Editing POPS

Jump to navigation Jump to search
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 47: Line 47:
     1 = Related to Drawing Area right X2 coordinate (it seems to crop right side of drawing area by 1 pixel)
     1 = Related to Drawing Area right X2 coordinate (it seems to crop right side of drawing area by 1 pixel)
     2 = Used in GP0(A0h) handler.
     2 = Used in GP0(A0h) handler.
     3 = Force NTSC timings. While this setting should only affect PAL releases, sony for some reason used it also on 5 NTSC releases.
     3 = Force NTSC timings. While this setting should only affect PAL releases, sony for some reason used it also on 4 NTSC releases.
         FUTURE COP L.A.P.D, NUCLEAR SRTIKE, SOVIET STRIKE, VIB RIBBON and WING COMMANDER IV. This could be simply copy paste error from PAL releases (NUCLEAR STRIKE's config is copied over from SOVIET STRIKE). Use only in conjunction with command 0x0B, otherwise no image is displayed.
         FUTURE COP L.A.P.D, SOVIET STRIKE, VIB RIBBON and WING COMMANDER IV. This could be simply copy paste error from PAL releases. Use only in conjunction with command 0x0B, otherwise no image is displayed.
     4 = Used in gpu dma related function.
     4 = Used in gpu dma related function.
     5 = Used in GP0(2x-3xh) commands handler.
     5 = Used in GP0(2x-3xh) commands handler.
Line 55: Line 55:
     7 = Spu irq address (0x1F801DA4) related setting.
     7 = Spu irq address (0x1F801DA4) related setting.
     8 = Spu reverb related setting.
     8 = Spu reverb related setting.
     9 = Spu dma related setting. Return 1 instead of transferred size. Probably hack to make SPU DMA chunk transfer to always take 1 cycle.
     9 = Spu dma related setting.
   10 = Cdrom Play cmd related, active only when cdr mode REPORT bit is enabled.
   10 = Cdrom related, when enabled seems to update msf/lba more frequently.
   12 = While this bit is used in Timers event related function, it's really affecting SPU code. When bit is active SPU related internal counters are not updated.
   12 = Counters/timers related setting.
        Worth to add that mentioned SPU counters are also not updated if currently checked Timer counter is 0x4000 or lower at this point,
        but are updated for example on applying volume by cdr register write... Seems to be very specific hack.
   13 = Cdrom related setting. When enabled max_disc_lba_without_lead_out is used instead of second_track_lba in one function.
   13 = Cdrom related setting. When enabled max_disc_lba_without_lead_out is used instead of second_track_lba in one function.
        This config practically does what cdda enabler plugin did, same branch that is patched by cdda enabler is forced to be true here.
        Warning! This bit is patched to be ALWAYS ENABLED for custom eboots in Vita Adrenaline. This is bad idea and can affect compatibility.
   15 = Allows discs to be swapped when game didn't request to change ps1 gpu drawing parameters for long enough (60x this check).
   15 = Allows discs to be swapped when game didn't request to change ps1 gpu drawing parameters for long enough (60x this check).
   16 = Skip some additional checks for Pause/ReadS/ReadN/GetTN/Setmode cmds during cdrom command processing.
   16 = Skip some additional checks for Pause/ReadS/ReadN/GetTN/Setmode cmds during cdrom command processing.
   17 = Used in MDEC related functions.
   17 = Used in MDEC related functions.  
  18 = Load/Store opcodes related. When other conditions are met, skips some code.
  19 = Skip great chunk of code in Load/Store opcodes emitter, but only if rs is 29 (when load/store use stack pointer as base address).
   20 = Use second nBuf in sceCtrlPeekBufferNegative instead of first one and change controller sampling cycles from 0 to 8341 in sceCtrlSetSamplingCycle.
   20 = Use second nBuf in sceCtrlPeekBufferNegative instead of first one and change controller sampling cycles from 0 to 8341 in sceCtrlSetSamplingCycle.
   23 = Allows discs to be swapped at any time, regardless of game prompting to or not.
   23 = Allows discs to be swapped at any time, regardless of game prompting to or not.
Line 88: Line 82:
| 0x01 || No || Set minimal "Y2" drawing area. This setting overrides what game set in GP0(E4h) command (Set Drawing Area bottom Y2 coordinate). Setting is used only when given value is lower than what game originally sends. In simple words, this work as a crop for the bottom of drawing area. ''Warning! This setting can have bad effect when copied straight from PAL to NTSC game and vice versa.''
| 0x01 || No || Set minimal "Y2" drawing area. This setting overrides what game set in GP0(E4h) command (Set Drawing Area bottom Y2 coordinate). Setting is used only when given value is lower than what game originally sends. In simple words, this work as a crop for the bottom of drawing area. ''Warning! This setting can have bad effect when copied straight from PAL to NTSC game and vice versa.''
|-
|-
| 0x02 || No || Set minimal "Y1" drawing area. Value is rows of pixels to crop from top of screen.
| 0x02 || Unk ||
|-
|-
| 0x03 || No || Crop MDEC video drawing only. Value is rows of pixels to crop from top of screen.
| 0x03 || Unk ||
|-
|-
| 0x04 || Yes || This config is multi-command for cdrom behavior. Value is bitfield, but not usual one. This config default value is 0xFFFFFFFF, to "enable" bits we need to really disable them. Windows programmer mode calculator in dword mode should shed some light here. To see enabled bits just use NOT operator. Vita use 3 additional (10/11/12) bits not available on PSP.
| 0x04 || Yes || This config is multi-command for cdrom behavior. Value is bitfield, but not usual one. This config default value is 0xFFFFFFFF, to "enable" bits we need to really disable them. Windows programmer mode calculator in dword mode should shed some light here. To see enabled bits just use NOT operator. Vita use 3 additional (10/11/12) bits not available on PSP.
  bit:
  bit:
    0 = Used in function which perform seek to sector.
    1 = Used in function which perform seek to sector. When enabled fast seek takes 3 times more cycles, and slow seek takes 8 times more cycles.
     2 = Used in cdr Pause command. When enabled something takes 6 times more cycles than normally.
     2 = Used in cdr Pause command. When enabled something takes 6 times more cycles than normally.
         Seems to be related to motor stop timing, maybe how long it takes on idle before motor is stopped?
         Seems to be related to motor stop timing, maybe how long it takes on idle before motor is stopped?
    4 = Used in function which perform seek to sector. Seems to force seek time to take no longer than 1185408 cycles.
    5 = Used in function which perform seek to sector.
    6 = Used in Read commands. Enabled adds 5419008 cycles, but only if there is no pending setloc. 
     7 = Used in Setmode cdr command. When new bits of mode register request speed change and motor is on,
     7 = Used in Setmode cdr command. When new bits of mode register request speed change and motor is on,
         unknown event (likely speed change) will take 10000 instead of 33868800 cycles.
         unknown event (likely speed change) will take 10000 instead of 33868800 cycles.
     8 = Unknown, used in GetlocP cdr command.
     8 = Unknown, used in GetlocP cdr command.
  vita only bits:
  vita only bits:
   10 = When reading cdr status register if BFRD bit of request register is active force DRQSTS bit in status register to 1.
   10 = When reading cdr status register if BFRD bit of request register is active force DRQSTS bit in status register to 1.
Line 166: Line 154:
  Additionally on Vita this command has "hidden" setting by bit 18. This setting is seeming to be not available on PSP
  Additionally on Vita this command has "hidden" setting by bit 18. This setting is seeming to be not available on PSP
|-
|-
| 0x15 || No || Set shell open for little longer during disc swap. Some games take a while to realize that shell is opened, this setting helps them. Value is multiplier for predefined value, 1 is taking around 3,5 seconds, 2 around 7 seconds, etc.
| 0x15 || No || Cdrom related.
|-
|-
| 0x16 || No || When value is not less than 0, run some additional code related to vblank (seems to be scheduling some event).
| 0x16 || No || When value is not less than 0, run some additional code related to vblank (seems to be scheduling some event).
Line 189: Line 177:
     3 = SPU related
     3 = SPU related
     4 = SPU related
     4 = SPU related
     5 = Enable to trigger additional checks for SPU status register, and eventually raise IRQ if needed.
     5 = SPU related
     6 = SPU related
     6 = SPU related
     7 = SPU related
     7 = SPU related
Please note that all contributions to PSP Developer wiki are considered to be released under the GNU Free Documentation License 1.2 (see PSP Developer wiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To protect the wiki against automated edit spam, we kindly ask you to solve the following hCaptcha:

Cancel Editing help (opens in new window)
Retrieved from "http://www.psdevwiki.com/psp/POPS"