PSP Street Jigkick: Difference between revisions
Jump to navigation
Jump to search
(Added text instructions) |
|||
| Line 1: | Line 1: | ||
= How to Enter Service Mode (officially known as Manufacturing Mode) on PSP Street = | |||
Connecting a PSP Street to a TTL serial adapter: | |||
* The ID pin on the Street's mini-B USB port is used for k-line serial communication | |||
* Serial adapter must have a 1n4148 diode with line (cathode) toward it's TX, other end (anode) tied to RX, and RX going to Street USB ID pin | |||
* Ground connected between Street USB and serial adapter | |||
* (optional) Plug a +5v charger into the DC In port of the PSP Street | |||
Plug in your serial adapter to PC and set up [[https://github.com/khubik2/pysweeper PySweeper]] with the correct COM port for your adapter and the option for service mode selected. Plug in mini-B USB with only ID and ground connected to serial adapter into PSP Street while fully powered off (NOT in sleep mode), hold LTrigger + RTrigger + LeftDpad + Circle while powering on, SYSCON will begin serial communication with your serial adapter and enter service mode. | |||
= Picture of Setup = | = Picture of Setup = | ||
Revision as of 17:56, 25 August 2023
How to Enter Service Mode (officially known as Manufacturing Mode) on PSP Street
Connecting a PSP Street to a TTL serial adapter:
- The ID pin on the Street's mini-B USB port is used for k-line serial communication
- Serial adapter must have a 1n4148 diode with line (cathode) toward it's TX, other end (anode) tied to RX, and RX going to Street USB ID pin
- Ground connected between Street USB and serial adapter
- (optional) Plug a +5v charger into the DC In port of the PSP Street
Plug in your serial adapter to PC and set up [PySweeper] with the correct COM port for your adapter and the option for service mode selected. Plug in mini-B USB with only ID and ground connected to serial adapter into PSP Street while fully powered off (NOT in sleep mode), hold LTrigger + RTrigger + LeftDpad + Circle while powering on, SYSCON will begin serial communication with your serial adapter and enter service mode.
