Button Combos: Difference between revisions

From PSP Developer wiki
Jump to navigation Jump to search
(Added "Reset System Settings", general cleanup, re-worded instructions to be more clear)
Line 1: Line 1:
== PSP-E1000 Factory Service Mode ==
== PSP-E1000 Factory Service Mode ==
* Your PSP must be fully powered off (not in sleep mode)
* Your PSP must be fully powered off (not in sleep mode)
* Plug in your [[PSP Street Jigkick]] USB mini-B and have the Baryon Sweeper software running
* Plug in your [[PSP Street Jigkick]] mini-B USB and have the Baryon Sweeper software running
* Hold down LTrigger + RTrigger + LeftDpad + Circle and turn on the PSP, keep buttons held until the PSP boots into service mode
* Hold down LTrigger + RTrigger + LeftDpad + Circle and turn on the PSP, keep buttons held until the PSP boots into service mode



Revision as of 07:22, 30 November 2023

PSP-E1000 Factory Service Mode

  • Your PSP must be fully powered off (not in sleep mode)
  • Plug in your PSP Street Jigkick mini-B USB and have the Baryon Sweeper software running
  • Hold down LTrigger + RTrigger + LeftDpad + Circle and turn on the PSP, keep buttons held until the PSP boots into service mode

Reset System Settings

  • Your PSP must be fully powered off (not in sleep mode)
  • Hold Triangle + Square + Select + Start and turn on the PSP, keep held until the boot animation appears

More System Information

  • Navigate to Settings > System Settings > System Information
  • Hold down LTrigger + RTrigger + Left Dpad + Square for a couple seconds (3) then let go and hold Start to display extra system information
  • To have it remain on screen until you exit System Information, press Left Dpad while holding Start, then release both