Pinout: Difference between revisions
Jump to navigation
Jump to search
(→Accessory Port: Merged with https://wiki.henkaku.xyz/vita/EHCI) |
|||
| Line 32: | Line 32: | ||
| 13 || I/O? | | 13 || I/O? | ||
|- | |- | ||
| 14 || GND | | 14 || GND | ||
|- | |- | ||
| 15 || I/O? | | 15 || I/O? | ||
|- | |- | ||
| 16 || GND | | 16 || GND | ||
|- | |- | ||
| 17 || +5V charge input | | 17 || +5V charge input | ||
Revision as of 21:36, 1 October 2017
Multi-use port
| Pin | Signal |
|---|---|
| 1 | another voltage input? |
| 2 | another voltage input? |
| 3 | GND |
| 4 | audio output |
| 5 | audio output |
| 6 | I/O? |
| 7 | I/O? |
| 8 | I/O? |
| 9 | I/O? |
| 10 | ? |
| 11 | headset control GND |
| 12 | headset control data / mic? |
| 13 | I/O? |
| 14 | GND |
| 15 | I/O? |
| 16 | GND |
| 17 | +5V charge input |
| 18 | +5V charge input |
| 19 | GND |
| 20 | USB D- |
| 21 | USB D+ |
Accessory Port
Accessory Port - mstrp1
Accessory Port - mstrp2
Accessory Port - mstrp3
Accessory Port - mstrp4
| Pin | Signal |
|---|---|
EHCI
The accessory port found only on the original Vita models is a custom port USB interface. The port must be activated in software and so far, there does not seem to be any official public software that uses it. As of firmware 1.69, all APIs that reference the accessory port are permanently disabled. The only documented usage of this port is from an FCC filing for the PDEL-1001 development unit. It seems that some dongle attached to the device is used as part of their hardware testing framework.