Pinout: Difference between revisions
No edit summary |
(→Accessory Port / EHCI: improve offical usage) |
||
| Line 76: | Line 76: | ||
sceUsbServAccessoryDeactivate. | sceUsbServAccessoryDeactivate. | ||
==== Offical usage ==== | |||
There are only a few documented uses for the accessory port on the PSVita. | |||
===== FCC ===== | |||
[[File:Accessory port adapter.jpg]] | [[File:Fccpdel1001.jpg|thumb|right]] | ||
In the FCC filing for the PDEL-1001 development unit. It seems that some dongle attached to the device is used as part of their hardware testing framework. | |||
===== Accessory to USB adapter ===== | |||
[[File:Accessory port adapter.jpg|thumb|right]] | |||
An Accessory port to USB adapter board was sold on auction sites awhile ago. It comes from a PSVita factory in China that was being repurchased for other things. since production of the PSVita has stopped. | |||
==== Simular Cables ==== | |||
The sheilding on the port is simular to what is used on the Panasonic K1HA14AD0001 camera. | The sheilding on the port is simular to what is used on the Panasonic K1HA14AD0001 camera. | ||
However. The pin layout on this is incorrect and will short the accessory port if plugged into a psvita. | However. The pin layout on this is incorrect and will short the accessory port if plugged into a psvita. | ||
Revision as of 01:07, 5 August 2023
Multi-use port
| Pin | Signal |
|---|---|
| 1 | Another voltage input? |
| 2 | Another voltage input? |
| 3 | GND |
| 4 | Audio output |
| 5 | Audio output |
| 6 | UART RX (CPU/Syscon) |
| 7 | UART TX (CPU/Syscon) |
| 8 | UART CTS (CPU/Syscon) |
| 9 | UART RTS (CPU/Syscon) |
| 10 | ? |
| 11 | headset control GND |
| 12 | headset control data / mic |
| 13 | Unknown, connected to Wolfson Micro WM1803E DAC |
| 14 | GND |
| 15 | Unknown, connected to MB44C026A IC |
| 16 | GND |
| 17 | +5V charge input |
| 18 | +5V charge input |
| 19 | GND |
| 20 | USB D- |
| 21 | USB D+ |
Accessory Port / EHCI
Accessory Port - mstrp1
Accessory Port - mstrp2
Accessory Port - mstrp3
Accessory Port - mstrp4
| Pin | Signal |
|---|---|
| 1 | VCC |
| 2 | D- |
| 3 | D+ |
| 4 | N/C (floating?) |
| 5 | GND |
The accessory port found only on the original Vita models is a custom port USB interface.
It is commonly thought that api to enable the port was removed in 1.69 however. This is not true. Even on the latest firmware the accessory port can be enabled using sceUsbServAccessoryActivate and disabled with sceUsbServAccessoryDeactivate.
Offical usage
There are only a few documented uses for the accessory port on the PSVita.
FCC
In the FCC filing for the PDEL-1001 development unit. It seems that some dongle attached to the device is used as part of their hardware testing framework.
Accessory to USB adapter
An Accessory port to USB adapter board was sold on auction sites awhile ago. It comes from a PSVita factory in China that was being repurchased for other things. since production of the PSVita has stopped.
Simular Cables
The sheilding on the port is simular to what is used on the Panasonic K1HA14AD0001 camera.
However. The pin layout on this is incorrect and will short the accessory port if plugged into a psvita.