Wireless communications: Difference between revisions

From Vita Developer wiki
Jump to navigation Jump to search
No edit summary
 
(One intermediate revision by one other user not shown)
Line 84: Line 84:
| MDM6200 || 3G || HSPA+, GSM/GPRS/EDGE  || Up to 14Mbps || {{No}} || {{Yes}} || gpsOneGen 8 with GLONASS|| USB 2.0 HS Peripheral or Host|| Supported with External Wifi
| MDM6200 || 3G || HSPA+, GSM/GPRS/EDGE  || Up to 14Mbps || {{No}} || {{Yes}} || gpsOneGen 8 with GLONASS|| USB 2.0 HS Peripheral or Host|| Supported with External Wifi
|-
|-
The communication of the Modem appears to be PCIe, instead of the more common (Used on WWAN modems for laptops.) USB interface. So, the Vita might have PCIe available for use along with USB. In case anyone wants to try putting a mPCIe SSD in it or even hook up an external GPU to the Vita.
</br>
Physical Pin Layout:</br>
    Top</br>
    1                                                    51</br>
      --------| |------------------</br>
      --------| |------------------</br>
    2                                                  52</br>
    Bottom</br>
</br>
</br>
Used pins:</br>
Legend:</br>
        * = Connected</br>
        - = Not Connected</br>
</br>
    Top</br>
    1                                                    51</br>
      ********| |******************</br>
      *******-| |--**--***----*----</br>
    2                                                  52</br>
    Bottom</br>
</br>
</br>
Labled pins (Section incomplete):</br>
    Legend:</br>
        S = Signal Pin</br>
        P = Vcc or GND pin</br>
        U = Signal pin pulled up to Vcc</br>
        D = Signal pin pulled down to GND</br>
        - = Not Connected</br>
</br>
    Top</br>
    1                                                                  51</br>
      DSSDPSPS| |SSPSSSPSDDDDDDDDDS</br>
      PPPSSSS-| |--PP--SSP----P----</br>
    2                                                          52</br>
    Bottom</br>
</br>
</br>
Labled pinout:</br>
    Top:</br>
    1: WAKE#</br>
    3: Reserved (Wireless Coexistence Interface)</br>
    5: Reserved (Wireless Coexistence Interface)</br>
    7: CLKREQ#</br>
    9: GND</br>
    11: REFCLK-</br>
    13: REFCLK+</br>
    15: NC or GND</br>
    -</br>
    17: Reserved</br>
    19: Reserved</br>
    21: GND</br>
    23: PERn0</br>
    25: PERp0</br>
    27: GND</br>
    29: GND</br>
    31: PETn0</br>
    33: PETp0</br>
    35: GND</br>
    37: Reserved (Second PCIe lane. Tied to GND)</br>
    39: Reserved (Second PCIe lane. Tied to GND)</br>
    41: Reserved (Second PCIe lane. Tied to GND)</br>
    43: Reserved (Second PCIe lane. Tied to GND)</br>
    45: Reserved (Second PCIe lane. Tied to GND)</br>
    47: Reserved (Second PCIe lane. Tied to GND)</br>
    49: Reserved (Second PCIe lane. Tied to GND)</br>
    51: Reserved (W_DISABLE2#)</br>
</br>
</br>
    Bottom:</br>
    2: 3.3V</br>
    4: GND</br>
    6: 1.5V</br>
    8: VCC (SIM Card)</br>
    10: I/O (SIM Card)</br>
    12: CLK (SIM Card)</br>
    14: RST (SIM Card)</br>
    -</br>
    22: PERST#</br>
    24: +3.3Vaux</br>
    30: SMB_CLK</br>
    32: SMB_DATA</br>
    34: GND</br>
    44: LED_WLAN#</br>
</code>
|}
|}


Line 99: Line 186:
==  [[File:WiFi.png|20px]] WiFi ==
==  [[File:WiFi.png|20px]] WiFi ==


Module based on Marvell SD8787
Module based on Marvell SD8787.
Firmware in wlanbt_robin_img_ax.skprx starting at offset 305.

Latest revision as of 15:17, 6 December 2022


PSVITA PCH-1101 Wireless card
ZOE_MP wireless card with EMI shields
ZOE_MP measurement
ZOE_MP wireless card
Antenna Position (PCH-1100)
Antenna Position (PCH-2000)

Wireless card[edit | edit source]

ZOE_MP wireless card backside
Model Board Modem SDRAM Antenna Switch Module
PCH1101 ZOE_MP
backside		 [] Qualcomm MDM6200 [] Toshiba TY890A111222KA
 [] Sony CXM3555ER
--- --- --- --- ---
ZOE_MP wireless card frontside
Model Board Power Management Power Amplifier Module Power Amplifier Module Power Amplifier Module Power Amplifier Module Power Amplifier Module SAW Duplexer
PCH1101 ZOE_MP
front		 [] Qualcomm PM8028 [] Avago ACPM-7868
GSM850/900 bands
DCS1800/PCS1900 bands		 [] Avago ACPM-5001
UMTS band: 1
CDMA band: 6		 [] Avago ACPM-5008
UMTS band: 8		 [] Avago ACPM-5002
UMTS band: 2		 [] Avago ACPM-5005
UMTS band: 5
CDMA BC0		 [] Epcos 7964
--- --- --- --- --- --- --- --- ---

On motherboard backside, there are a Marvell 88W878S-BKB2 Avastar WLAN/Bluetooth/FM Single-Chip SoC.

Point Of Interest: On early manufactured Stock Keeping Units (mostly with release firmware such as 1.06) there is a known issue with faulty 3G sub boards. For more information on how to remedy check the errors page: C2-9693-7.


Gallery[edit | edit source]

  • ZOE_MP back (labelled as front by TECHINSIGHTS.com)

    ZOE_MP back (labelled as front by TECHINSIGHTS.com)

  • ZOE_MP front (labelled as back by TECHINSIGHTS.com)

    ZOE_MP front (labelled as back by TECHINSIGHTS.com)

  • Qualcomm PM8028 die mark

    Qualcomm PM8028 die mark

  • Qualcomm MDM6600 die mark (same mark as MDM6200)

    Qualcomm MDM6600 die mark (same mark as MDM6200)

Mobile Data Modem[edit | edit source]

Qualcomm Gobi is a family of embedded mobile broadband modem products by Qualcomm. One of the more notable products that contain a Gobi modem is the PSVita, which contains a MDM6200™ (note:the MDM6600 got closer specs than the MDM6270).

The communication of the Modem appears to be PCIe, instead of the more common (Used on WWAN modems for laptops.) USB interface. So, the Vita might have PCIe available for use along with USB. In case anyone wants to try putting a mPCIe SSD in it or even hook up an external GPU to the Vita.
Physical Pin Layout:
Top
1 51
--------| |------------------
--------| |------------------
2 52
Bottom


Used pins:
Legend:
* = Connected
- = Not Connected

Top
1 51
********| |******************
*******-| |--**--***----*----
2 52
Bottom


Labled pins (Section incomplete):
Legend:
S = Signal Pin
P = Vcc or GND pin
U = Signal pin pulled up to Vcc
D = Signal pin pulled down to GND
- = Not Connected

Top
1 51
DSSDPSPS| |SSPSSSPSDDDDDDDDDS
PPPSSSS-| |--PP--SSP----P----
2 52
Bottom


Labled pinout:
Top:
1: WAKE#
3: Reserved (Wireless Coexistence Interface)
5: Reserved (Wireless Coexistence Interface)
7: CLKREQ#
9: GND
11: REFCLK-
13: REFCLK+
15: NC or GND
-
17: Reserved
19: Reserved
21: GND
23: PERn0
25: PERp0
27: GND
29: GND
31: PETn0
33: PETp0
35: GND
37: Reserved (Second PCIe lane. Tied to GND)
39: Reserved (Second PCIe lane. Tied to GND)
41: Reserved (Second PCIe lane. Tied to GND)
43: Reserved (Second PCIe lane. Tied to GND)
45: Reserved (Second PCIe lane. Tied to GND)
47: Reserved (Second PCIe lane. Tied to GND)
49: Reserved (Second PCIe lane. Tied to GND)
51: Reserved (W_DISABLE2#)


Bottom:
2: 3.3V
4: GND
6: 1.5V
8: VCC (SIM Card)
10: I/O (SIM Card)
12: CLK (SIM Card)
14: RST (SIM Card)
-
22: PERST#
24: +3.3Vaux
30: SMB_CLK
32: SMB_DATA
34: GND
44: LED_WLAN#
Individual Chipsets IMT-2000 Modem Peak Data Rates Application Processor Voice GPS USB Wifi
MDM6200 3G HSPA+, GSM/GPRS/EDGE Up to 14Mbps No Yes gpsOneGen 8 with GLONASS USB 2.0 HS Peripheral or Host Supported with External Wifi

Related articles[edit | edit source]

  • Components (Parent Component is Half Mini PCIe Module)


Bluetooth.png Bluetooth[edit | edit source]

GPS[edit | edit source]

WiFi.png WiFi[edit | edit source]

Module based on Marvell SD8787. Firmware in wlanbt_robin_img_ax.skprx starting at offset 305.

Retrieved from "http://www.psdevwiki.com/vita/index.php?title=Wireless_communications&oldid=7533"