Editing SC EEPROM
Jump to navigation
Jump to search
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.
Latest revision | Your text | ||
Line 1: | Line 1: | ||
Most of the information we have about the | Most of the information we have about the sc eeprom comes from graf_chokolo reverse engineering of the HV see [[Hypervisor Reverse Engineering]] | ||
Here is where system flags, tokens and hashes are stored. | |||
Right now | Right now most of the communication we have with the sc eeprom is through Linux using graf_chokolo ps3dm-utils and/or using his payloads. | ||
See also {{talk}} page and [[User_talk:Zer0Tolerance|Zer0Tolerance]] | See also {{talk}} page and [[User_talk:Zer0Tolerance|Zer0Tolerance]] | ||
= | = SC EEPROM Info = | ||
SC EEPROM from fat consoles is a custom/proprietary EEPROM chip that uses a special non standard commands to read/write from EEPROM. | |||
We are so lucky that Sony had exposed EEROM chip legs out of Syscon, so we have a physical access to it and we could attach devices like "'''Logic Analyzer'''", "'''Protocol Analyzer'''", "'''Custom made MCU boards'''" to capture traffic between console and Syscon EEPROM. | |||
For FAT console Syscon EEPROM consists of: 0x4000 blocks, and every block is consists of 2 bytes of data. | |||
So the total EEPROM size is: 0x8000 byte length. | |||
And since the pin-out of Syscon chip for Slim & Super Slim consoles is not known till now, we can not be sure if the Syscon EEPROM pins are exposed outside or not so we can access it like in FAT console without handling Syscon it self. | |||
== | == SC EEPROM Commands == | ||
FAT console's SC EEPROM used a standard SPI protocol with a proprietary commands as flow: | |||
{| class="wikitable" | {| class="wikitable" | ||
Line 26: | Line 26: | ||
| Unlock Command || 0xA3 0x00 0x00 || This command must be send first before write command. | | Unlock Command || 0xA3 0x00 0x00 || This command must be send first before write command. | ||
|- | |- | ||
| Write Command || 0xA4 0xXX 0xXX || XX XX is a block to be written ( | | Write Command || 0xA4 0xXX 0xXX || XX XX is a block id to be written (value 0x0000 to 0x3FFF), the maximum data to be written in one command cycle is 32 byte length (16 blocks). | ||
|- | |- | ||
| Read Command || 0xA8 0xXX 0xXX || XX XX is a block to be read ( | | Read Command || 0xA8 0xXX 0xXX || XX XX is a block id to be read (value 0x0000 to 0x3FFF), there is no maximum limit for read command so we can send it once with block id 0x00 0x00 then read the full EEPROM at once without sending read command again. | ||
|- | |- | ||
| Check Status Command || 0xA9 0x00 0x00 0x00 || The response of this command is 0xFFFFFFFF if there is no error, or any other value if there is error happened or | | Check Status Command || 0xA9 0x00 0x00 0x00 || The response of this command is 0xFFFFFFFF if there is no error, or any other value if there is error happened or EEPROM still busy doing something. | ||
|} | |} | ||
= | = SC EEPROM dumps = | ||
* https://mega.co.nz/#!Bt8klAhQ!-t5YVetoL9gz6iZucpqQB9Vl9chCkbhFiMfqjbmotoc {{MD5|B0E0551116B718A4921757B2B074693F}} | * https://mega.co.nz/#!Bt8klAhQ!-t5YVetoL9gz6iZucpqQB9Vl9chCkbhFiMfqjbmotoc {{MD5|B0E0551116B718A4921757B2B074693F}} | ||
* https://mega.co.nz/#!B51wWJYA!zg8O-vCvRBOgK5mpzTQ1H2hgBZmykglmbksB5w1Mlfg {{MD5|3E0E73DACF7E10F2369624EA439C661B}} (partial: {{MD5|7E2BAD4DFDEE485494C8749B1C3E5676}} / {{MD5|05D9ED4B545C709C9C4564F047028DE8}}) | * https://mega.co.nz/#!B51wWJYA!zg8O-vCvRBOgK5mpzTQ1H2hgBZmykglmbksB5w1Mlfg {{MD5|3E0E73DACF7E10F2369624EA439C661B}} (partial: {{MD5|7E2BAD4DFDEE485494C8749B1C3E5676}} / {{MD5|05D9ED4B545C709C9C4564F047028DE8}}) | ||
Line 42: | Line 41: | ||
* https://mega.nz/#!iV0nGY4I!94ByAd-sourgK8_l_4s-6BX_V7iVOrysQd55bI0N6ws {{MD5|1DB1CAA8E3D54256A59D08B6AF2B9BC5}} (Dumped by Syscon EEPROM Flasher done by me "'''Abkarino'''" using Arduino Mega). | * https://mega.nz/#!iV0nGY4I!94ByAd-sourgK8_l_4s-6BX_V7iVOrysQd55bI0N6ws {{MD5|1DB1CAA8E3D54256A59D08B6AF2B9BC5}} (Dumped by Syscon EEPROM Flasher done by me "'''Abkarino'''" using Arduino Mega). | ||
different consoles, same initial 16 bytes. maybe key/iv? | |||
= Important | =Important Offsets= | ||
== | == EEPROM Offset Table - Flags and Tokens == | ||
Here is the table of | Here is the table of EEPROM offsets that can be accessed through Update Manager (3.15): | ||
{| class="wikitable FCK__ShowTableBorders" | {| class="wikitable FCK__ShowTableBorders" | ||
Line 56: | Line 53: | ||
! Offset !! Size !! Description | ! Offset !! Size !! Description | ||
|- | |- | ||
| 0x02F00 || 8 || | | 0x02F00 || 8 || Downgrade Minimum Version String | ||
|- | |- | ||
| 0x02F08 || | | 0x02F08 || 0x10 || Downgrade Minimum Version Build + Date Build String | ||
|- | |- | ||
| 0x02F20 || 8 || | | 0x02F20 || 8 || [[Target ID]]? (HV bible lists the Target ID as 85 Europe, not 83 Japan) | ||
|- | |- | ||
| 0x02F28 || 0xD0 || Padding/undocumented | | 0x02F28 || 0xD0 || Padding/undocumented | ||
<pre> | <pre>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ||
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF | ||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF | FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF | ||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF | FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF | ||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF | FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF | ||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF | FF FF FF FF FF FF FF FF FF FF FF FF FF FF xx xx | ||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF | xx xx xx FF FF xx xx xx xx xx xx xx xx xx xx xx | ||
xx xx 00 00 00 00 FF xx 00 xx xx FF FF FF FF FF | |||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF | |||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF | FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF | ||
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF | FF FF FF FF FF FF FF FF FF FF FF xx xx xx 00 00 | ||
FF FF FF FF FF FF FF FF FF FF FF | xx xx xx xx xx FF FF FF xx xx xx FF FF FF xx 00 </pre> | ||
</pre> | |||
|- | |- | ||
| 0x02FF8 || 1 || Factory Bit (0 = ?, 1 = reset, 2 = ?, 3 = (on retails)) | | 0x02FF8 || 1 || Factory Bit (0 = ?, 1 = reset, 2 = ?, 3 = (on retails)) | ||
|- | |- | ||
| 0x02FF9 || 0x7 || Padding/undocumented | | 0x02FF9 || 0x7 || Padding/undocumented | ||
<pre>00 00 00 | <pre>00 00 00 00 xx xx xx </pre> | ||
|- | |- | ||
|} | |} | ||
Line 91: | Line 86: | ||
|- | |- | ||
! colspan="2" | Offset !! Size !! Description | ! colspan="2" | Offset !! Size !! Description | ||
|- | |- | ||
| colspan="2" | 0x48000 || 0x13 || (lv0 NVS region 0 start) | | colspan="2" | 0x48000 || 0x13 || (lv0 NVS region 0 start) | ||
|- | |- | ||
| <abbr title="lv0 NVS region 0: 0x48000-0x48012"><small>0</small></abbr> || 0x48000 || 0x13 || (lv0 NVS region 0) | | <abbr title="lv0 NVS region 0: 0x48000-0x48012"><small>0</small></abbr> || 0x48000 || 0x13 || (lv0 NVS region 0) | ||
|- | |- | ||
| colspan="2" | 0x48012 || - || (lv0 NVS region 0 end) | | colspan="2" | 0x48012 || - || (lv0 NVS region 0 end) | ||
|- | |- | ||
Line 101: | Line 96: | ||
| colspan="2" | 0x48013 || 0x2A || QA Token ECDSA Signature (=> 3.60 firmwares) | | colspan="2" | 0x48013 || 0x2A || QA Token ECDSA Signature (=> 3.60 firmwares) | ||
|- | |- | ||
| colspan="2" | 0x48800 || | | colspan="2" | 0x48800 || 0x0C || (lv0 NVS region 1 start) | ||
|- | |- | ||
| rowspan=" | | rowspan="3" | <abbr title="lv0 NVS region 1: 0x48800-0x4880B"><small>1</small></abbr> || 0x48802 || 1 || | ||
|- | |- | ||
| | | 0x48804 || 4 || bootrom failure code | ||
|- | |- | ||
| | | 0x48808 || 4 || bootrom failure timestamp | ||
|- | |- | ||
| | | colspan="2" | 0x4880B || - || (lv0 NVS region 1 end) | ||
|- | |||
|- | |- | ||
| colspan="2" | 0x48C00 || 0x20 || (lv0 NVS region 2 start) | | colspan="2" | 0x48C00 || 0x20 || (lv0 NVS region 2 start) | ||
|- | |- | ||
| rowspan=" | | rowspan="19" | <abbr title="lv0 NVS region 2: 0x48C00-0x48C1F"><small>2</small></abbr> || 0x48C00 || 1 || load_image_in_rom flag (os_boot_order_flag) | ||
|- | |- | ||
| 0x48C01 || 1 || | | 0x48C01 || 1 || (force standalone mode related) | ||
|- | |- | ||
| 0x48C02 || 1 || | | 0x48C02 || 1 || debug interface (select_net_device) | ||
|- | |- | ||
| 0x48C03 || 1 || sys.dbgcard.dgbe.index (select_dgbe_device) | | 0x48C03 || 1 || sys.dbgcard.dgbe.index (select_dgbe_device) | ||
|- | |- | ||
| | | 0x48C05 || 1 || update_flag for CEB | ||
|- | |- | ||
| | | 0x48C06 || 1 || FSELF Control Flag / toggles release mode (fself_ctrl) | ||
|- | |- | ||
| | | 0x48C07 || 1 || Product Mode (UM allows to read this offset, it can be also written but only when already in product mode) | ||
|- | |- | ||
| | | 0x48C08 || 1 || (UNKNOWN {{unkn|debug}})) | ||
|- | |- | ||
| 0x48C0A || 1 || QA Flag | |||
| 0x48C0A || 1 || QA Flag | |||
|- | |- | ||
| 0x48C0B || 1 || mode_auth_flag / gx enable | | 0x48C0B || 1 || mode_auth_flag / gx enable | ||
|- | |- | ||
| 0x48C0C || 1 || | | 0x48C0C || 1 || bootrom diagnostic mode and parameter | ||
|- | |- | ||
| 0x48C0D || 1 || | | 0x48C0D || 1 || | ||
|- | |- | ||
| | | 0x48C0F || 2 || | ||
|- | |- | ||
| | | 0x48C11 || 1 || bootrom trace level (0x00: fatal errors, 0x01: errors, 0x02: information messages, 0x03: debug messages) | ||
|- | |- | ||
| | | 0x48C12 || 1 || | ||
|- | |- | ||
| | | 0x48C13 || 1 || Device Type (flash_ext_format) | ||
|- | |- | ||
| | | 0x48C14 || ? || cellos_spu_configure | ||
|- | |- | ||
| | | 0x48C18 || 4 || System Language [[XRegistry.sys#Settings]] ( /setting/system/language ) | ||
|- | |- | ||
| | | 0x48C1C || 4 || VSH Target (seems it can be 0xFFFFFFFE, 0xFFFFFFFF, 0x00000001 default: 0x00000000 /maybe QA,Debug,Retail,Kiosk?) | ||
|- | |- | ||
| colspan="2" | 0x48C1F || - || (lv0 NVS region 2 end) | | colspan="2" | 0x48C1F || - || (lv0 NVS region 2 end) | ||
|- | |- | ||
Line 196: | Line 161: | ||
| 0x48C23 || 1 || be ref clk (be_nclck_flag2) | | 0x48C23 || 1 || be ref clk (be_nclck_flag2) | ||
|- | |- | ||
| 0x48C24 || 1 || Bank #0 OS-Flag (ros0 if 0xFF else ros1 | | 0x48C24 || 1 || Bank #0 OS-Flag (ros0 if 0xFF else ros1) (os_bank_indicator) | ||
|- | |- | ||
| colspan="2" | 0x48C24 || - || (lv0 NVS region 3 end) | | colspan="2" | 0x48C24 || - || (lv0 NVS region 3 end) | ||
|- | |- | ||
Line 211: | Line 176: | ||
|- | |- | ||
| colspan="2" | 0x48C29 || 1 || Bank #1 rvkpkg-Flag | | colspan="2" | 0x48C29 || 1 || Bank #1 rvkpkg-Flag | ||
|- | |- | ||
| colspan="2" | 0x48C30 || 0x0D || (lv0 NVS region 4 start) | | colspan="2" | 0x48C30 || 0x0D || (lv0 NVS region 4 start) | ||
|- | |- | ||
| rowspan="3" | <abbr title="lv0 NVS region 4: 0x48C30-0x48C3C"><small>4</small></abbr> || 0x48C30 || 1 || | | rowspan="3" | <abbr title="lv0 NVS region 4: 0x48C30-0x48C3C"><small>4</small></abbr> || 0x48C30 || 1 || SPE number Usally 0x06, can be set to 0x07 to enable the 8 SPE (restrict_spu) | ||
|- | |- | ||
| 0x48C31 || 4 || | | 0x48C31 || 4 || sata_param | ||
|- | |||
| 0x48C35 || 8 || spr_tbuw_value (cellos_spu_configure) | |||
|- | |- | ||
| colspan="2" | 0x48C3C || - || (lv0 NVS region 4 end) | | colspan="2" | 0x48C3C || - || (lv0 NVS region 4 end) | ||
|- | |- | ||
| colspan="2" | 0x48C40 || 0x10 || (lv0 NVS region 5 start) | | colspan="2" | 0x48C40 || 0x10 || (lv0 NVS region 5 start) | ||
|- | |- | ||
| rowspan=" | | rowspan="6" | <abbr title="lv0 NVS region 5: 0x48C40-0x48C4F"><small>5</small></abbr> || 0x48C42 || 1 || HDD Copy Mode | ||
|- | |- | ||
| 0x48C43 || 4 || | | 0x48C43 || 4 || | ||
|- | |- | ||
| 0x48C47 || 1 || Analog Sunset Flag, will disable AACS video output without [[HDMI]] cable soon | | 0x48C47 || 1 || Analog Sunset Flag, will disable AACS video output without [[HDMI]] cable soon | ||
Line 240: | Line 205: | ||
| 0x48C61 || 1 || Recover Mode Flag | | 0x48C61 || 1 || Recover Mode Flag | ||
|- | |- | ||
| | | colspan="2" | 0x48C4F || - || (lv0 NVS region 5 end) | ||
|- | |- | ||
Line 265: | Line 214: | ||
|- | |- | ||
| 0x48C88 || 8 || (rsx.rdcy.1) | | 0x48C88 || 8 || (rsx.rdcy.1) | ||
|- | |- | ||
| colspan="2" | 0x48C8F || - || (lv0 NVS region 6 end) | | colspan="2" | 0x48C8F || - || (lv0 NVS region 6 end) | ||
|- | |- | ||
Line 280: | Line 229: | ||
| 0x48CA8 || 8 || (rsx.rdcy.5) | | 0x48CA8 || 8 || (rsx.rdcy.5) | ||
|- | |- | ||
| 0x48CB0 || 8 || (rsx.rdcy.6) | | 0x48CB0 || 8 || (rsx.rdcy.6) | ||
|- | |||
| 0x48CB8 || 8 || (rsx.rdcy.7) | |||
|- | |- | ||
| colspan="2" | 0x48CBF || - || (lv0 NVS region 7 end) | | colspan="2" | 0x48CBF || - || (lv0 NVS region 7 end) | ||
|- | |- | ||
Line 337: | Line 244: | ||
|- | |- | ||
| 0x48D08 || 4 || ip_gateway | | 0x48D08 || 4 || ip_gateway | ||
|- | |- | ||
| colspan="2" | 0x48D0B || - || (lv0 NVS region 8 end) | | colspan="2" | 0x48D0B || - || (lv0 NVS region 8 end) | ||
|- | |- | ||
Line 346: | Line 253: | ||
|- | |- | ||
| <abbr title="lv0 NVS region 9: 0x48D20-0x48D27"><small>9</small></abbr> || 0x48D20 || 8 || spider.gbe0.macaddr.0 (<code>0xFFFFFFFFFFFFFFFF</code> if unused/nonpresent) | | <abbr title="lv0 NVS region 9: 0x48D20-0x48D27"><small>9</small></abbr> || 0x48D20 || 8 || spider.gbe0.macaddr.0 (<code>0xFFFFFFFFFFFFFFFF</code> if unused/nonpresent) | ||
|- | |- | ||
| colspan="2" | 0x48D27 || - || (lv0 NVS region 9 end) | | colspan="2" | 0x48D27 || - || (lv0 NVS region 9 end) | ||
|- | |- | ||
Line 358: | Line 265: | ||
|- | |- | ||
| 0x48D38 || 8 || spider.gbe0.macaddr.3 (<code>FFFFFFFFFFFFFFFF</code> if unused/nonpresent) | | 0x48D38 || 8 || spider.gbe0.macaddr.3 (<code>FFFFFFFFFFFFFFFF</code> if unused/nonpresent) | ||
|- | |- | ||
| colspan="2" | 0x48D3F || - || (lv0 NVS region B end) | | colspan="2" | 0x48D3F || - || (lv0 NVS region B end) | ||
|- | |- | ||
Line 367: | Line 274: | ||
|- | |- | ||
| <abbr title="lv0 NVS region A: 0x48D3E-0x48D8D"><small>A</small></abbr> || 0x48D3E || 0x50 || QA Token - UM doesn't allow access to this offset but SC Manager can read/write it (qa_token) | | <abbr title="lv0 NVS region A: 0x48D3E-0x48D8D"><small>A</small></abbr> || 0x48D3E || 0x50 || QA Token - UM doesn't allow access to this offset but SC Manager can read/write it (qa_token) | ||
|- | |- | ||
| colspan="2" | 0x48D8D || - || (lv0 NVS region A end) | | colspan="2" | 0x48D8D || - || (lv0 NVS region A end) | ||
|- | |- | ||
| colspan="2" | 0x48D8E || 0x50 || mode_auth_data (read/cleared by ss_sc_init_pu, checked by spu_mode_auth | | colspan="2" | 0x48D8E || 0x50 || mode_auth_data (read/cleared by ss_sc_init_pu, checked by spu_mode_auth) | ||
|- | |- | ||
|} | |} | ||
Line 386: | Line 293: | ||
QA Token ECDSA Signature is stored in 0x48013 offset (starting from 3.60 firmwares) | QA Token ECDSA Signature is stored in 0x48013 offset (starting from 3.60 firmwares) | ||
== Undocumented | == Undocumented config == | ||
There is an unknown syscon response of 0x100 bytes when using NVS service with such params: BlockID=1, Offset=0, Size=0. | There is an unknown syscon response of 0x100 bytes when using NVS service with such params: BlockID=1, Offset=0, Size=0. | ||
<pre> | <pre> | ||
0000h: FF 02 FF FE FF 02 FF FF 19 FB E1 16 00 00 00 00 ÿ.ÿþÿ.ÿÿ.ûá..... | 0000h: FF 02 FF FE FF 02 FF FF 19 FB E1 16 00 00 00 00 ÿ.ÿþÿ.ÿÿ.ûá..... | ||
Line 439: | Line 315: | ||
</pre> | </pre> | ||
This is 0x48800 on EEPROM | |||
cech-c (NO BD Drive): http://pastie.org/private/grl0dc0dxajisa36chgm7w | |||
== lv0 SC EEPROM usage == | == lv0 SC EEPROM usage == | ||
<pre> | <pre> | ||
[*] lv0 NVS regions: | [*] lv0 NVS regions: | ||
Line 536: | Line 351: | ||
[*] lv0 SC EEPROM usage: | [*] lv0 SC EEPROM usage: | ||
name addr size structure | name addr size structure | ||
dgbe_config 0x48D00 0x0C [0x04 ip_addr, 0x04 ip_netmask, 0x04 ip_gateway] | |||
restrict_spu 0x48C30 0x01 [0x01 flag] | restrict_spu 0x48C30 0x01 [0x01 flag] | ||
sata_param 0x48C31 0x04 [0x04 flag] | sata_param 0x48C31 0x04 [0x04 flag] | ||
os_bank_indicator 0x48C24 0x01 [0x01 flag] | |||
cellos_spu_configure 0x48C33 0x04 [0x04 config] | cellos_spu_configure 0x48C33 0x04 [0x04 config] | ||
flash_ext_format 0x48C13 0x01 [0x01 flag] | |||
cellos_flags 0x48C0F 0x02 [0x02 flags] | |||
qaf_enable 0x48C0A 0x01 [0x01 flag] | |||
UNKNOWN (debug?) 0x48C08 0x01 [0x01 flag] | |||
fself_ctrl 0x48C06 0x01 [0x01 flag] | |||
select_dgbe_device 0x48C03 0x01 [0x01 index] | |||
os_boot_order_flag 0x48C00 0x01 [0x01 flag] | |||
qa_token 0x48D3E 0x50 [0x50 token] | |||
UNKNOWN 0x48804 0x04 [0x04 value] | |||
UNKNOWN 0x48D20 0x08 [0x08 value] | |||
rsx.rdcy.7 0x48CB8 0x08 [0x08 value] | |||
rsx.rdcy.6 0x48CB0 0x08 [0x08 value] | |||
rsx.rdcy.5 0x48CA8 0x08 [0x08 value] | |||
rsx.rdcy.4 0x48CA0 0x08 [0x08 value] | |||
rsx.rdcy.3 0x48C98 0x08 [0x08 value] | |||
rsx.rdcy.2 0x48C90 0x08 [0x08 value] | |||
rsx.rdcy.1 0x48C88 0x08 [0x08 value] | |||
rsx.rdcy.0 0x48C80 0x08 [0x08 value] | |||
be_nclck_flag2 0x48C23 0x01 [0x01 flag] | |||
be_nclck_flag1 0x48C22 0x01 [0x01 flag] | |||
select_net_device 0x48C02 0x01 [0x01 index] | |||
spr_tbuw_value 0x48C35 0x08 [0x08 value] | spr_tbuw_value 0x48C35 0x08 [0x08 value] | ||
bootrom_trace_level 0x48C11 0x01 [0x01 level] | |||
</pre> | </pre> | ||
== System Data | == System Data From EEPROM == | ||
Here is the list of possible | Here is the list of possible EEPROM offsets: | ||
{|class="wikitable" | {|class="wikitable" | ||
|- | |- | ||
! Index !! SC EEPROM | ! Index !! SC EEPROM Offset !! Size Of Data !! Description | ||
|- | |- | ||
| 0 || 0x48D20 || 6 ||? | | 0 || 0x48D20 || 6 ||? | ||
Line 587: | Line 396: | ||
|- | |- | ||
| 3 || 0x48D38 || 6 ||? | | 3 || 0x48D38 || 6 ||? | ||
|- | |- | ||
| 4 || 0x48D00 || 4 ||? | |||
|- | |- | ||
| | | 5 || 0x48D04 || 4 ||? | ||
|- | |- | ||
| | | 6 || 0x48D08 || 4 ||? | ||
|} | |} | ||
== Dumpable | == Dumpable EEPROM Offset - Block ID and Block Offset Mapping Table (NVS Service) == | ||
Right now we only have read access to some portions of the eeprom to have access to this regions DM needs to be patched, see section dumping eeprom | |||
{|class="wikitable" | {|class="wikitable" | ||
|- | |- | ||
! | ! EEPROM Offset !! Block ID !! Block Offset !! Description !! Physical Offset | ||
|- | |- | ||
| | | 0x48000 - 0x480FF || 0x00 || 0x48000 - 0x480FF || ? || 0x7000 | ||
|- | |- | ||
| | | 0x48800 - 0x488FF || 0x01 || 0x48800 - 0x488FF || Bluray Drive Area || 0x7100 | ||
|- | |- | ||
| | | 0x48C00 - 0x48CFF || 0x02 || 0x48C00 - 0x48CFF || Contains flags and tokens/ see above || 0x7200 | ||
|- | |- | ||
| | | 0x48D00 - 0x48DFF || 0x03 || 0x48D00 - 0x48DFF || System Data Region || 0x7300 | ||
|- | |- | ||
| | | 0x2F00 - 0x2FFF || 0x10 || 0x2F00 - 0x2FFF || "Industry Area" aka OS Version Area || 0x2F00 | ||
|- | |- | ||
| | | 0x3000 - 0x30FF || 0x20 || 0x3000 - 0x30FF || "CS Area" || 0x3000 | ||
|- | |||
| | |||
|- | |- | ||
| All other offsets || Invalid || Invalid || ? || | |||
|} | |} | ||
= | =Dumping your SC EEPROM= | ||
== | ==Linux== | ||
First you need graf_chokolo kernel ps3dm-utils and linux_hv_scripts. | |||
If you are ready. | |||
Patch DM using linux_hv_scripts | |||
Patch DM using linux_hv_scripts | |||
<pre> | <pre> | ||
Line 739: | Line 441: | ||
</pre> | </pre> | ||
Read the data from the region you want for example (see tables above) | Read the data from the region you want for example (see tables above) | ||
<pre> | <pre> | ||
Line 745: | Line 447: | ||
</pre> | </pre> | ||
You can see some coolstuff containing dumps | You can see some coolstuff that containing dumps | ||
= Hashes = | =Hashes= | ||
Where exactly the hashes are stored is still a secret | Where exactly the hashes are stored is still a secret, it is said that those hashes are stored in SC EEPROM | ||
To retrieve the information about the packages you have installed you can also use ps3d_utils | To retrieve the information about the packages you have installed you can also use ps3d_utils | ||
== Linux == | ==Linux== | ||
=== Installed Package info === | ===Installed Package info=== | ||
<pre> | <pre> | ||
Line 769: | Line 471: | ||
0003004100000000 | 0003004100000000 | ||
</pre> | </pre> | ||
get_pkg_info 2 - Revoke List for program | get_pkg_info 2 - Revoke List for program | ||
Line 775: | Line 477: | ||
0003004100000000 | 0003004100000000 | ||
</pre> | </pre> | ||
get_pkg_info 3 - Revoke list for package | get_pkg_info 3 - Revoke list for package | ||
<pre> | <pre> | ||
0002003000000000 | 0002003000000000 | ||
</pre> | </pre> | ||
get_pkg_info 4 | get_pkg_info 4 | ||
<pre> | <pre> | ||
deadbeaffacebabe | deadbeaffacebabe | ||
</pre> | </pre> | ||
get_pkg_info 5 | get_pkg_info 5 | ||
<pre> | <pre> | ||
deadbeaffacebabe | deadbeaffacebabe | ||
Line 795: | Line 497: | ||
get_pkg_info 6 - Firmware Package | get_pkg_info 6 - Firmware Package | ||
<pre> | <pre> | ||
0003005000000000 | 0003005000000000 | ||
</pre> | </pre> | ||
You can find more information about this in [[Hypervisor Reverse Engineering]] | |||
What algorithm is used and what exactly is hashed is still unknown | |||
===Hashes=== | |||
What algorithm is used and what exactly is hashed is still unknown (seems that the content of files is hashed by the SHA-1). | |||
<pre> | <pre> | ||
Line 816: | Line 520: | ||
region_data 0 - | region_data 0 - Core OS package | ||
<pre> | <pre> | ||
00 03 00 41 00 00 00 00 00 c3 eb 01 96 24 d0 1c 26 14 f3 1c a4 a2 ff ce 81 77 3a 4c f8 42 86 04 ee 34 bb db be 1c a7 51 e5 59 f1 95 61 07 a5 eb | 00 03 00 41 00 00 00 00 00 c3 eb 01 96 24 d0 1c 26 14 f3 1c a4 a2 ff ce 81 77 3a 4c f8 42 86 04 ee 34 bb db be 1c a7 51 e5 59 f1 95 61 07 a5 eb | ||
</pre> | </pre> | ||
region_data 1 | region_data 1 | ||
<pre> | <pre> | ||
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff | ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff | ||
</pre> | </pre> | ||
region_data 2 | region_data 2 | ||
<pre> | <pre> | ||
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff | ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff | ||
</pre> | </pre> | ||
region_data 3 | region_data 3 //Revoke List for program? | ||
<pre> | <pre> | ||
00 03 00 41 00 00 00 00 80 41 f6 b8 f2 d5 30 60 59 35 49 d7 f0 3d 58 57 87 00 88 11 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff | 00 03 00 41 00 00 00 00 80 41 f6 b8 f2 d5 30 60 59 35 49 d7 f0 3d 58 57 87 00 88 11 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff | ||
</pre> | </pre> | ||
region_data 4 | region_data 4 | ||
<pre> | <pre> | ||
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff | ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff | ||
</pre> | </pre> | ||
region_data 5 | region_data 5 //Revoke List for package? | ||
<pre> | <pre> | ||
00 02 00 30 00 00 00 00 ba 6e 1c d5 5f 48 5b 8b 3f cc c8 60 75 ce f6 83 b2 20 dc f4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | 00 02 00 30 00 00 00 00 ba 6e 1c d5 5f 48 5b 8b 3f cc c8 60 75 ce f6 83 b2 20 dc f4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ||
</pre> | </pre> | ||
Line 880: | Line 560: | ||
<pre> | <pre> | ||
de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be | de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be | ||
</pre> | </pre> | ||
Line 890: | Line 566: | ||
<pre> | <pre> | ||
de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be | de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be | ||
</pre> | </pre> | ||
Line 899: | Line 571: | ||
<pre> | <pre> | ||
00 03 00 50 | 00 03 00 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ||
</pre> | </pre> | ||
Line 910: | Line 578: | ||
<pre> | <pre> | ||
de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be | de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be | ||
</pre> | </pre> | ||
Line 920: | Line 584: | ||
<pre> | <pre> | ||
de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be | de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be | ||
</pre> | </pre> | ||
Line 930: | Line 590: | ||
<pre> | <pre> | ||
de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be | de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be | ||
</pre> | </pre> | ||
Line 940: | Line 596: | ||
<pre> | <pre> | ||
de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be | de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be | ||
</pre> | </pre> | ||
Line 950: | Line 602: | ||
<pre> | <pre> | ||
de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be | de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be | ||
</pre> | </pre> | ||
Line 960: | Line 608: | ||
<pre> | <pre> | ||
de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be | de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be | ||
</pre> | </pre> | ||
Line 970: | Line 614: | ||
<pre> | <pre> | ||
de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be | de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be de ad be af fa ce ba be | ||
</pre> | </pre> | ||
region_data 16 - 47? | region_data 16 - 47? | ||
= Dumped data = | =Dumped data= | ||
Here is an example of data from syscon which stores VTRM block key, SRK/SRH, region data, etc. | |||
<pre> | <pre> | ||
0x0000: 00 00 00 03 C0 00 00 FF 00 00 00 00 00 00 00 00 ................ | 0x0000: 00 00 00 03 C0 00 00 FF 00 00 00 00 00 00 00 00 ................ | ||
0x0010: 01 A2 F6 6C 26 54 1A 54 CE A3 F9 71 50 2B A8 20 ...l&T.T...qP+. | 0x0010: 01 A2 F6 6C 26 54 1A 54 CE A3 F9 71 50 2B A8 20 ...l&T.T...qP+. | ||
0x0020: 33 0E F4 5F 77 19 96 A6 7A 84 5D C9 AE B9 50 73 3.._w...z.]...Ps | 0x0020: 33 0E F4 5F 77 19 96 A6 7A 84 5D C9 AE B9 50 73 3.._w...z.]...Ps | ||
0x0030: AE 45 5D 8E 6C BB 80 4D 7E C5 BF A4 AC 8E E1 E5 .E].l..M~....... | 0x0030: AE 45 5D 8E 6C BB 80 4D 7E C5 BF A4 AC 8E E1 E5 .E].l..M~....... | ||
0x0040: 82 9B 0A 57 9A 40 D9 0C 00 00 00 00 00 00 00 00 ...W.@.......... | 0x0040: 82 9B 0A 57 9A 40 D9 0C 00 00 00 00 00 00 00 00 ...W.@.......... | ||
0x0050: 7F 03 00 94 B4 7C B6 50 51 E5 84 30 4D 51 77 7C | 0x0050: 7F 03 00 94 B4 7C B6 50 51 E5 84 30 4D 51 77 7C ....|.PQ..0MQw| | ||
0x0060: 7C 03 00 94 B4 7C B6 50 51 E5 84 30 4D 51 77 7C |....|.PQ..0MQw| | 0x0060: 7C 03 00 94 B4 7C B6 50 51 E5 84 30 4D 51 77 7C |....|.PQ..0MQw| | ||
0x0070: 7D 03 00 94 B4 7C B6 50 51 E5 84 30 4D 51 77 7C }....|.PQ..0MQw| | 0x0070: 7D 03 00 94 B4 7C B6 50 51 E5 84 30 4D 51 77 7C }....|.PQ..0MQw| | ||
0x0080: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................ | 0x0080: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................ | ||
0x0090: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................ | 0x0090: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................ | ||
0x00A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................ | 0x00A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................ | ||
0x00B0: 00 03 00 55 00 00 00 00 50 12 F0 AD 3A 4F 9F 1B ...U....P...:O.. | 0x00B0: 00 03 00 55 00 00 00 00 50 12 F0 AD 3A 4F 9F 1B ...U....P...:O.. | ||
0x00C0: F9 F1 E1 D3 64 85 D4 01 19 9D 76 9E 5C 33 8D FE ....d.....v.\3.. | 0x00C0: F9 F1 E1 D3 64 85 D4 01 19 9D 76 9E 5C 33 8D FE ....d.....v.\3.. | ||
0x00D0: 39 75 10 9B 73 43 69 89 2B F6 EE 53 15 4A 3B 06 9u..sCi.+..S.J;. | 0x00D0: 39 75 10 9B 73 43 69 89 2B F6 EE 53 15 4A 3B 06 9u..sCi.+..S.J;. | ||
0x00E0: 00 03 00 55 00 00 00 00 7B C9 65 97 CF 0D 20 4B ...U....{.e... K | 0x00E0: 00 03 00 55 00 00 00 00 7B C9 65 97 CF 0D 20 4B ...U....{.e... K | ||
0x00F0: BB 6A B1 B9 B0 71 83 27 79 6F 16 08 FF FF FF FF .j...q.'yo...... | 0x00F0: BB 6A B1 B9 B0 71 83 27 79 6F 16 08 FF FF FF FF .j...q.'yo...... | ||
------------------------------------------------------------------------- | |||
0x0100: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................ | |||
0x0110: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................ | |||
0x0120: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................ | |||
0x0130: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................ | |||
0x0140: 00 01 00 00 00 00 00 00 B0 64 53 92 7F 5E 29 47 .........dS.^)G | |||
0x0150: 9C BC 84 58 4A F2 ED 0B 50 E1 BE F3 FF FF FF FF ...XJ...P....... | |||
0x0160: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................ | |||
0x0170: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................ | |||
0x0180: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................ | |||
0x0190: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................ | |||
0x01A0: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | |||
0x01B0: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | |||
0x01C0: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | |||
0x01D0: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | |||
0x01E0: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | |||
0x01F0: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | |||
------------------------------------------------------------------------- | |||
0x0200: 00 03 00 50 00 00 00 00 00 00 00 00 00 00 00 00 ...P............ | |||
0x0210: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |||
0x0220: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |||
0x0230: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | |||
0x0240: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | |||
0x0250: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | |||
0x0260: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | |||
0x0270: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | |||
0x0280: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | |||
0x0290: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | |||
0x02A0: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | |||
0x02B0: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | |||
0x02C0: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | |||
0x02D0: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | |||
0x0300: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | 0x02E0: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | ||
0x0310: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | 0x02F0: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | ||
0x0320: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | ------------------------------------------------------------------------- | ||
0x0330: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | 0x0300: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | ||
0x0340: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | 0x0310: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | ||
0x0350: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | 0x0320: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | ||
0x0360: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | 0x0330: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | ||
0x0370: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | 0x0340: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | ||
0x0350: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | |||
0x0360: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | |||
0x0370: DE AD BE AF FA CE BA BE DE AD BE AF FA CE BA BE ................ | |||
0x0380: 42 03 00 94 B4 7C B6 50 51 E5 84 30 4D 51 77 7C B....|.PQ..0MQw| | 0x0380: 42 03 00 94 B4 7C B6 50 51 E5 84 30 4D 51 77 7C B....|.PQ..0MQw| | ||
0x0390: 43 03 00 94 B4 7C B6 50 51 E5 84 30 4D 51 77 7C C....|.PQ..0MQw| | 0x0390: 43 03 00 94 B4 7C B6 50 51 E5 84 30 4D 51 77 7C C....|.PQ..0MQw| | ||
Line 1,413: | Line 690: | ||
0x03E0: 44 03 00 94 B4 7C B6 50 51 E5 84 30 4D 51 77 7C D....|.PQ..0MQw| | 0x03E0: 44 03 00 94 B4 7C B6 50 51 E5 84 30 4D 51 77 7C D....|.PQ..0MQw| | ||
0x03F0: 45 03 00 94 B4 7C B6 50 51 E5 84 30 4D 51 77 7C E....|.PQ..0MQw| | 0x03F0: 45 03 00 94 B4 7C B6 50 51 E5 84 30 4D 51 77 7C E....|.PQ..0MQw| | ||
</pre> | </pre> | ||
== More samples == | == More samples == | ||
* | * https://dl.dropboxusercontent.com/u/35197530/bin/eeprom.bin | ||
=Tokens= | |||
All tokens are tied | Here we will document the different types off tokens known in the PS3 | ||
All tokens are tied? encrypted? using EID0. | |||
They enable additional repository nodes. | |||
==List== | |||
{| class="wikitable FCK__ShowTableBorders" | {| class="wikitable FCK__ShowTableBorders" | ||
|- | |- | ||
Line 1,640: | Line 709: | ||
| qa_token || sc_eeprom - 0x48D3E || 0x50 || spu_token_processor.self || | | qa_token || sc_eeprom - 0x48D3E || 0x50 || spu_token_processor.self || | ||
|- | |- | ||
| user_token || | | user_token || ? || ? || spu_utoken_processor.self || Encrypted/Signed | ||
|- | |- | ||
| token_seed || | | token_seed || ? || ? || ? || This is used to create the token with EID0 | ||
|} | |} | ||
== | ==Token Seed== | ||
? | |||
== | ==Structure== | ||
This section has to be corrected, is only based on debug strings, we need to decrypt the tokens | |||
===Token Seed=== | |||
=== Token Seed === | |||
? | ? | ||
=== QA Token === | ===QA Token=== | ||
===User Token=== | |||
{| class="wikitable FCK__ShowTableBorders" | {| class="wikitable FCK__ShowTableBorders" | ||
|- | |- | ||
! | ! Address !! Size !! Description | ||
|- | |- | ||
| ? || ? || m_magic | | ? || ? || m_magic | ||
Line 1,704: | Line 742: | ||
| ? || ? || m_size | | ? || ? || m_size | ||
|- | |- | ||
| ? || ? || | | ? || ? || m_capability | ||
|- | |- | ||
| ? || ? || m_expire_date | | ? || ? || m_expire_date | ||
|- | |- | ||
| ? || ? || | | ? || ? || m_idps? | ||
|- | |- | ||
| ? || ? || m_attribute | | ? || ? || m_attribute | ||
Line 1,715: | Line 753: | ||
|} | |} | ||
For every | For every atribute in the token | ||
{| class="wikitable FCK__ShowTableBorders" | {| class="wikitable FCK__ShowTableBorders" | ||
|- | |- | ||
! | ! Address !! Size !! Description | ||
|- | |- | ||
| ? || ? || attr:m_type | | ? || ? || attr:m_type | ||
Line 1,732: | Line 770: | ||
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;" | {| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;" | ||
|- | |- | ||
! style="background-color:red | ! style="background-color:red;" | <span style="background-color:lightred; color:white; font-size:200%; ">Warning</span> | ||
|- | |- | ||
| <span style="white; color:red | | style="background-color:white;" | <span style="white; color:red; font-size:150%; text-align:center; ">You can use this method at your own risk. Author is not responsible for any hardware damages and failures. | ||
|} | |} | ||
== Bus Pirate 3 method by: ([[User_talk:Zer0Tolerance|Zer0Tolerance]]) == | == Bus Pirate 3 method by: ([[User_talk:Zer0Tolerance|Zer0Tolerance]]) == | ||
=== | === You need === | ||
1) PS3 motherboard. I am using '''DIA-001'''. may be we can dump it from another boards, but it is unknown yet. | |||
1) PS3 motherboard. I am using '''DIA-001'''. | |||
2) Device that can work with SPI interface and send any commands. I am using a Bus Pirate v3.6 with connectors. | 2) Device that can work with SPI interface and send any commands. I am using a Bus Pirate v3.6 with connectors. | ||
Line 1,839: | Line 786: | ||
4) Wires (see below). | 4) Wires (see below). | ||
5) Personal conputer with installed HxD, Putty | 5) Personal conputer with installed HxD, Putty, Notepad++ | ||
6) /dev/Hands ;) | 6) /dev/Hands ;) | ||
Line 1,845: | Line 792: | ||
=== Preparation === | === Preparation === | ||
Find the test points on the motherboard using | Find the test points on the motherboard using this picture. | ||
[[File:DIA-001 SysCon EPROM Interface.png|thumbnail|none]] | [[File:DIA-001 SysCon EPROM Interface.png|thumbnail|none]] | ||
All points are covered with varnish. You need to carefully remove the varnish to the copper and solder the wires to it. | All points are covered with varnish. You need to carefully remove the varnish to the copper and solder the wires to it. | ||
Line 1,869: | Line 811: | ||
| MISO || DO | | MISO || DO | ||
|- | |- | ||
| 3V3 || RBB | | 3V3 || WCB, RBB | ||
|- | |- | ||
| GND || | | GND || Any Ground Point | ||
|} | |} | ||
Make sure that the battery is attached to the motherboard. | Make sure that the battery is attached to the motherboard. | ||
Plug your Bus | Plug your Bus pirate to the USB port on your PC using mini_USB_to_USB cable. (I am using the cable from the ps3 gamepad) | ||
It should be done like this, see the following picture: | |||
[[File:Dumping SC EEPROM using Bus Pirate v3.6.JPG|thumbnail|none]] | [[File:Dumping SC EEPROM using Bus Pirate v3.6.JPG|thumbnail|none]] | ||
=== Setup software === | === Setup software === | ||
1) Install the driver for the Bus Pirate and setup your virtual COM port for it using | 1) Install the driver for the Bus Pirate and setup your virtual COM port for it using following table: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
Line 1,908: | Line 850: | ||
Serial line: COM3 (choose your virtual COM port) | Serial line: COM3 (choose your virtual COM port) | ||
Speed | Speed: 115200 | ||
Logging params: | Logging params: | ||
Line 1,917: | Line 859: | ||
Now click Open button and setup mode for bus pirate using following commands: | Now click Open button and setup mode for bus pirate using following commands: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
Line 1,951: | Line 892: | ||
You can use Notepad++ and Hex Editor like HxD to convert the dump to binary format. | You can use Notepad++ and Hex Editor like HxD to convert the dump to binary format. | ||
== Arduino Mega method by: ([[User_talk:Abkarino|Abkarino]]) == | == Arduino Mega method by: ([[User_talk:Abkarino|Abkarino]]) == | ||
I had build my own Syscon EEPROM flasher based on open source hardware "'''Arduino Mega'''" and some resistors. | I had build my own Syscon EEPROM flasher based on open source hardware "'''Arduino Mega'''" and some resistors. | ||
This flasher will allow you fully read/write to your Syscon EEPROM (FAT consoles only till now). | |||
=== You need === | |||
1) PS3 motherboard. I had used '''SEM-0001''' board by desoldering Syscon chip form it but you can use, '''DIA-001''' for example without desoldering Syscon chip since all eeprom pins had a test points in the board it self. | |||
=== | |||
1) PS3 motherboard. I had used '''SEM-0001''' board by desoldering Syscon chip form it but you can use, '''DIA-001''' for example without desoldering Syscon chip since all | |||
2) Arduino Mega or any Arduino board. | 2) Arduino Mega or any Arduino board. | ||
Line 1,969: | Line 907: | ||
4) Soldering station. | 4) Soldering station. | ||
5) Wires & Bread board ( | 5) Wires & Bread board (Optional). | ||
6) Any PC that have terminal software like Putty, RealTerm and so on to access serial port, and any Hex Editor like HxD. | 6) Any PC that have terminal software like Putty, RealTerm and so on to access serial port, and any Hex Editor like HxD. | ||
Line 1,977: | Line 915: | ||
Find the test points on the motherboard using this picture. | Find the test points on the motherboard using this picture. | ||
[[File:DIA-001 SysCon EPROM Interface.png|thumbnail|none]] | [[File:DIA-001 SysCon EPROM Interface.png|thumbnail|none]] | ||
Or if you have a very good soldering skills and tools to desolder your SysCon then you can desolder your SysCon and solder your wires to it directly. | |||
Or if you have very good soldering skills and tools to desolder your SysCon then you can desolder your SysCon and solder your wires to it directly. | |||
All points are covered with varnish. You need to carefully remove the varnish to the copper and solder the wires to it. | All points are covered with varnish. You need to carefully remove the varnish to the copper and solder the wires to it. | ||
Line 2,005: | Line 942: | ||
|} | |} | ||
Make sure that the battery is attached to the motherboard if you will dump/flash SysCon EEPROM in board. | |||
=== Wiring Diagram & Photos === | === Wiring Diagram & Photos === | ||
Line 2,020: | Line 951: | ||
=== Arduino Sketch Source Code === | === Arduino Sketch Source Code === | ||
Here is my Arduino Mega sketch source code to allow you to read/write/erase PS3 Syscon EEPROM. | |||
http://pastie.org/10004682#8,19 | |||
{{Reverse engineering}}<noinclude>[[Category:Main]]</noinclude> | {{Reverse engineering}}<noinclude>[[Category:Main]]</noinclude> |