Psp Go Jigkick

From PSP Developer wiki
Jump to navigation Jump to search

How to enter Manufacturing Mode on Psp Go (Partial)

  • Pins 20, 21 and 24 connected together. 14 is tx (from psp to host) and 17 is rx (from host to psp)
  • Feed 5V to pin 22 (But it will work on battery power without it just fine)

Explanation

  • Pin 20 Makes it think it's on cradle with 5v psp adapter conected
  • Pin 21 Makes it detect a cable is on
  • Pin 24 tied to the other 2 enables serial