Editing Switch boards
Jump to navigation
Jump to search
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.
| Latest revision | Your text | ||
| Line 4: | Line 4: | ||
*'''Switch board components''' | *'''Switch board components''' | ||
**'''Switches''': Power and Eject buttons | **'''Switches''': Power and Eject buttons | ||
**'''Green and Red leds''', all switch board models have them, are needed to show the standby/poweron modes | **'''Green and Red leds''', all switch board models have them, are needed to show the standby/poweron modes neither the infamous YLOD | ||
**'''Eject led''', this is the only led not controlled by syscon, the line goes to the bluray | **'''Eject led''', this is the only led not controlled by syscon, the line goes to the bluray drive, so is the bluray drive who decides when is lighted on | ||
**'''White backlight leds''', this was added for PS3 slim models with the new | **'''White backlight leds''', this was added for PS3 slim models with the new design of the buttons (not touch sensitive) | ||
**'''Unknown subcircuit leds''', this seems some kind of experiment that escaped the prototyping table and entered retail production, for some reason exists in some retail PS3 but seems deactivated and partially unpopulated | **'''Unknown subcircuit leds''', this seems some kind of experiment that escaped the prototyping table and entered retail production, for some reason exists in some retail PS3 but seems deactivated and partially unpopulated | ||
| Line 19: | Line 18: | ||
= Comparison of functionality = | = Comparison of functionality = | ||
{| class="wikitable | {| class="wikitable" | ||
|+PS3 retail switch boards | |+PS3 retail switch boards | ||
! colspan="2" | PS3 !! colspan="3" | Switch board !! colspan="2" | Switches || colspan="4" | Leds | ! colspan="2" | PS3 !! colspan="3" | Switch board !! colspan="2" | Switches || colspan="4" | Leds | ||
|- | |- | ||
! [[SKU_Models|PS3 Model]] !! [[Motherboard_Revisions|Motherboard]] !! Model !! Part | ! [[SKU_Models|PS3 Model]] !! [[Motherboard_Revisions|Motherboard]] !! Model !! Part {{numero}} !! Connector !! Power !! Eject !! Standby/PowerOn/<abbr title="Yellow color is made by lighting red + green leds together">YLOD</abbr> !! Eject !! Switches Backlight !! Board Contour Backlight (factory disabled) | ||
|- | |||
| colspan="11" {{cellcolors|lightblue}} | |||
|- | |- | ||
| [[CECHAxx]]<BR/>[[CECHBxx]] | | [[CECHAxx]]<BR/>[[CECHBxx]] | ||
| [[COK-001]] | | [[COK-001]] | ||
| rowspan="2" | [[CSW-001]] || rowspan="2" | 1-871-871-21 || rowspan="2" | 10 pins || rowspan="2" | Touch sensitive || rowspan="2" | Touch sensitive | | rowspan="2" | [[CSW-001]] || rowspan="2" | 1-871-871-21 || rowspan="2" | 10 pins || rowspan="2" | Touch sensitive || rowspan="2" | Touch sensitive | ||
| rowspan="2" | 1x <span style="color:#ffffff; background:#ff0000 | | rowspan="2" | 1x <span style="color:#ffffff; background:#ff0000;">red</span> (2 pins)<BR/>1x <span style="color:#ffffff; background:#00ff00;">green</span> (2 pins) || rowspan="2" | 1x <span style="color:#ffffff; background:#0000ff;">blue</span> || rowspan="2" {{no}} || rowspan="2" {{no}} | ||
|- | |- | ||
| [[CECHCxx]]<BR/>[[CECHExx]] | | [[CECHCxx]]<BR/>[[CECHExx]] | ||
| Line 35: | Line 36: | ||
| [[CECHGxx]] | | [[CECHGxx]] | ||
| [[SEM-001]] | | [[SEM-001]] | ||
| colspan="3" rowspan="4" | | colspan="3" rowspan="4" {{cellcolors|lightgrey}} Integrated on motherboard || rowspan="4" | Touch sensitive || rowspan="4" | Touch sensitive | ||
| rowspan="4" | 1x <span style="color:#ffffff; background:#ff0000 | | rowspan="4" | 1x <span style="color:#ffffff; background:#ff0000;">red</span> (2 pins) ?<BR/>1x <span style="color:#ffffff; background:#00ff00;">green</span> (2 pins) ? || rowspan="4" | 1x <span style="color:#ffffff; background:#0000ff;">blue</span> || rowspan="4" {{no}} || rowspan="4" {{no}} | ||
|- | |- | ||
| [[CECHHxx]] | | [[CECHHxx]] | ||
| Line 47: | Line 48: | ||
| [[VER-001]] | | [[VER-001]] | ||
|- | |- | ||
| | | colspan="11" {{cellcolors|lightblue}} | ||
|- | |- | ||
| [[CECH-20xx]] | | [[CECH-20xx]] | ||
| [[DYN-001]] | | [[DYN-001]] | ||
| [[DSW-001]] || 1-880-056-11 || 10 pins || Pressure || Pressure | | [[DSW-001]] || 1-880-056-11 || 10 pins || Pressure || Pressure | ||
| 1x | | 1x <span style="color:#ffffff; background:#ff0000;">red</span>/<span style="color:#ffffff; background:#00ff00;">green</span> (dual, 4 pins) || 1x <span style="color:#ffffff; background:#0000ff;">blue</span> || 2x <span style="color:#000000; background:#ffffff;">white</span> (power)<BR/>2x <span style="color:#000000; background:#ffffff;">white</span> (eject) || {{cellcolors|grey|lightgrey}} 1x <span style="color:#ffffff; background:#ff0000;">red</span> (left-top). 1x <span style="color:#ffffff; background:#0000ff;">blue</span> (right-top)<BR/>1x <span style="color:#ffffff; background:#0000ff;">blue</span> (left-bottom). 1x unpopulated (right-bottom) | ||
|- | |- | ||
| [[CECH-21xx]] | | [[CECH-21xx]] | ||
| [[SUR-001]] | | [[SUR-001]] | ||
| rowspan="2" | [[HSW-001]] || rowspan="2" | 1-881-946-11/21 || rowspan="2" | 10 pins || rowspan="2" | Pressure || rowspan="2" | Pressure | | rowspan="2" | [[HSW-001]] || rowspan="2" | 1-881-946-11<BR/>1-881-946-21 || rowspan="2" | 10 pins || rowspan="2" | Pressure || rowspan="2" | Pressure | ||
| rowspan="2" | 1x | | rowspan="2" | 1x <span style="color:#ffffff; background:#ff0000;">red</span>/<span style="color:#ffffff; background:#00ff00;">green</span> (dual, 4 pins) || rowspan="2" | 1x <span style="color:#ffffff; background:#0000ff;">blue</span> || rowspan="2" | 2x <span style="color:#000000; background:#ffffff;">white</span> (power)<BR/>2x <span style="color:#000000; background:#ffffff;">white</span> (eject) || rowspan="2" {{cellcolors|grey|lightgrey}} 1x <span style="color:#ffffff; background:#ff0000;">red</span> (left-top). 1x unpopulated (right-top)<BR/>1x <span style="color:#ffffff; background:#0000ff;">blue</span> (left-bottom). 1x unpopulated (right-bottom) | ||
|- | |- | ||
| [[CECH-25xx]] | | [[CECH-25xx]] | ||
| Line 65: | Line 66: | ||
| [[KTE-001]] | | [[KTE-001]] | ||
| [[KSW-001]] || 1-884-751-31 || 6 pins || Pressure || Pressure | | [[KSW-001]] || 1-884-751-31 || 6 pins || Pressure || Pressure | ||
| 1x | | 1x <span style="color:#ffffff; background:#ff0000;">red</span>/<span style="color:#ffffff; background:#00ff00;">green</span> (dual, 4 pins) || {{no}} || {{no}} || {{no}} | ||
|- | |- | ||
| | | colspan="11" {{cellcolors|lightblue}} | ||
|- | |- | ||
| [[PPX-001]]<BR/>[[PQX-001]] | | rowspan="1" | SuperSlim | ||
| [[ | | [[MSX-001]]<BR/>[[MPX-001]]<BR/>[[NPX-001]] ?<BR/>[[PPX-001]] ?<BR/>[[PQX-001]] ?<BR/>[[RTX-001]] ? | ||
| 1x | | [[MSW-001]] || 1-886-929-11 || 6 pins || Pressure || {{no}} | ||
| 1x <span style="color:#ffffff; background:#ff0000;">red</span>/<span style="color:#ffffff; background:#00ff00;">green</span> (dual, 4 pins) || {{no}} || {{no}} || {{no}} | |||
|- | |- | ||
|} | |} | ||
*Notes | *Notes | ||
** | **Boardmodel naming seems thus first letter of SKU motherboard (C=COK, D=DYN, K=KTE, M=MSX/MPX) + "SW-001" ''(with the exception of HSW-001<!--HSW-001 should be related with SUR-001... or there is an easter egg in between DYN-001 and SUR-001-->)'' | ||
= | = Retail Switch boards Models = | ||
== CSW-001 == | == CSW-001 == | ||
{{CSW-001 pinout}} | {{CSW-001 pinout}} | ||
== DSW-001 == | == DSW-001 == | ||
{{DSW-001 pinout}} | {{DSW-001 pinout}} | ||
== HSW-001 == | == HSW-001 == | ||
{{HSW-001 pinout}} | {{HSW-001 pinout}} | ||
== KSW-001 == | == KSW-001 == | ||
{{KSW-001 pinout}} | {{KSW-001 pinout}} | ||
== MSW-001 == | == MSW-001 == | ||
{{MSW-001 pinout}} | {{MSW-001 pinout}} | ||
== | |||
= Flex Ribbon cables = | |||
<gallery> | |||
File:Power Eject Flex Ribbon Cable (PS3 1000 series, top view).jpg|Switch board Flex Ribbon Cable (PS3 1000 series, top view) | |||
File:Power Eject Flex Ribbon Cable (PS3 1000 series, bottom view).jpg|Switch board Flex Ribbon Cable (PS3 1000 series, bottom view) | |||
File:Power Eject Flex Ribbon Cable (PS3 2000 series, top view).jpg|Switch board Flex Ribbon Cable (PS3 2000 series, top view) | |||
File:Power Eject Flex Ribbon Cable (PS3 3000 series, top view).jpg|Switch board Flex Ribbon Cable (PS3 3000 series, top view) | |||
File:Power Eject Flex Ribbon Cable (PS3 3000 series, bottom view).jpg|Switch board Flex Ribbon Cable (PS3 3000 series, bottom view) | |||
</gallery> | |||
= Modding = | = Modding = | ||
== Contour backlight in PS3 2000 Series boards == | == Contour backlight in PS3 2000 Series boards == | ||
PS3 2000 series ([[CECH-20xx]], [[CECH-21xx]], and [[CECH-25xx]], with Switch boards DSW-001 and HSW-001) has been designed to have a lighted line all around the top edge of the Switch board | |||
'''Light rays bouncing surfaces, and light reactive materials''' | |||
<div style="float:right">[[File:Power Eject board PS3 2000 series (light rays schematic in contour leds).jpg|500px|thumb|left|Switch board PS3 2000 series<BR />Light rays schematic in contour leds]]</div> | <div style="float:right">[[File:Power Eject board PS3 2000 series (light rays schematic in contour leds).jpg|500px|thumb|left|Switch board PS3 2000 series<BR />Light rays schematic in contour leds]]</div> | ||
The plastic plate uses a "light reactive" material along the edge and in a squared hole in the corner allows the light to "transpass" it | The plastic plate uses a "light reactive" material along the edge and in a squared hole in the corner allows the light to "transpass" it | ||
| Line 148: | Line 120: | ||
The reflection of this surfaces can be increased a bit with chrome stickers (or alluminium tape). The case has a plane border of 3,5mm x 17,7cm perfect to stick in it, this way the glue layer of the sticker is at the other side, but the case doesnt have the 45 degrees surface (it has a weird hole instead), you can use other colors for the sticker/s because the color is partially visible from outside (preferably lighter colors or one that matches your led/s color to enhance it) | The reflection of this surfaces can be increased a bit with chrome stickers (or alluminium tape). The case has a plane border of 3,5mm x 17,7cm perfect to stick in it, this way the glue layer of the sticker is at the other side, but the case doesnt have the 45 degrees surface (it has a weird hole instead), you can use other colors for the sticker/s because the color is partially visible from outside (preferably lighter colors or one that matches your led/s color to enhance it) | ||
<BR /> | |||
<BR /> | |||
<BR /> | |||
<BR /> | |||
<BR /> | |||
<BR /> | |||
<BR /> | |||
<BR /> | |||
=== HSW-001 === | |||
See [[HSW-001]] | |||
=== DSW-001 Contour backlight === | |||
*Enabling contour LEDs in DSW-001 Switch board: [http://ps3gunz.org/forum/viewtopic.php?pid=590435 | Original thread (french)] [http://translate.google.com/translate?sl=fr&tl=en&js=n&prev=_t&hl=es&ie=UTF-8&u=http%3A%2F%2Fps3gunz.org%2Fforum%2Fviewtopic.php%3Fpid%3D590435&act=url | Google translated (english)] | |||
== Other links related == | |||
*HSW-001 pinout schematic: http://www.ps3hax.net/showthread.php?p=544479#post544479 | |||
*Contour leds tests video: http://www.youtube.com/watch?v=leapBkrm5tk | |||
{{Components}}<noinclude>[[Category:Main]]</noinclude> | {{Components}}<noinclude>[[Category:Main]]</noinclude> | ||