Editing Downgrading with PSgrade Dongle
Jump to navigation
Jump to search
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.
| Latest revision | Your text | ||
| Line 1: | Line 1: | ||
Note: '''superseded by [http://psx-scene.com/forums/content/factoryservicemode-tool-v0- | [[Category:Software]] | ||
Note: '''superseded by [http://psx-scene.com/forums/content/factoryservicemode-tool-v0-1-jigless-factory-service-mode-1922/ FactoryServiceMode Tool v0.1 - JIGless Factory/Service Mode] :)''' | |||
{{warning|content=PSgrade / JIG only works with 3.55 and lower. Because of the inability to gain private keys since 3.56 and later there is no means to ever make it working on official firmwares 3.56 and higher | {{warning|content=PSgrade / JIG only works with 3.55 and lower. Because of the inability to gain private keys since 3.56 and later there is no means to ever make it working on official firmwares 3.56 and higher | ||
}} | }}<br /><br /><br /><br /><br /> | ||
==Notes from the author== | ==Notes from the author== | ||
* When this guide was written, no 3.55 factory consoles existed, use extreme caution when trying on modern consoles with versionchecks in metldr. | * When this guide was written, no 3.55 factory consoles existed, use extreme caution when trying on modern consoles with versionchecks in metldr. | ||
* This guide has been superceded by QA downgrading which do not have the problem of BluRay Movie playback loss on NAND consoles. | * This guide has been superceded by QA downgrading which do not have the problem of BluRay Movie playback loss on NAND consoles. | ||
* Although archaic/catched by progress, this guide should have been earlier on | * Although archaic/catched by progress, this guide should have been earlier on ps3devwiki imo for historic completness. | ||
* This guide was written with Eclips3 dongle as target but ANY PSgrade capable device can be used. | * This guide was written with Eclips3 dongle as target but ANY PSgrade capable device can be used. | ||
** PSGrade compiled for various USB development boards : [http://www.multiupload.com/80LV477KT0 psgrade-hex.rar (136.07 KB)] [http://www.mirrorcreator.com/files/NI7JTULE/Psgrade-hex.rar_links | ** PSGrade compiled for various USB development boards : [http://www.multiupload.com/80LV477KT0 psgrade-hex.rar (136.07 KB)] [http://www.mirrorcreator.com/files/NI7JTULE/Psgrade-hex.rar_links] | ||
*** includes hex files for: | *** includes hex files for: | ||
**** at90usbkey at90usb1287 8mhz | **** at90usbkey at90usb1287 8mhz | ||
| Line 36: | Line 37: | ||
**** xplain at90usb1287 8mhz | **** xplain at90usb1287 8mhz | ||
** There is a large list of alternative Jailbreak/PSgrade devices listed on the [[Talk:Downgrading_with_PSgrade_Dongle|talkpage]] | ** There is a large list of alternative Jailbreak/PSgrade devices listed on the [[Talk:Downgrading_with_PSgrade_Dongle|talkpage]] | ||
converted guide in wiki formatting: | converted guide in wiki formatting: | ||
| Line 44: | Line 43: | ||
==Download the required files== | ==Download the required files== | ||
http://www. | http://www.ps3devwiki.com/files/PSGrade/Eclips3/ | ||
Updated to V1.4c with DowngraderV1.1. Dec 10, 2010 | Updated to V1.4c with DowngraderV1.1. Dec 10, 2010 | ||
| Line 60: | Line 53: | ||
*[http://www.multiupload.com/P2KK8GE1VU Eclipse Updater v14c] | *[http://www.multiupload.com/P2KK8GE1VU Eclipse Updater v14c] | ||
*[ | *[http://www.sendspace.com/file/qlfoyi Downgrader files] ([http://torrents.thepiratebay.org/6020563/Ps3_Downgrader_Files.6020563.TPB.torrent torrent]): | ||
**[ | **[http://www.multiupload.com/4K18Y109WI Modified FW 3.41 PUP] | ||
**[ | **[http://www.multiupload.com/779HTRMBW8 Downgrader SELF files] : | ||
***[ | ***[http://www.multiupload.com/ZHJMPSMLYR Lv2Diag.self (File 1)] | ||
***[ | ***[http://www.multiupload.com/VGQTFV56CO Lv2Diag.self (File 2)] | ||
[[File:Eclipse-Downgrader-Pack-V1.4c.png|Eclipse Downgrader Pack V1.4c]] | [[File:Eclipse-Downgrader-Pack-V1.4c.png|Eclipse Downgrader Pack V1.4c]] | ||
===3.55 addon=== | ===3.55 addon=== | ||
[ | [http://www.mediafire.com/?802y3n6e14lpbb1 Lv2Diag.self (File 2)] to get out of service mode in 3.55<br /> | ||
[ | [http://www.multiupload.com/TQEVKK7II3 Generic 3.55 LV2diag.self package] | ||
=== Eclipse Updater v1.5 === | === Eclipse Updater v1.5 === | ||
[ | [http://www.multiupload.com/084FKR7D5S Eclips3-1.5FWUpdater.rar (1.71 MB)] | ||
==Using the Eclipse Updater / Downgrader== | ==Using the Eclipse Updater / Downgrader== | ||
| Line 83: | Line 76: | ||
The Eclipse Updater / Downgrader application has 5 functions: | The Eclipse Updater / Downgrader application has 5 functions: | ||
#Normal update:<br />For a normal jailbreaking update of FW 3.41, select "ECLIPSE FIRMWARE V1.4" and press the START button in the application.<br /> | # Normal update:<br />For a normal jailbreaking update of FW 3.41, select "ECLIPSE FIRMWARE V1.4" and press the START button in the application.<br /> | ||
#JIG / Downgrader Dongle:<br />To use the Eclipse dongle as a JIG (for FW 3.50 and below) for downgrading your PS3 System Software (FW), just select "DOWNGRADER V1.1" and press the START button in the application.<br /> | # JIG / Downgrader Dongle:<br />To use the Eclipse dongle as a JIG (for FW 3.50 and below) for downgrading your PS3 System Software (FW), just select "DOWNGRADER V1.1" and press the START button in the application.<br /> | ||
#any HEX: <br />If you want to use HEX's compiled by your own (for any JailBreakable FW), select "IMPORT PSGROOVE/PSFREEDOM FIRMWARE" and press the START button in the application.<br /> | # any HEX: <br />If you want to use HEX's compiled by your own (for any JailBreakable FW), select "IMPORT PSGROOVE/PSFREEDOM FIRMWARE" and press the START button in the application.<br /> | ||
# any PAYLOAD.BIN:<br />If you want to import PAYLOAD.BIN's, select "IMPORT PAYLOAD" and press the START button in the application.<br /> | # any PAYLOAD.BIN:<br />If you want to import PAYLOAD.BIN's, select "IMPORT PAYLOAD" and press the START button in the application.<br /> | ||
#Erase:<br />If you want to erase the Eclipse Dongle, with only the default bootloader present, select "ERASE ONLY" and press the START button in the application.<br /> | # Erase:<br />If you want to erase the Eclipse Dongle, with only the default bootloader present, select "ERASE ONLY" and press the START button in the application.<br /> | ||
NB: If your computer is not up to date, you'll have to download the [http://www.microsoft.com/downloads/en/details.aspx?FamilyID=a7b7a05e-6de6-4d3a-a423-37bf0912db84&displaylang=en latest Microsoft Updated Libraries], necessary on some OS to avoid the "MSVCR100.dll" error: [http://www.eclipsemod.com/downloads/vcredist_x86.exe vcredist_x86.exe]. | NB: If your computer is not up to date, you'll have to download the [http://www.microsoft.com/downloads/en/details.aspx?FamilyID=a7b7a05e-6de6-4d3a-a423-37bf0912db84&displaylang=en latest Microsoft Updated Libraries], necessary on some OS to avoid the "MSVCR100.dll" error: [http://www.eclipsemod.com/downloads/vcredist_x86.exe vcredist_x86.exe]. | ||
==Prepare the Eclipse as an JIG / downgrader dongle== | ==Prepare the Eclipse as an JIG / downgrader dongle== | ||
| Line 108: | Line 102: | ||
Warning notes: | Warning notes: | ||
*Do not UPdate in Factory/Service Mode ([http://pastie.org/1358201 results in "8002f14e" error]), only downgrade or same version! Only UPgrade in Retail mode! | * Do not UPdate in Factory/Service Mode ([http://pastie.org/1358201 results in "8002f14e" error]), only downgrade or same version! Only UPgrade in Retail mode! | ||
*Do not use Factory/Service Mode to enforce installing Debug updates on Retail PS3's! ([http://www.ps3hax.net/2010/12/tutorial-how-to-unbrick-your-ps3-if-you-have-the-5-beeps-whilst-using-service-mode-by-gliitch/ *fix*]) | *Do not use Factory/Service Mode to enforce installing Debug updates on Retail PS3's! ([http://www.ps3hax.net/2010/12/tutorial-how-to-unbrick-your-ps3-if-you-have-the-5-beeps-whilst-using-service-mode-by-gliitch/ *fix*]) | ||
*Do not downgrade if you use the PS3 for playing Blu-Ray movies! (fix: you need to restore the backup after downgrade you have made of /dev_flash2 and /dev_flash3 before downgrading). Models affected: all 256MB NAND models (CECHA up and including CECHG, log after downgrade contains 'vflash disabled'). 16MB NOR models are unaffected (CECHH and higher/newer are unaffected, log after downgrade contains 'vflash enabled') and can still play bluray movies after downgrade. | *Do not downgrade if you use the PS3 for playing Blu-Ray movies! (fix: you need to restore the backup after downgrade you have made of /dev_flash2 and /dev_flash3 before downgrading). Models affected: all 256MB NAND models (CECHA up and including CECHG, log after downgrade contains 'vflash disabled'). 16MB NOR models are unaffected (CECHH and higher/newer are unaffected, log after downgrade contains 'vflash enabled') and can still play bluray movies after downgrade. | ||
| Line 122: | Line 116: | ||
[[File:PS3-factory-service-mode-for-downgrade.png|Factory/Service Mode]]<br /> | [[File:PS3-factory-service-mode-for-downgrade.png|Factory/Service Mode]]<br /> | ||
Remarks: | Remarks: | ||
*If you are using a component cable the image might be garbled. | * If you are using a component cable the image might be garbled. | ||
*If you are using HDMI, you don't have any screenoutput at all after the "press PS-button" message.<!--// chaudy : //--> (note: conflicting reports on HDMI working or not in FSM) | * If you are using HDMI, you don't have any screenoutput at all after the "press PS-button" message.<!--// chaudy : //--> (note: conflicting reports on HDMI working or not in FSM) | ||
</li> | </li> | ||
| Line 132: | Line 126: | ||
[[File:Downgrader-Pendrive-Contents.png|Downgrader Pendrive Contents]]<br /> | [[File:Downgrader-Pendrive-Contents.png|Downgrader Pendrive Contents]]<br /> | ||
=== Problem solving / tips:=== | ===Problem solving / tips:=== | ||
* Don't use any USB Mass Storage Device with enhanced functions as: encryption, fingerprintreader, U3, pincode etc. | * Don't use any USB Mass Storage Device with enhanced functions as: encryption, fingerprintreader, U3, pincode etc. | ||
*Don't use USB Mass Storage Devices with a long initialisation time (e.g. some MP3 players) | * Don't use USB Mass Storage Devices with a long initialisation time (e.g. some MP3 players) | ||
*Don't use multipartitioned USB Mass Storage Devices, only use 1 single primary FAT32 partition. | * Don't use multipartitioned USB Mass Storage Devices, only use 1 single primary FAT32 partition. | ||
*Make sure they are formatted according to specifications with FAT32 (e.g. HP USB Format Tool - or TOKIWA / Ridgecrop FAT32 formatter) | * Make sure they are formatted according to specifications with FAT32 (e.g. HP USB Format Tool - or TOKIWA / Ridgecrop FAT32 formatter) | ||
*Most USB Mass Storage Devices that'll work effortless with [http://www.pendrivelinux.com/testing-your-system-for-usb-boot-compatibility/ PenDrive Linux], will also work with the PS3 (for downgrading, upgrading, storage of your Game dumps and any normal filestorage under the XMB). Those USB Mass Storage Devices are most likely also the ones giving you the least problems under more exotic platforms like PSX/PSone, PS2/PStwo, Xbox/X360, Gamecube/Wii etc. | * Most USB Mass Storage Devices that'll work effortless with [http://www.pendrivelinux.com/testing-your-system-for-usb-boot-compatibility/ PenDrive Linux], will also work with the PS3 (for downgrading, upgrading, storage of your Game dumps and any normal filestorage under the XMB). Those USB Mass Storage Devices are most likely also the ones giving you the least problems under more exotic platforms like PSX/PSone, PS2/PStwo, Xbox/X360, Gamecube/Wii etc. | ||
<li>Insert the USB Mass Storage Device into the rightmost USB-port (closest to the Blu-Ray reader) of your PS3 (same port we used earlier). Turn the PS3 on and you'll see a black screen but if you look closely the PS3 Hardisk Actity LED will flash. The process takes about 3-4 minutes for the system to install the firmware. Towards the end, the power button on the console will start flashing green and then the console will power off.<br /> | <li>Insert the USB Mass Storage Device into the rightmost USB-port (closest to the Blu-Ray reader) of your PS3 (same port we used earlier). Turn the PS3 on and you'll see a black screen but if you look closely the PS3 Hardisk Actity LED will flash. The process takes about 3-4 minutes for the system to install the firmware. Towards the end, the power button on the console will start flashing green and then the console will power off.<br /> | ||
| Line 147: | Line 141: | ||
</li> | </li> | ||
<li>(Optional) – If you wish to downgrade to any older/other firmware you can follow steps 3, 4, 5 using [ | <li>(Optional) – If you wish to downgrade to any older/other firmware you can follow steps 3, 4, 5 using [http://www.ps3devwiki.com/index.php?title=Playstation_Update_Package_%28PUP%29 any regular full official firmware PUP]. You do not need to use a modified custom firmware anymore now that you're on modified 3.41. Always use a full firmware PUP — using smaller incremental firmware PUPs is not recommended, if at all possible. | ||
===Safe Downgrading Table=== | === Safe Downgrading Table === | ||
You can use the [[SKU Models]] table as a reference for safedowngrading (by not lowering the FW below the FW that was available at releasedate/it came equiped with) or use the [ | You can use the [[SKU Models]] table as a reference for safedowngrading (by not lowering the FW below the FW that was available at releasedate/it came equiped with) or use the [http://www.ps3devwiki.com/index.php?title=Talk:Playstation_Update_Package_%28PUP%29#Using_fake_upgrade_to_get_lowest_firmware_version_info MinVerChk PUP] in Retail mode. | ||
</li> | </li> | ||
</ol> | </ol> | ||
| Line 171: | Line 165: | ||
Problem solving / tip: | Problem solving / tip: | ||
*If you have trouble getting the Jailbreaking firmware back on the Eclips3, use the EclipseUpdaterV1.3 application. | * If you have trouble getting the Jailbreaking firmware back on the Eclips3, use the EclipseUpdaterV1.3 application. | ||
*If you still have troubles, you can try erasing first. | * If you still have troubles, you can try erasing first. | ||