Button Combos: Difference between revisions

From PSP Developer wiki
Jump to navigation Jump to search
Line 3: Line 3:
* Plug in your [[PSP Street Jigkick]] mini-B USB and have the Baryon Sweeper software running
* Plug in your [[PSP Street Jigkick]] mini-B USB and have the Baryon Sweeper software running
* Hold down LTrigger + RTrigger + LeftDpad + Circle and turn on the PSP, keep buttons held until the PSP boots into service mode
* Hold down LTrigger + RTrigger + LeftDpad + Circle and turn on the PSP, keep buttons held until the PSP boots into service mode
* The code responsible for this combo is located in street syscon firmware


== Reset System Settings ==
== Reset System Settings ==

Revision as of 00:52, 1 December 2023

PSP-E1000 Factory Service Mode

  • Your PSP must be fully powered off (not in sleep mode)
  • Plug in your PSP Street Jigkick mini-B USB and have the Baryon Sweeper software running
  • Hold down LTrigger + RTrigger + LeftDpad + Circle and turn on the PSP, keep buttons held until the PSP boots into service mode
  • The code responsible for this combo is located in street syscon firmware

Reset System Settings

  • Your PSP must be fully powered off (not in sleep mode)
  • Hold Triangle + Square + Select + Start and turn on the PSP, keep buttons held until the boot animation appears

More System Information

  • Navigate to Settings > System Settings > System Information
  • Hold down LTrigger + RTrigger + Left Dpad + Square for a couple seconds (3) then let go and hold Start to display extra system information
  • To have it remain on screen until you exit System Information, press Left Dpad while holding Start, then release both