Editing Debian LiveCD

[[Category:Linux]]

=Introduction=

* Sometimes we need to boot Linux without HDD e.g. if you want to experiment with HDD encryption, enable/disable it without causing damage to your data. For such cases we need a LiveCD which doesn't mount HDD at boot.

=Creating Initial System with debootstrap=

<pre>
apt-get install debootstrap

mkdir livecd

debootstrap --arch powerpc squeeze /root/livecd http://ftp.us.debian.org/debian

# Grab a beer and reverse some PS3 stuff in the meantime :)

# Enter chroot environment

mount -t proc none /root/livecd/proc
mount --rbind /dev /root/livecd/dev
LANG=C chroot /root/livecd /bin/bash

export TERM=xterm-color

echo "debian" > /etc/hostname

dpkg-reconfigure tzdata

# Configure network interfaces

cat /etc/network/interfaces
---
auto lo
iface lo inet loopback

allow-hotplug eth0
iface eth0 inet dhcp

allow-hotplug wlan0
iface wlan0 inet dhcp
    wpa-ssid ssid
    wpa-psk psk
-EOF-

# Configure APT

cat /etc/apt/sources.list
---

deb http://ftp.us.debian.org/debian squeeze main
deb-src http://ftp.us.debian.org/debian squeeze main

deb http://security.debian.org squeeze/updates main
deb-src http://security.debian.org squeeze/updates main
-EOF-

aptitude update

aptitude install locales
dpkg-reconfigure locales
aptitude install console-data
dpkg-reconfigure console-data

tasksel install standard
aptitude install binutils gcc make git vim openssh-server sudo wpasupplicant libssl-dev
aptitude  install gcc-spu g++-spu newlib-spu spu-tools

# Make SSH server start at boot so we could ssh to our LiveCD

update-rc.d ssh defaults

aptitude clean
</pre>

=Creating Root Filesystem=

<pre>
cd /root/livecd
mksquashfs * ../root.sfs
</pre>

=Modifying Root Filesystem=

<pre>
cd /root
unsquashfs root.sfs
cd squashfs-root

# Make your changes

mksquashfs * ../root-changed.sfs
</pre>

=Linux 3 Kernel=

* We need a Linux 3 kernel with overlayfs support so we could create a tmpfs over our read-only base filesystem.
* At the moment overlayfs is not supported on Linux 3.5 so it leaves us with Linux 3.4 which doesn't really matter because all my Linux 3 drivers are supported on Linux 3.4 just fine.
* Furthermore, we want to compile PS3 HDD driver as module because in this case we can easily change HDD region flags.

=Initramfs=

<pre>

# Populate initramfs

mkdir initramfs
cd initramfs
mkdir -p bin dev etc lib/modules/3.4.9 mnt proc sbin sys usr

for mod in fat vfat isofs crc-ccitt crc-itu-t lzo_compress udf squashfs overlayfs \
           ps3_gelic ps3stor_lib sg ps3rom usb-common usbcore ehci-hcd ohci-hcd usb-storage; do
    path=`find  /home/glevand/linux-3.4.9-build/lib/modules/3.4.9 -name $mod.ko`
    cp $path lib/modules/3.4.9/
done

# Create initramfs

find . | cpio -H newc -o > ../initramfs.cpio
cd ..
cat initramfs.cpio | gzip > initramfs.cpio.gz
</pre>

=Images=

* vmlinux-3.4.9.xz: http://www.multiupload.nl/9C1XVAB3RU (MD5 c15903c28b4eaff3524f3c32f491e25e)
* root.sfs: http://www.multiupload.nl/NERXNME3JJ (MD5 e2ed20d27092105961507de5d7b49ed3)
* Tools available on the root filesystem: gcc, spu-gcc, spuisofs, spuldrfs, ps3vuart-tools, ps3sed and all my other PS3 Linux drivers. Everything you need to compile and test various PS3 stuff.

==USB==

* initramfs.cpio.gz: http://www.multiupload.nl/KROXJ799N6 (MD5 8da82022b1c2541dc419619e710a0a3f)
* Create '''debianlive''' directory on your USB drive.
* Put vmlinux-3.4.9 (extract xz archive), initramfs.cpio.gz and root.sfs into this directory.

<pre>
$ ls -l /mnt/usb/debianlive/
total 257696
-rwxr-xr-x 1 root root   6746154 Aug 18 17:44 initramfs.cpio.gz
-rwxr-xr-x 1 root root 249835520 Aug 18 17:15 root.sfs
-rwxr-xr-x 1 root root   7288832 Aug 18 17:31 vmlinux-3.4.9
$ ls -l /mnt/usb/
-rwxr-xr-x  1 root root      188 Aug 18 17:30 kboot.conf
</pre>

* And create kboot.conf in the root directory of your USB drive with this content:

<pre>
debianlive=/debianlive/vmlinux-3.4.9 initrd=/debianlive/initramfs.cpio.gz
</pre>

==CDROM==

<pre>
mkdir -p iso/debianlive
cp root.sfs initramfs.cpio.gz vmlinux-3.4.9 iso/debianlive
echo "debianlive=/debianlive/vmlinux-3.4.9 initrd=/debianlive/initramfs.cpio.gz" > iso/kboot.conf
cd iso
mkisofs -R -J -l -o ../debianlive.iso .
cd ..

sudo cdrecord -v dev=/dev/sr0 blank=fast
sudo cdrecord -v dev=/dev/sr0 debianlive.iso
</pre>

=Links=

* http://securityfocus.eu/?p=149