talk page]] || 0
|-
| 116 || 2 || {{cellcolors|#ff8}} <s>P21/</s>ANI1 ||  || {{pini}} || Connected to [[Bluray Drive]] [[Media:BD-460_boards_connectors.jpg|8-pins connector]] pin 7 through 100ohm resistor (DISC_CHUCK or DISC_OUT8_SW or DISC_OUT12_SW or <strike>DISC_IN or DISC_PHOT_LED</strike>), and to a testpad, see [[Template_talk:Syscon_pinout_LQFP_128_pins|talk page]] || 0
|-
| 117 || 2 || {{cellcolors|#ff8}} <s>P20/</s>ANI0 ||  || {{pini}} || Connected to [[Bluray Drive]] [[Media:BD-460_boards_connectors.jpg|8-pins connector]] pin 6 through 100ohm resistor (DISC_CHUCK or DISC_OUT8_SW or DISC_OUT12_SW or <strike>DISC_IN or DISC_PHOT_LED</strike>), and to a testpad, see [[Template_talk:Syscon_pinout_LQFP_128_pins|talk page]] || (0V?)
|-
| 118 || 13 || {{cellcolors|#f93}} P130 || ACDC_STBY || {{pino}} || Connected to [[Power Supply]] control connector pin 3 through a 2K2ohm resistor. See: [[Media:SYSCON_SWx_JTP-001_JSD-001_HSW-001_CN101.jpg|schematic]] || 3v @ standby (3.3)
|-
| 119 || 13 || {{cellcolors|#393|#fff}} P131<s>/TI06/TO06</s> || HDMI_EN || {{pino}} || Connected to voltage regulator [[Talk:Regulators|Mitsumi 348A]] pins 2 and 7<br>Connected to [[Connectors#HDMI_Out| HDMI connector]] pin 18 (+5V_ANA ?) through a <abbr title="Labeled AROKE, located next to the HDMI connector, it have a thick copper trace for a voltage of the HDMI connector)>transistor</abbr> || 3v @ standby (3.3)
|-
| 120 || 0 || P07 ||  || ? || Connected to [[HDMI]] controller [[MN8647091]] pin 95 through 3.6K resitor || 0
|-
| 121 || 0 || {{cellcolors|#77f|#ff0}} SCL10 || DVE_I2C_SCL || {{pino}} || Connected to [[MultiAV|Digital Video Encoder]] [[CXM4027R]] pin 35 || 0
|-
| 122 || 0 || {{cellcolors|#77f|#ff0}} SDA10 || DVE_I2C_SDA || {{pinio}} || Connected to [[MultiAV|Digital Video Encoder]] [[CXM4027R]] pin 36 || 0
|-
| 123 || 0 || P02 ||  || ? || to pin 12 <abbr title="laser connector ?">bdrom port</abbr> (DISC_IN or DISC_PHOT_LED ?) || 0
|-
| 124 || 0 || P01/TO00 ||  || ? || Connected to [[HDMI]] controller [[MN8647091]] pin 93 || 0
|-
| 125 || 0 || P00/TI00 ||  || ? || to bottom transistor under optical port  || 0
|-
| 126 || 14 || {{cellcolors|#246|#fff}} TO07 || FANPWM0 || {{pino}} || Connected to the [[Cooling|FAN]] grey wire (PWM duty) || 0
|-
| 127 || 14 || P144 ||  || ? || to pin 17 <abbr title="laser connector ?">bdrom port</abbr> (DISC_IN or DISC_PHOT_LED ?) || 0
|-
| 128 || 14 || {{cellcolors|#77f|#ff0}} SDA20 || HDMI_I2C_SDA  || {{pinio}} || Connected to [[HDMI]] controller [[MN8647091]] pin 29 || 0
|}</div><noinclude>[[Category:Templates]]</noinclude>