Iplloader: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
(cleanup) |
||
| Line 2: | Line 2: | ||
Devkit behavior: | Devkit behavior: | ||
On DTP-T1000 and DEM-1000 a different ROM and loading process are used, pre-ipl will be part of a kbooti/bootdispi/writei... file containing the encrypted pre-ipl data from 0x0 to 0x1000 followed by IPL blocks. | On DTP-T1000 and DEM-1000 a different ROM/hardware and loading process are used, pre-ipl will be part of a kbooti/bootdispi/writei... file containing the encrypted pre-ipl data from 0x0 to 0x1000 followed by IPL blocks. | ||
these files are loaded externally through the Communication Processor using the bloadp command to the Persistent Boot Storage (0xBFE00000), the | these files are loaded externally through the Communication Processor using the bloadp command to the Persistent Boot Storage (0xBFE00000), the hardware checks the pre-ipl data size (0x10-0x12) to know how much of the file it needs to check against the data hash (0x0-0x10), (anything over the size range is not checked/loaded), if the hash fails execution halts, it then decrypts the pre-ipl data itself and copies it to a memory mapped as 0xBFC00000 on the psp side and jumps to it, (the regular CPU rom is not mapped, it is capable of loading regular IPLs directly from NAND or Memory stick, on DTP-H1500/DTP-L1500 the normal behavior occurs and the IPL is loaded from NAND, the rom itself is identical on DTP-T1000 and DTP-H1500), 0xBFD00000 is an invalid address, trying to read from or write to it at IPL time will trigger a crash, this effectively renders the pre-ipl dynamic (updatable/downgradable) at will since it is not stored in rom format. The 1.00+ pre-ipls will copy it's pre-ipl payload (stored at 0xBFC000280) to 0x80010000 (physical address 0xa0010000) and jump there, because on DTP-T1000 0xbfc00000 is writable at pre-ipl time and because 0xBFD00000 is an invalid range on DTP-T1000, the payload will purposefully use the 0xBFC00000 memory (which originally contains the whole pre-ipl including bootcode) as work ram; it will however not wipe itself so you can dump the important part (the payload) from 0xa0010000 (assuming you gain execution at IPL time), until 2.60 the payload will just overwrite 0xbfc00000 using random data but since 2.60 the payload will instead overwrite everything after 0xbfc002c0 with 00s because some of the data stored between 0xbfc00000 and 0xbfc002c0 is used as an additional step by 2.60+ IPLs to decrypt main.bin, this also means that on a DTP-T1000 this data is retrievable if dumped early, in fact most of it remains retrievable well after boot on 1.50 if bootstrapped using the 2.60 or 2.71 pre-ipl data. | ||
It is also of worthy of note that prototype pre-ipl for DEM-1000 (for 0.40 and 0.60 firmwares) do not make use of 0xa0010000 as it's payload location, the payload is instead executed in place at 0xbfc00000, as such the pre-ipl data is not wiped and can be dumped in its entirety using a custom IPL (please note that the IPL format is different than later revision IPLs, prototype IPLs are loaded in a single raw kirk cmd0 0x01 block) | It is also of worthy of note that prototype pre-ipl for DEM-1000 (for 0.40 and 0.60 firmwares) do not make use of 0xa0010000 as it's payload location, the payload is instead executed in place at 0xbfc00000, as such the pre-ipl data is not wiped and can be dumped in its entirety using a custom IPL (please note that the IPL format is different than later revision IPLs, prototype IPLs are loaded in a single raw kirk cmd0 0x01 block) | ||
IPL blocks are then loaded from 0xBFE01000 by the pre-ipl and copied accordingly to the load address specified in the metadata (IPL blocks have no metadata in prototype IPLs instead the pre-ipl uses 0x88400000 as an hardcoded entry point, in fact the IPL payload/part3, nested inside current IPL revisions and loaded by main.bin are using the prototype format, so the prototype pre-ipl loads the IPL part 3/payload directly). | IPL blocks are then loaded from 0xBFE01000 by the pre-ipl and copied accordingly to the load address specified in the metadata (IPL blocks have no metadata in prototype IPLs instead the pre-ipl uses 0x88400000 as an hardcoded entry point, in fact the IPL payload/part3, nested inside current IPL revisions and loaded by main.bin are using the prototype format, so the prototype pre-ipl loads the IPL part 3/payload directly). | ||
Revision as of 16:21, 14 March 2018
The PRE-IPL on retail PSP units is the Tachyon (Allegrex MIPS R4000 based SOC) bootrom. It is mapped to 0xBFC00000 which is the reset vector of PSP's MIPS R4000 CPU
Devkit behavior: On DTP-T1000 and DEM-1000 a different ROM/hardware and loading process are used, pre-ipl will be part of a kbooti/bootdispi/writei... file containing the encrypted pre-ipl data from 0x0 to 0x1000 followed by IPL blocks. these files are loaded externally through the Communication Processor using the bloadp command to the Persistent Boot Storage (0xBFE00000), the hardware checks the pre-ipl data size (0x10-0x12) to know how much of the file it needs to check against the data hash (0x0-0x10), (anything over the size range is not checked/loaded), if the hash fails execution halts, it then decrypts the pre-ipl data itself and copies it to a memory mapped as 0xBFC00000 on the psp side and jumps to it, (the regular CPU rom is not mapped, it is capable of loading regular IPLs directly from NAND or Memory stick, on DTP-H1500/DTP-L1500 the normal behavior occurs and the IPL is loaded from NAND, the rom itself is identical on DTP-T1000 and DTP-H1500), 0xBFD00000 is an invalid address, trying to read from or write to it at IPL time will trigger a crash, this effectively renders the pre-ipl dynamic (updatable/downgradable) at will since it is not stored in rom format. The 1.00+ pre-ipls will copy it's pre-ipl payload (stored at 0xBFC000280) to 0x80010000 (physical address 0xa0010000) and jump there, because on DTP-T1000 0xbfc00000 is writable at pre-ipl time and because 0xBFD00000 is an invalid range on DTP-T1000, the payload will purposefully use the 0xBFC00000 memory (which originally contains the whole pre-ipl including bootcode) as work ram; it will however not wipe itself so you can dump the important part (the payload) from 0xa0010000 (assuming you gain execution at IPL time), until 2.60 the payload will just overwrite 0xbfc00000 using random data but since 2.60 the payload will instead overwrite everything after 0xbfc002c0 with 00s because some of the data stored between 0xbfc00000 and 0xbfc002c0 is used as an additional step by 2.60+ IPLs to decrypt main.bin, this also means that on a DTP-T1000 this data is retrievable if dumped early, in fact most of it remains retrievable well after boot on 1.50 if bootstrapped using the 2.60 or 2.71 pre-ipl data. It is also of worthy of note that prototype pre-ipl for DEM-1000 (for 0.40 and 0.60 firmwares) do not make use of 0xa0010000 as it's payload location, the payload is instead executed in place at 0xbfc00000, as such the pre-ipl data is not wiped and can be dumped in its entirety using a custom IPL (please note that the IPL format is different than later revision IPLs, prototype IPLs are loaded in a single raw kirk cmd0 0x01 block) IPL blocks are then loaded from 0xBFE01000 by the pre-ipl and copied accordingly to the load address specified in the metadata (IPL blocks have no metadata in prototype IPLs instead the pre-ipl uses 0x88400000 as an hardcoded entry point, in fact the IPL payload/part3, nested inside current IPL revisions and loaded by main.bin are using the prototype format, so the prototype pre-ipl loads the IPL part 3/payload directly).
Please note that the 0xa0010000 memory does not survive reboots.
Retail behavior (pseucode from TA-079 pre-ipl payload):
int iplBlockNumber = 0;
u32 checksum = 0;
// load/decrypt all encrypted ipl blocks
while(1)
{
// copy an encrypted ipl block to 0xBFD00000-0xBFD01000 (4KB embedded cpu ram)
if (LoadIplBlock(iplBlockNum ber, block) < 0)
while(1);
// decrypt the ipl block in place (uh oh...)
if (DecryptIplBlock(block, block))
while(1);
// first block will have zero as its checksum since there is no previous block (another uh oh...)
if (block->checksum != checksum)
while(1);
// load the 'data' section of the ipl block to the specified address (0x040Fxxxx range)
if (block->loadaddr)
checksum = memcpy(block->loadaddr, block->data, block->blocksize);
// reached the end of the ipl, jump to the entry address (0x040F0000)
if (block->entry)
{
// clear caches
Dcache();
Icache();
// jump to ipl - do not return
block->entry();
}
iplBlockNumber++;
}
TA-079 pre-ipl pseudo code:
PSP Disassembler Ver.0.20 Copyright(c)2005,2006 BOOSTER
incl. elf-lib 0.1r2 copyright (c) 2005 djhuevo
:file name '0x80010000.bin',size = 4096
Load 3684 NID's name
:Disasm
;copied by pre-ipl bootcode, from 0xbfc00280-0xbfc00d78
;here code is 0x80010000 to 0x80010af8
;
;$bfd00000-$bfd00fff : sector read buffer
;
;-------------------------------------------------------
;recovery mode selector
;be240004 GPIO READ REG.
; bit4 : device select ,0=NAND Flash, 1= rec-dev
;
;-------------------------------------------------------
;-------------------------------------------------------
;recovery boot device (rec-dev) HW assign
;
;bd200030 command register
00009007 : read request (write size = 8)
00002200 : read sector buffer (read size=200)
00008004 : ? status (write size = 8 , read size=8)
00004000 : ? status (read size=8)
00007001 : ? (data size=8?)
;bd200034 data register (read / write)
;bd200038 status register
; bit14:read data ready
; bit13:parameter wirte ready
; bit12:transmit finish ?
; bit 9:???? error
; bit 8:read data error
;
;bd20003c ???
bit15:reset device ?
;
;-------------------------------------------------------
;---------------------------------------------------------------------------
;entry
;---------------------------------------------------------------------------
L80010000:
;
;reset I/O
$800106B0(L80010a80)
;
lui r8,$bc10 ;80010010[3C08BC10,'...<']
;
if(r8[$68]>>16 == 0) $80010034
;
r9 = r8[$78]
ori r9,r9,$0800 ;80010028[35290800,'..)5']
b $80010040 ;8001002C[10000004,'....']
sw r9,$78(r8) ;80010030[AD090078,'x...']
;
;80010034
lw r9,$7c(r8) ;80010034[8D09007C,'|...']
ori r9,r9,$0010 ;80010038[35290010,'..)5']
sw r9,$7c(r8) ;8001003C[AD09007C,'|...']
addiu r4,0,$a ;80010040[2404000A,'...$']
jal $80010768 ;80010044[0C0041DA,'.A..']
sync ;80010048[0000000F,'....']
;80010768
;
;check recovery boot mode switch
;
r8 = [$be240004] & 0x10 // GPIO bit 4
;
r9 = $80010194 // NAND read BLOCK entry
r10= $80010130 // NAND initialize(read FAT) entry
;
if(r8!=0)// $80010080
{
r9 = $80010248 // rec-dev read BLOCK entry
r10= $80010240 // rec-dev initialize entry
}
;80010080
[$80010808] = r9
[$8001080c] = 0x000000000
;
;call read FAT
;
(r10)()
;
r23 = 0 ; check sum of last block
;
;READ BLOCK LOOP
;
L80010098
r25 = [$80010808] ; read BLOCK entry
r4 = [$8001080c] ; block num of read
;
;call read body function
;
r2 = (r25)(r4,$bfd000000);
if(r2<0) $80010128
;
;decrypt 1000H block
;
r2 = $80010620($bfd00000,$bfd00000)
if(r2<0) $80010128
;
;+000c : check sum of last block ?
;
if( [$bfd0000c] != r23) $80010128
;
;+0000 : distination address
;+0004 : block size
;
r4 = [$bfd00000] ; +0000 : top pointer
r6 = [$bfd00004] ; +0004 : size
if(r4!=0)
{
;transmit BLOCK body
r23 = $80010688(r4,r16 + $10 , r6)
}
;
;+0008 : entry point or continue MARK check
;
r25 = r16[8]
if(r25==0) //$80010114
{
;L80010114:
[$8001080c]++ ; next block
goto $80010098
}
;
;cache ?
$800102D8()
;
;cache ?
$800102A0()
;
;goto IPL entry point
;
jalr r25 ;8001010C[0320F809,'.. .']
;
;80010128
while(1); // HALT
;
;---------------------------------------------------------------------------
;read IPL FAT
;---------------------------------------------------------------------------
L80010130:
r16 =r31
;
;80010134
;NAND reset
$80010308()
;
;8001013C
r17 = $80 // top of IPL-FAT sector
;80010140
;read IPL FAT
r2 = $80010334(r17,8001081c,80010810)
if(r2<0) $8001018c
;80010164
r8 = r6[0]
r9 = r6[4]
r10= r6[8]
;ECC signature
if(r9 != $6dc64a38) // $8001018c
{
r17 += $20 // next IPL sector
goto $80010140
}
; jr r16 ;80010184[02000008,'....']
return
;------------------------------------------------------------------------
;NAND read body
;
;r4 : fat logical ptr (400H bytes lba? )
;
;------------------------------------------------------------------------
L80010194:
[$80010800] = r31
[$80010804] = r4
;
r17 = r5
;get FAT location
r8 = $8001081c ; FAT table
r9 = (r4>>2)<<1
r8 += r9
r9 = (u16)r8[0]
;
r8 = (r9<<2) | (r4 & 3)
;
r16 = r8 << 3 ; * 8
r18 = 0
;800101CC
do
{
;read body one
r2 = $80010334(r16+r18,r17 + (r18<<9),80010810)
if(r2<0) $80010230
r8 = r6[0]
r9 = r6[4]
r10= r6[8]
;ECC signature
if(r9 != $6dc64a38) $80010230
r18++
}while(r18<8);
;80010220
r31 = [$80010800]
return r0
L80010230:
r31 = [$80010800]
return -1
;------------------------------------------------------------------------
;rec-dev initialize
;------------------------------------------------------------------------
L80010240:
return $800103B4()
;------------------------------------------------------------------------
;rec-dev read 1000H block
;------------------------------------------------------------------------
L80010248:
[$80010$800] = r31
;
r16 = r4
r17 = r5
r18 = 0
;8001025C
do{
r2 = $80010418(r18+0x10+r16<<3 ,r17 + r18<<9)
if(r2<0) $8001025c
r18++
}while(r18<8);
;
r31 = [$80010$800]
return r2
;------------------------------------------------------------------------
;cache ?
;------------------------------------------------------------------------
L800102A0:
mfc0 r8,Config ;800102A0[40088000,'...@']
addiu r9,0,$1000 ;800102A4[24091000,'...$']
dc.l $7d081240 [invalid] ;800102A8[7D081240,'@..}']
sllv r9,r9,r8 ;800102AC[01094804,'.H..']
mtc0 0,TagLo ;800102B0[4080E000,'...@']
mtc0 0,TagHi ;800102B4[4080E800,'...@']
addu r8,0,0 ;800102B8[00004021,'!@..']
;
cache $01,r8($0) ;800102BC[BD010000,'....']
cache $03,r8($0) ;800102C0[BD030000,'....']
addiu r8,r8,$40 ;800102C4[25080040,'@..%']
bne r8,r9,$800102bc ;800102C8[1509FFFC,'....']
nop ;800102CC[00000000,'....']
jr r31 ;800102D0[03E00008,'....']
nop ;800102D4[00000000,'....']
;------------------------------------------------------------------------
;cache ?
;------------------------------------------------------------------------
L800102D8:
mfc0 r8,Config ;800102D8[40088000,'...@']
addiu r9,0,$800 ;800102DC[24090800,'...$']
dc.l $7d081180 [invalid] ;800102E0[7D081180,'...}']
sllv r9,r9,r8 ;800102E4[01094804,'.H..']
addu r8,0,0 ;800102E8[00004021,'!@..']
;
cache $14,r8($0) ;800102EC[BD140000,'....']
cache $14,r8($0) ;800102F0[BD140000,'....']
addiu r8,r8,$40 ;800102F4[25080040,'@..%']
bne r8,r9,$800102ec ;800102F8[1509FFFC,'....']
nop ;800102FC[00000000,'....']
jr r31 ;80010300[03E00008,'....']
sync ;80010304[0000000F,'....']
;----------------------------------------------------------------------------
;NAND reset CMD
;----------------------------------------------------------------------------
L80010308:
;nand cmd
[$bd101008] = 0xff
;nand sts
while( [$bd101004] & 1 ==0);
;
[$bd101014] = 0x01
return
;----------------------------------------------------------------------------
;NAND Read Sector
;
;r4 : sector
;r5 : data buffer
;r6 : Extra buffer
;
;----------------------------------------------------------------------------
L80010334:
;nand sts
while([$bd101004] & 1 == 0);
;
[$bd101020] = r4 << 10
[$bd101024] = $301
;80010354
while([$bd101024] & 1 == 0);
;80010364
if([$bd101028] != 0) return -1
;
lui r8,$bff0 ;80010370[3C08BFF0,'...<']
;
r9 = r8[$900]
r10 = r8[$904]
r2 = r8[$908]
;
r6[0] = r9
r6[4] = r10
r6[8] = r2
;
r9 = r5
r2 = $200
L80010394:
do
{
r10 = r8[0]
r2 -= 4
r8 += 4
r9[0] = r10
r9 += 4
}while(r2);
;800103AC
return 0
;----------------------------------------------------------------------------
;rec-dev initialize
;----------------------------------------------------------------------------
L800103B4:
r24 = r31
;
;rec-dev I/O init : device & clock enable ?
$800106B0(L80010ad4)
;
;reset device ?
;
[$bd20003c] = $8000
;800103D4
while( [$bd20003c] & 0x8000);
;
$80010530()
$80010508()
;
;800103F4
do{
r2 = $800105B8()
if(r2<0) continue // $800103f4
;
}while(r2 & $0080 == 0); // $800103f4
;
; jr r24 ;80010410[03000008,'....']
return 0
;----------------------------------------------------------------------------
;rec-dev read sector one
;
;a1:sector address
;a2:buffer
;
;----------------------------------------------------------------------------
L80010418:
r14 = r5
; r24 = r31
; lui r25,$bd20
;
;read sector COMMAND ?
[$bd200030] = $00009007
;
dc.l $7c0428e0 [invalid] ;8001042C[7C0428E0,'.(.|']
;
r5 >>= 8
r9 = (r4 >> 24) << 24
;
r4 = $00010020
r4 |= r9
;
;write parameter
r2 = $800104C0(r4,r5)
if(r2<0) return -1
;busy wait
$80010608()
;
;$8001045c
do{
r2 = $800105B8()
if(r2<0) return -1
r2 = r2 & $0020
}while((r2 & $0020)==0);
;
if(r2 & $0040) return -1
;
;read buffer COMMAND ?
[$bd200030] = $00002200
;
;read sector data
r2 = $800104CC(r14,$200) // r14 == r5
if(r2<0) return -1
;wait finish
r2 = $80010508()
if(r2<0) return -1
;busy wait
$80010608()
;
goto $800103f4
;
;800104B8
; jr r24 ;800104B8[03000008,'....']
return -1
;----------------------------------------------------------------------------
;rec-dev : commmand output ?
;
;a1:1st write data
;a2:2nd write data
;----------------------------------------------------------------------------
L800104C0:
[$bd200034] = r4
[$bd200034] = r5
goto $80010508
;----------------------------------------------------------------------------
;rec-dev read data block
;
;a1:distination pointer
;a2:transmit size
;
;----------------------------------------------------------------------------
L800104CC:
do{
do{
r9 = [$bd200038]
if(r9 & $0100) return -1;
}while(r9 & $4000 == 0);
;
r2 = [$bd200034]
r5 -= 4
r4[0] = r2
r4 += 4
}while(r5 >=0);
;
return 0;
;----------------------------------------------------------------------------
;wait for TX finish ?
;----------------------------------------------------------------------------
L80010508:
do{
r9 = [$bd200038]
}while(r9 & $1000 == 0);
;
if(r9 & $0300) return -1// $80010528
;
return 0
;----------------------------------------------------------------------------
;rec-dev read status ?
;----------------------------------------------------------------------------
L80010530:
; addu r15,r31,0 ;80010530[03E07821,'!x..']
; lui r25,$bd20 ;80010534[3C19BD20,' ..<']
;
[$bd200030] = $00008004
[$bd200034] = $06100800
[$bd200034] = 0
r2 = $80010508()
if(r2<0) return -1
;
$800105A4($80010a1c,8);
;
;get status ?
;
r4 = [$80010a1c]
r5 = [$80010a20]
;
if( (r4>>16)&0x15 != 0) return -1
;
return 0
;----------------------------------------------------------------------------
;rec-dev read status ?
;
;a1:buffer
;a2:size
;
;----------------------------------------------------------------------------
L800105A4:
[$bd200030] = $00004000
;read sector body
return $800104cc(r4,r5)
;-----------------------------------------------------------------------------
;rec-dev device ready check?
;-----------------------------------------------------------------------------
L800105B8:
;r25 = $bd200000
[$bd200030] = $00007001
;wait
do
{
r9 = [$bd200038]
}while(r9 & $0100);
if((r9 & $4000)==0) $800105c0
;
r2 = [$bd200034]
r0 = [$bd200034] // ?
;800105E0
do{
r9 = [$bd200038]
if(r9 & $0100) //$80010600
{
L80010600:
return -1
}
}while( (r9 & $1000)==0);
;
return r2 & 0xff;
;----------------------------------------------------------------------------
;wait for rec-dev busy
;----------------------------------------------------------------------------
L80010608:
do
{
r9 = [$bd200038]
}while( (r9 & $2000) == 0);
return
;-----------------------------------------------------------------------------
;decrypt 1000H block
;-----------------------------------------------------------------------------
L80010620:
; lui r25,$bde0 ;80010620[3C19BDE0,'...<']
;
[$bde00010] = $00000001
;r8 = r4
dc.l $7ca8e000 [invalid] ;8001062C[7CA8E000,'...|']
[$bde0002c] = r8
;
;r8 = r5
dc.l $7c88e000 [invalid] ;80010634[7C88E000,'...|']
[$bde00030] = r8
;
[$bde0000c] = $00000001
;$80010644
do{
r8 = [$bde0001c]
}while(r8 & $0011 == 0)
;
[$bde00028] = r8
if(r8&$0010) // $80010664
{
L80010664:
[$bde0000c] = $00000002
;$8001066C
do{
r8 = [$bde0001c]
}while(r8 & $0002 == 0)
;
[$bde00028] = r8
sync
return -1
}
;
return [$bde00014]
;----------------------------------------------------------------------------
;transmit data with calc check sum
;
;arg1: source
;arg2: distination
;arg1: size
;
;return : 32bit check sum (add)
;
;----------------------------------------------------------------------------
L80010688:
r2 = 0 ; clear check sum
do{
r3 = r5[0]
r5 += 4
r6 -= 4
r4[0] = r3
r2 += r3 ; check sum
r4 += 4
}while(r6>=0);
return
;---------------------------------------------------------------------------
;script executer
;
;a1:script pointer
;
;2 word command
;
;+00[31:28] : CMD
;+00[27: 0] : OFFSET
;+04[31: 0] : VALUE
;
;CMD : command :
; 0 : store | [$b0000000 + OFFSET] = VALUE
; 1 : or | [$b0000000 + OFFSET] |= VALUE
; 2 : and | [$b0000000 + OFFSET] &= VALUE
; 3 : wait toL| while( ( [$b0000000 + OFFSET] &= VALUE) != 0)
;(4) : wait toH| while( (~[$b0000000 + OFFSET] &= VALUE) != 0)
; 5 : delay | for(cnt=VALUE*96;cnt;cnt--)
; F : end | return
;
;---------------------------------------------------------------------------
L800106B0:
r8 = r4
;addu r25,r31,0
;
;800106b8
do{
// read CMD:offset + VALUE
r4 = r8[0]
r9 = r4 >> 28
r4 = ( (r4 << 4)>>4 ) | $b0000000
r5 = r4[4]
;
if(r9==0) //$80010724
{
;80010724
r4[0]=r5
goto $8001071c
}
if(r9==1)// $8001072c
{
;8001072C
r4[0] = r4[0] | r5
goto $8001071c
}
if(r9==2) // $8001073c
{
r4[0] = r4[0] & r5
goto $8001071c
}
r1 = 0
if(r9==3) $8001074c
;
r1 = $ffffffff ; nor r1,0,0
;!!!!! buggy code !!!!!
; addiu r10,r10,-$4
; if(r9==4) $8001074c
if(r9==7) $8001074c
;!!!!! buggy code !!!!!
; if(r9==5) //$80010714
{
L80010714:
$80010768(r5);
goto L8001071C
}
;default:
; jr r25 ;8001070C[03200008,'.. .']
return;
;
;case end
L8001071C:
// next script point
r8 += 8
}while(1);
;
;4,7
L8001074C:
{
do{
r9 = (r4[0] ^ r1) & r5
}while(r9!=0);
goto $8001071c
}
;--------------------------------------------------------------------------
;delay
;--------------------------------------------------------------------------
L80010768:
r1 = ((r4 << 1) + r4)<<5 // * 96
while(r1) r1--;
return
;--------------------------------------------------------------------------
;--------------------------------------------------------------------------
L80010784:
nop ;80010784[00000000,'....']
nop ;80010788[00000000,'....']
nop ;8001078C[00000000,'....']
nop ;80010790[00000000,'....']
nop ;80010794[00000000,'....']
nop ;80010798[00000000,'....']
nop ;8001079C[00000000,'....']
nop ;800107A0[00000000,'....']
nop ;800107A4[00000000,'....']
nop ;800107A8[00000000,'....']
nop ;800107AC[00000000,'....']
nop ;800107B0[00000000,'....']
nop ;800107B4[00000000,'....']
nop ;800107B8[00000000,'....']
nop ;800107BC[00000000,'....']
nop ;800107C0[00000000,'....']
nop ;800107C4[00000000,'....']
nop ;800107C8[00000000,'....']
nop ;800107CC[00000000,'....']
nop ;800107D0[00000000,'....']
nop ;800107D4[00000000,'....']
nop ;800107D8[00000000,'....']
nop ;800107DC[00000000,'....']
nop ;800107E0[00000000,'....']
nop ;800107E4[00000000,'....']
nop ;800107E8[00000000,'....']
nop ;800107EC[00000000,'....']
nop ;800107F0[00000000,'....']
nop ;800107F4[00000000,'....']
nop ;800107F8[00000000,'....']
nop ;800107FC[00000000,'....']
;-----------------------------------------------------------------------------
;
;r31 save buffer
;
L80010800:
dl 800100B0
;
;r4 save buffer
;
L80010804:
dl 0000002E
;
;read sector function entry
;
L80010808:
dl L80010194
;
;read block number
;
L8001080C:
dl L0000002E
;
;NAND Extra buffer
;
L80010810:
dl FFFFFFFF
dl 6DC64A38
dl FFFFFD89
;
;NAND Data buffer (IPL FAT)
;
L8001081c
mfhi 0 ;8001081C[00110010,'....']
mflo 0 ;80010820[00130012,'....']
dsllv 0,r21,0 ;80010824[00150014,'....']
dsrlv 0,r23,0 ;80010828[00170016,'....']
mult 0,r25 ;8001082C[00190018,'....']
div 0,r27 ;80010830[001B001A,'....']
nop ;80010834[00000000,'....']
nop ;80010838[00000000,'....']
nop ;8001083C[00000000,'....']
nop ;80010840[00000000,'....']
nop ;80010844[00000000,'....']
nop ;80010848[00000000,'....']
nop ;8001084C[00000000,'....']
nop ;80010850[00000000,'....']
nop ;80010854[00000000,'....']
nop ;80010858[00000000,'....']
nop ;8001085C[00000000,'....']
nop ;80010860[00000000,'....']
nop ;80010864[00000000,'....']
nop ;80010868[00000000,'....']
nop ;8001086C[00000000,'....']
nop ;80010870[00000000,'....']
nop ;80010874[00000000,'....']
nop ;80010878[00000000,'....']
nop ;8001087C[00000000,'....']
nop ;80010880[00000000,'....']
nop ;80010884[00000000,'....']
nop ;80010888[00000000,'....']
nop ;8001088C[00000000,'....']
nop ;80010890[00000000,'....']
nop ;80010894[00000000,'....']
nop ;80010898[00000000,'....']
nop ;8001089C[00000000,'....']
nop ;800108A0[00000000,'....']
nop ;800108A4[00000000,'....']
nop ;800108A8[00000000,'....']
nop ;800108AC[00000000,'....']
nop ;800108B0[00000000,'....']
nop ;800108B4[00000000,'....']
nop ;800108B8[00000000,'....']
nop ;800108BC[00000000,'....']
nop ;800108C0[00000000,'....']
nop ;800108C4[00000000,'....']
nop ;800108C8[00000000,'....']
nop ;800108CC[00000000,'....']
nop ;800108D0[00000000,'....']
nop ;800108D4[00000000,'....']
nop ;800108D8[00000000,'....']
nop ;800108DC[00000000,'....']
nop ;800108E0[00000000,'....']
nop ;800108E4[00000000,'....']
nop ;800108E8[00000000,'....']
nop ;800108EC[00000000,'....']
nop ;800108F0[00000000,'....']
nop ;800108F4[00000000,'....']
nop ;800108F8[00000000,'....']
nop ;800108FC[00000000,'....']
nop ;80010900[00000000,'....']
nop ;80010904[00000000,'....']
nop ;80010908[00000000,'....']
nop ;8001090C[00000000,'....']
nop ;80010910[00000000,'....']
nop ;80010914[00000000,'....']
nop ;80010918[00000000,'....']
nop ;8001091C[00000000,'....']
nop ;80010920[00000000,'....']
nop ;80010924[00000000,'....']
nop ;80010928[00000000,'....']
nop ;8001092C[00000000,'....']
nop ;80010930[00000000,'....']
nop ;80010934[00000000,'....']
nop ;80010938[00000000,'....']
nop ;8001093C[00000000,'....']
nop ;80010940[00000000,'....']
nop ;80010944[00000000,'....']
nop ;80010948[00000000,'....']
nop ;8001094C[00000000,'....']
nop ;80010950[00000000,'....']
nop ;80010954[00000000,'....']
nop ;80010958[00000000,'....']
nop ;8001095C[00000000,'....']
nop ;80010960[00000000,'....']
nop ;80010964[00000000,'....']
nop ;80010968[00000000,'....']
nop ;8001096C[00000000,'....']
nop ;80010970[00000000,'....']
nop ;80010974[00000000,'....']
nop ;80010978[00000000,'....']
nop ;8001097C[00000000,'....']
nop ;80010980[00000000,'....']
nop ;80010984[00000000,'....']
nop ;80010988[00000000,'....']
nop ;8001098C[00000000,'....']
nop ;80010990[00000000,'....']
nop ;80010994[00000000,'....']
nop ;80010998[00000000,'....']
nop ;8001099C[00000000,'....']
nop ;800109A0[00000000,'....']
nop ;800109A4[00000000,'....']
nop ;800109A8[00000000,'....']
nop ;800109AC[00000000,'....']
nop ;800109B0[00000000,'....']
nop ;800109B4[00000000,'....']
nop ;800109B8[00000000,'....']
nop ;800109BC[00000000,'....']
nop ;800109C0[00000000,'....']
nop ;800109C4[00000000,'....']
nop ;800109C8[00000000,'....']
nop ;800109CC[00000000,'....']
nop ;800109D0[00000000,'....']
nop ;800109D4[00000000,'....']
nop ;800109D8[00000000,'....']
nop ;800109DC[00000000,'....']
nop ;800109E0[00000000,'....']
nop ;800109E4[00000000,'....']
nop ;800109E8[00000000,'....']
nop ;800109EC[00000000,'....']
nop ;800109F0[00000000,'....']
nop ;800109F4[00000000,'....']
nop ;800109F8[00000000,'....']
nop ;800109FC[00000000,'....']
nop ;80010A00[00000000,'....']
nop ;80010A04[00000000,'....']
nop ;80010A08[00000000,'....']
nop ;80010A0C[00000000,'....']
nop ;80010A10[00000000,'....']
nop ;80010A14[00000000,'....']
nop ;80010A18[00000000,'....']
;
;rec-dev status read buffer ?
L80010A1C:
dl 00000000,00000000
;
nop ;80010A24[00000000,'....']
nop ;80010A28[00000000,'....']
nop ;80010A2C[00000000,'....']
nop ;80010A30[00000000,'....']
nop ;80010A34[00000000,'....']
nop ;80010A38[00000000,'....']
nop ;80010A3C[00000000,'....']
nop ;80010A40[00000000,'....']
nop ;80010A44[00000000,'....']
nop ;80010A48[00000000,'....']
nop ;80010A4C[00000000,'....']
nop ;80010A50[00000000,'....']
nop ;80010A54[00000000,'....']
nop ;80010A58[00000000,'....']
nop ;80010A5C[00000000,'....']
nop ;80010A60[00000000,'....']
nop ;80010A64[00000000,'....']
nop ;80010A68[00000000,'....']
nop ;80010A6C[00000000,'....']
nop ;80010A70[00000000,'....']
nop ;80010A74[00000000,'....']
nop ;80010A78[00000000,'....']
nop ;80010A7C[00000000,'....']
;
;
;script command : I/O init
;
L80010A80:
dl 1C100058,00800000 ; [$bc100058] |= 00800000
dl 1C100050,0000608E ; [$bc100050] |= 0000608E
dl 2C10004C,FFFFFBF7 ; [$bc10004C] &= FFFFFBF7
dl 1C100078,00000002 ; [$bc100078] |= 00000002
dl 2E240000,FFFFFFEF ; [$be240000] &= FFFFFFEF : GPIO bit4 direction read?
dl 1E240040,00000010 ; [$be240040] |= 00000010 : GPIO bit4 pullup enable ?
dl 50000000,00000001 ; delay 1
dl 0D500010,00000001 ; [$bd500010] = 00000001
dl 3D500010,00000001 ; while( [$bd500010] & 1)
dl 0D500040,00000001 ; [$bd500040] = 00000001
dl F0000000 ; end
;
;script command : rec-dev I/O init
;
L80010AD4:
dl 3D500010,00000001 ; while( [$bd500010] & 1)
dl 1C100054,00000100 ; [$bc100054] |= 00000100
dl 1C100050,00000400 ; [$bc100050] |= 00000400
dl 1C100078,00000010 ; [$bc100078] |= 00000010
dl 2C10004C,FFFFFEFF ; [$bc10004C] &= FFFFFEFF
dl F0000000 ; end
;
;------------------------------------------------------------------------------
;code end
;------------------------------------------------------------------------------