Button Combos: Difference between revisions
Jump to navigation
Jump to search
m (→More System Information: Pressing Left Dpad and Start, instead of just pressing Start, causes it to remain on the screen (this can be reliably reproduced)) |
(Added "Reset System Settings", general cleanup, re-worded instructions to be more clear) |
||
| Line 1: | Line 1: | ||
= | == PSP-E1000 Factory Service Mode == | ||
* Your PSP must be fully powered off (not in sleep mode) | |||
* Plug in your [[PSP Street Jigkick]] USB mini-B and have the Baryon Sweeper software running | |||
* Hold down LTrigger + RTrigger + LeftDpad + Circle and turn on the PSP, keep buttons held until the PSP boots into service mode | |||
== Reset System Settings == | |||
* Your PSP must be fully powered off (not in sleep mode) | |||
* Hold Triangle + Square + Select + Start and turn on the PSP, keep held until the boot animation appears | |||
* | == More System Information == | ||
* Hold down LTrigger+RTrigger+Left Dpad+Square for a couple seconds (3) then let go and | * Navigate to Settings > System Settings > System Information | ||
* | * Hold down LTrigger + RTrigger + Left Dpad + Square for a couple seconds (3) then let go and hold Start to display extra system information | ||
* To have it remain on screen until you exit System Information, press Left Dpad while holding Start, then release both | |||
Revision as of 07:18, 30 November 2023
PSP-E1000 Factory Service Mode
- Your PSP must be fully powered off (not in sleep mode)
- Plug in your PSP Street Jigkick USB mini-B and have the Baryon Sweeper software running
- Hold down LTrigger + RTrigger + LeftDpad + Circle and turn on the PSP, keep buttons held until the PSP boots into service mode
Reset System Settings
- Your PSP must be fully powered off (not in sleep mode)
- Hold Triangle + Square + Select + Start and turn on the PSP, keep held until the boot animation appears
More System Information
- Navigate to Settings > System Settings > System Information
- Hold down LTrigger + RTrigger + Left Dpad + Square for a couple seconds (3) then let go and hold Start to display extra system information
- To have it remain on screen until you exit System Information, press Left Dpad while holding Start, then release both